Skip Headers
Oracle® Fusion Middleware Desktop Integration Developer's Guide for Oracle Application Development Framework
11g Release 1 (11.1.1.6.0)

Part Number E10139-05
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

3 Setting Up Your Development Environment

This chapter describes how to set up the development environment to integrate an Excel workbook with a Fusion web application, how to upgrade and remove ADF Desktop Integration, and how to localize the Visual Studio tools for Microsoft Office.

This chapter includes the following sections:

3.1 Introduction to Setting Up Your Development Environment

Setting up your development environment involves making sure that you have the correct versions of JDeveloper, Microsoft Office, and Microsoft Internet Explorer installed. You must also enable support for Microsoft .NET programmability, if it is not enabled. After you verify that you have the required software and enabled Microsoft .NET programmability, complete the setup of your development environment by:

3.2 Required Oracle ADF Modules and Third-Party Software

Before you begin to integrate your Excel workbook with a Fusion web application, ensure that you have the required Oracle ADF modules and third-party software installed and configured:

3.3 Enabling Microsoft .NET Programmability Support

Microsoft Excel must have Microsoft .NET programmability support enabled before you can set up ADF Desktop Integration and start development of an Excel workbook that integrates with a Fusion web application. If you enabled Microsoft .NET programmability support during installation of Microsoft Excel, no further action is required.

To enable Microsoft .NET programmability support:

  1. Click the Windows Start button, and choose Settings > Control Panel.

  2. In the Control Panel, select and open Add or Remove Programs.

  3. Select the entry in the Add or Remove Programs dialog for Microsoft Office and click Change.

  4. Follow the instructions in the wizard that appears to enable Microsoft .NET programmability support for Microsoft Excel.

3.4 Allowing ADF Desktop Integration to Access Microsoft Excel

You must configure Microsoft Excel settings to make it accessible from ADF Desktop Integration. You only need to perform this procedure once.

To allow Excel to run an integrated Excel workbook:

  1. Open Excel.

  2. Click the Microsoft Office button, and choose Excel Options.

  3. In the Excel Options dialog, choose the Trust Center tab, and then click Trust Center Settings.

  4. In the Trust Center dialog, choose the Macro Settings tab, and then click the Trust access to the VBA project object model checkbox.

  5. Click OK.

For more information about securing an Excel workbook that is integrated with a Fusion web application, see Chapter 11, "Securing Your Integrated Excel Workbook."

3.5 Installing ADF Desktop Integration

When you run the ADF Desktop Integration setup tool, it verifies whether software in the following list is installed on the system where you want to install the framework. If one or more of these pieces of software is not installed, the setup tool installs it in the order specified.

  1. Windows Installer 3.1

  2. Microsoft .NET Framework

    The Microsoft .NET Framework 3.5 Service Pack 1 provides the runtime and associated files required to run applications developed to target the Microsoft .NET Framework.

    Note:

    Installation of Microsoft .NET Framework may require you to restart the system where you install it. After you restart, the setup tool automatically recommences to finalize installation.
  3. Microsoft Visual Studio Tools for Microsoft Office

    The Microsoft Visual Studio Tools for the Microsoft Office system (version 3.0 Runtime) Service Pack 1 (x86) is required to run VSTO solutions for the Microsoft Office system.

  4. ADF Desktop Integration add-in

    You can install the ADF Desktop Integration add-in from JDeveloper, or from the setup tool provided in MW_HOME\jdeveloper\adfdi. For more information about how to set up ADF Desktop Integration, see Section 3.5.1, "How to Set Up ADF Desktop Integration."

    Note that the ADF Desktop Integration installation is specific to the current Windows user profile. If you have multiple Windows user profiles on your system, and you want to use ADF Desktop Integration integrated Excel workbooks from some specific user profiles, you must log in to each user profile and install the ADF Desktop Integration add-in. For more information, see Section 3.5.1, "How to Set Up ADF Desktop Integration."

3.5.1 How to Set Up ADF Desktop Integration

The ADF Desktop Integration add-in is available in two editions, the Designer edition and the Runtime edition. You must use the Designer edition to create and test integrated Excel workbooks, and the Runtime edition to enable end users to use ADF Desktop Integration and integrated Excel workbooks.

Note:

Do not install both editions of ADF Desktop Integration on the same system.

Although you do not require administrator privileges to install the ADF Desktop Integration add-in, administrator privileges may be required to run the installers for additional software that the installer attempts to download and install. You should also ensure that the proxy settings for Internet Explorer are configured to allow access to *.microsoft.com because the installer attempts to automatically download missing prerequisite software from Microsoft's web site.

By default, the installer runs in English. You can change the language that appears by following the instructions in Section 3.9, "Localizing the Setup of Visual Studio Tools for Office."

To install the Designer edition of ADF Desktop Integration:

  1. Open JDeveloper.

  2. From the Tools menu, choose Install ADF Desktop Integration.

  3. Follow the instructions that appear in the dialog boxes to successfully install the required components.

    If you encounter an error during the installation process, ensure that you have removed the previous version of ADF Desktop Integration. For more information, see Section 3.6, "Removing ADF Desktop Integration."

  4. If prompted, click Yes to restart the system and complete the setup of ADF Desktop Integration.

Tip:

You can also install the Designer edition of ADF Desktop Integration by running the setup.exe tool available in the MW_HOME\jdeveloper\adfdi\bin\excel\addin\designer directory.

Note:

The Install ADF Desktop Integration menu option is available only on the Windows installation of JDeveloper.

If you use multiple instances of JDeveloper or if you have an existing instance of the ADF Desktop Integration add-in on the system where you plan to invoke the setup.exe tool, review the information in Section 3.8, "Using ADF Desktop Integration on a System with Multiple Instances of JDeveloper" before you perform the installation procedure.

If you want to install the Runtime edition of ADF Desktop Integration, see Section I.1, "Installing the Runtime Edition of ADF Desktop Integration."

3.6 Removing ADF Desktop Integration

You use the Microsoft Windows Control Panel to remove the ADF Desktop Integration add-in from the system where you set it up. After you remove the ADF Desktop Integration add-in, you can no longer use integrated Excel workbooks on this system unless you reinstall the add-in.

To remove the ADF Desktop Integration add-in:

  1. Click the Windows Start button and then choose Settings > Control Panel.

  2. In the Control Panel, select and open Add or Remove Programs.

  3. In the Add or Remove Programs dialog, select the installed ADF Desktop Integration add-in edition, and then click Remove.

Note:

If you have installed ADF Desktop Integration on multiple user profiles, you must remove it from each user profile.

3.7 Upgrading ADF Desktop Integration

If you are using an old version of the ADF Desktop Integration add-in, you must upgrade to the current version.

To upgrade the ADF Desktop Integration add-in:

  1. Uninstall the old version of the ADF Desktop Integration add-in. For more information, see Section 3.6, "Removing ADF Desktop Integration."

  2. Download and install the latest version of Oracle JDeveloper.

  3. Install the new version of the ADF Desktop Integration add-in. For more information, see Section 3.5, "Installing ADF Desktop Integration."

Note:

If you do not uninstall the old version of ADF Desktop Integration add-in, an error occurs unless the new installer is in the exact same location as the old installer.

3.7.1 How to Migrate an Integrated Excel Workbook to the Current Version of ADF Desktop Integration

When you open the integrated Excel workbook after upgrading the ADF Desktop Integration add-in, the add-in detects and compares the ADF Desktop Integration version information of the workbook with the version installed on the client system. If required, you are asked to upgrade the metadata of the integrated workbook to the version installed on the client.

To migrate an integrated Excel workbook after upgrading:

  1. Open the integrated Excel workbook.

    The Migrate Workbook dialog prompts you to migrate the workbook to the current version of ADF Desktop Integration, as shown in Figure 3-1.

    Figure 3-1 Migrate Workbook Dialog

    Migrate Workbook dialog box

    If you get one or more Microsoft Office Customization Installer error messages when you open the integrated Excel workbook, ignore the messages and continue. The error messages appear because ADF Desktop Integration cannot remove the old version information from the workbook before Excel detects it and reports the error.

  2. Click Yes to migrate the workbook. The ADF Desktop Integration migration process closes the workbook and then reopens it, ready to be used with the current version of ADF Desktop Integration.

3.8 Using ADF Desktop Integration on a System with Multiple Instances of JDeveloper

You can have only one active installation of ADF Desktop Integration on a given system. By default, when you install JDeveloper, ADF Desktop Integration is extracted to MW_HOME\jdeveloper\adfdi . If you decide to move to another version of JDeveloper in a different directory, you must remove the old version of ADF Desktop Integration, as described in Section 3.6, "Removing ADF Desktop Integration." You must then set up ADF Desktop Integration with the new version of JDeveloper that you are moving to, as described in Section 3.5, "Installing ADF Desktop Integration."

Alternatively, you can set up ADF Desktop Integration in a directory that is independent of your JDeveloper installation. This approach means that you do not have to remove ADF Desktop Integration before moving to a newer version.

To set up ADF Desktop Integration in an independent directory:

  1. Create a directory independent of the JDeveloper installation directory. For example, you may create the following directory:

    D:\adfdi-excel-setup

  2. When you move to a newer version of JDeveloper, copy the contents of the following directory:

    MW_HOME\jdeveloper\adfdi\bin\excel\addin\designer

    to:

    D:\adfdi-excel-setup

    where MW_HOME is the the Middleware Home directory.

  3. Run the setup.exe tool located in D:\adfdi-excel-setup.

  4. Follow the instructions that appear in the dialog boxes launched by setup.exe to set up the new version of ADF Desktop Integration.

  5. If prompted, click Yes to restart the system and complete the setup of ADF Desktop Integration.

WARNING:

After you install ADF Desktop Integration, do not delete the directory where you copied the setup files. You can delete the files after removing ADF Desktop Integration from the system.

3.9 Localizing the Setup of Visual Studio Tools for Office

Follow the instructions in this section to localize the setup of Visual Studio Tools for Office. By default, the installer described in Section 3.5, "Installing ADF Desktop Integration", runs in English. You can download and install a different language pack from the Microsoft Download Center for the language that you want to appear when the installer runs.

This section assumes that no instance of ADF Desktop Integration is present on your system and that your system uses a non-English version of the operating system. If ADF Desktop Integration is present, remove it as described in Section 3.6, "Removing ADF Desktop Integration."

For information about supported operating systems, see Section 3.2, "Required Oracle ADF Modules and Third-Party Software."

To localize the setup of Visual Studio Tools for Office:

  1. Download the appropriate language pack (for example, French) for Microsoft Visual Studio Tools for Microsoft Office from the Microsoft Download Center at:

    http://www.microsoft.com/downloads/

  2. Install the language pack that you downloaded in Step 1.

  3. Set up ADF Desktop Integration, as described in Section 3.5, "Installing ADF Desktop Integration."