Authentication is the mechanism by which callers prove that they are acting on behalf of specific users or systems. Authentication answers the question, "Who are you?" using credentials such as username/password combinations.
In WebLogic Server, Authentication providers are used to prove the identity of users or system processes. Authentication providers also remember, transport, and make that identity information available to various components of a system (via subjects) when needed. During the authentication process, a Principal Validation provider provides additional security protections for the principals (users and groups) contained within the subject by signing and verifying the authenticity of those principals. (For more information, see Chapter 6, "Principal Validation Providers.")
The following sections describe Authentication provider concepts and functionality, and provide step-by-step instructions for developing a custom Authentication provider:
How to Develop a Custom Authentication Provider
Note:
An Identity Assertion provider is a specific form of Authentication provider that allows users or system processes to assert their identity using tokens. For more information, see Chapter 5, "Identity Assertion Providers."Before delving into the specifics of developing custom Authentication providers, it is important to understand the following concepts:
A user is similar to an operating system user in that it represents a person. A group is a category of users, classified by common traits such as job title. Categorizing users into groups makes it easier to control the access permissions for large numbers of users. For more information about users and groups, see "Users, Groups, and Security Roles" in Securing Resources Using Roles and Policies for Oracle WebLogic Server.
Both users and groups can be used as principals by application servers like WebLogic Server. A principal is an identity assigned to a user or group as a result of authentication. The Java Authentication and Authorization Service (JAAS) requires that subjects be used as containers for authentication information, including principals. Each principal stored in the same subject represents a separate aspect of the same user's identity, much like cards in a person's wallet. (For example, an ATM card identifies someone to their bank, while a membership card identifies them to a professional organization to which they belong.) For more information about JAAS, see Java Authentication and Authorization Service (JAAS).
Note:
Subjects replace WebLogic Server 6.x users.Figure 4-1 illustrates the relationships among users, groups, principals, and subjects.
Figure 4-1 Relationships Among Users, Groups, Principals and Subjects
As part of a successful authentication, principals are signed and stored in a subject for future use. A Principal Validation provider signs principals, and an Authentication provider's LoginModule actually stores the principals in the subject. Later, when a caller attempts to access a principal stored within a subject, a Principal Validation provider verifies that the principal has not been altered since it was signed, and the principal is returned to the caller (assuming all other security conditions are met).
Note:
For more information about Principal Validation providers and LoginModules, see Chapter 6, "Principal Validation Providers" and LoginModules, respectively.Any principal that is going to represent a WebLogic Server user or group needs to implement the WLSUser
and WLSGroup
interfaces, which are available in the weblogic.security.spi
package.
Authentication providers need a list of users and groups before they can be used to perform authentication in a running WebLogic Server. Some Authentication providers let the administrator configure an external database (for example, add the users and groups to an LDAP server or a DBMS) and then configure the provider to use that database. These providers don't have to worry about how the users and groups are populated because the administrator does that first, using the external database's tools.
However, some Authentication providers create and manage their own list of users and groups. This is the case for the ManageableSampleAuthenticator provider (available at https://codesamples.samplecode.oracle.com/servlets/tracking?id=S224
on the Oracle Technology Network Web site). These providers need to worry about how their initial set of users and groups is populated. One way to handle this is for the provider's "initialize" method to notice that the users and groups don't exist yet, and then populate the list with an initial set of users and groups.
Note that some providers have a separate list of users and groups for each security realm, and therefore need to create an initial set of users and groups the first time the list is used in a new realm. For example, the ManageableSampleAuthenticator provider creates a separate properties file of users and groups for each realm. Its initialize
method gets the realm name, determines whether the properties file for that realm exists and, if not, creates one, populating it with its initial set of users and groups.
A LoginModule is a required component of an Authentication provider, and can be a component of an Identity Assertion provider if you want to develop a separate LoginModule for perimeter authentication.
LoginModules are the work-horses of authentication: all LoginModules are responsible for authenticating users within the security realm and for populating a subject with the necessary principals (users/groups). LoginModules that are not used for perimeter authentication also verify the proof material submitted (for example, a user's password).
Note:
For more information about Identity Assertion providers and perimeter authentication, see Chapter 5, "Identity Assertion Providers."If there are multiple Authentication providers configured in a security realm, each of the Authentication providers' LoginModules will store principals within the same subject. Therefore, if a principal that represents a WebLogic Server user (that is, an implementation of the WLSUser
interface) named "Joe" is added to the subject by one Authentication provider's LoginModule, any other Authentication provider in the security realm should be referring to the same person when they encounter "Joe". In other words, the other Authentication providers' LoginModules should not attempt to add another principal to the subject that represents a WebLogic Server user (for example, named "Joseph") to refer to the same person. However, it is acceptable for a another Authentication provider's LoginModule to add a principal of a type other than WLSUser
with the name "Joseph".
LoginModules can be written to handle a variety of authentication mechanisms, including username/password combinations, smart cards, biometric devices, and so on. You develop LoginModules by implementing the javax.security.auth.spi.LoginModule
interface, which is based on the Java Authentication and Authorization Service (JAAS) and uses a subject as a container for authentication information. The LoginModule
interface enables you to plug in different kinds of authentication technologies for use with a single application, and the WebLogic Security Framework is designed to support multiple LoginModule
implementations for multipart authentication. You can also have dependencies across LoginModule instances or share credentials across those instances. However, the relationship between LoginModules and Authentication providers is one-to-one. In other words, to have a LoginModule that handles retina scan authentication and a LoginModule that interfaces to a hardware device like a smart card, you must develop and configure two Authentication providers, each of which include an implementation of the LoginModule
interface. For more information, see Implement the JAAS LoginModule Interface.
Note:
You can also obtain LoginModules from third-party security vendors instead of developing your own.The way you configure multiple Authentication providers (and thus, multiple LoginModules) can affect the overall outcome of the authentication process, which is especially important for multipart authentication. First, because LoginModules are components of Authentication providers, they are called in the order in which the Authentication providers are configured. Generally, you configure Authentication providers using the WebLogic Server Administration Console. (For more information, see Specifying the Order of Authentication Providers.) Second, the way each LoginModule's control flag is set specifies how a failure during the authentication process should be handled. Figure 4-2 illustrates a sample flow involving three different LoginModules (that are part of three Authentication providers), and illustrates what happens to the subject for different authentication outcomes.
If the control flag for Custom Authentication Provider #1 had been set to Required, the authentication failure in its User Authentication step would have caused the entire authentication process to have failed. Also, if the user had not been authenticated by the WebLogic Authentication provider (or custom Authentication provider #2), the entire authentication process would have failed. If the authentication process had failed in any of these ways, all three LoginModules would have been rolled back and the subject would not contain any principals.
Note:
For more information about the LoginModule control flag setting and the LoginModule interface, see the Java Authentication and Authorization Service (JAAS) 1.0 LoginModule Developer's Guide (http://download.oracle.com/javase/6/docs/technotes/guides/security/
) and the Java SE 6.0 API Specification for the LoginModule interface (http://download.oracle.com/javase/6/docs/api/javax/security/auth/spi/LoginModule.html
), respectively.Whether the client is an application, applet, Enterprise JavaBean (EJB), or servlet that requires authentication, WebLogic Server uses the Java Authentication and Authorization Service (JAAS) classes to reliably and securely authenticate to the client. JAAS implements a Java version of the Pluggable Authentication Module (PAM) framework, which permits applications to remain independent from underlying authentication technologies. Therefore, the PAM framework allows the use of new or updated authentication technologies without requiring modifications to your application.
WebLogic Server uses JAAS for remote fat-client authentication, and internally for authentication. Therefore, only developers of custom Authentication providers and developers of remote fat client applications need to be involved with JAAS directly. Users of thin clients or developers of within-container fat client applications (for example, those calling an Enterprise JavaBean (EJB) from a servlet) do not require the direct use or knowledge of JAAS.
Generically, authentication using the JAAS classes and WebLogic Security Framework is performed in the following manner:
A client-side application obtains authentication information from a user or system process. The mechanism by which this occurs is different for each type of client.
The client-side application can optionally create a CallbackHandler
containing the authentication information.
The client-side application passes the CallbackHandler
to a local (client-side) LoginModule using the LoginContext
class. (The local LoginModule could be UsernamePasswordLoginModule
, which is provided as part of WebLogic Server.)
The local LoginModule passes the CallbackHandler
containing the authentication information to the appropriate WebLogic Server container (for example, RMI, EJB, servlet, or IIOP).
Note:
A CallbackHandler is a highly-flexible JAAS standard that allows a variable number of arguments to be passed as complex objects to a method. There are three types of CallbackHandlers: NameCallback, PasswordCallback, and TextInputCallback, all of which reside in thejavax.security.auth.callback
package. The NameCallback and PasswordCallback return the username and password, respectively. TextInputCallback can be used to access the data users enter into any additional fields on a login form (that is, fields other than those for obtaining the username and password). When used, there should be one TextInputCallback per additional form field, and the prompt string of each TextInputCallback must match the field name in the form. WebLogic Server only uses the TextInputCallback for form-based Web application login. For more information about CallbackHandlers, see the Java SE 6.0 API Specification for the CallbackHandler interface (http://download.oracle.com/javase/6/docs/api/javax/security/auth/callback/CallbackHandler.html
).
For more information about the LoginContext class, see the Java SE 6.0 API Specification for the LoginContext class (http://download.oracle.com/javase/6/docs/api/javax/security/auth/spi/LoginModule.html
).
For more information about the UsernamePasswordLoginModule, see the WebLogic Server API Reference Javadoc for the UsernamePasswordLoginModule class.
If you do not want to use a client-side LoginModule, you can specify the username and password in other ways: for example, as part of the initial JNDI lookup.
The WebLogic Server container calls into the WebLogic Security Framework. If there is a client-side CallbackHandler
containing authentication information, this is passed into the WebLogic Security Framework.
For each of the configured Authentication providers, the WebLogic Security Framework creates a CallbackHandler
using the authentication information that was passed in. (These are internal CallbackHandler
s created on the server-side by the WebLogic Security Framework, and are not related to the client's CallbackHandler
.)
The WebLogic Security Framework calls the LoginModule associated with the Authentication provider (that is, the LoginModule that is specifically designed to handle the authentication information).
Note:
For more information about LoginModules, see LoginModules.The LoginModule attempts to authenticate the client using the authentication information.
If the authentication is successful, the following occurs:
Principals (users and groups) are signed by a Principal Validation provider to ensure their authenticity between programmatic server invocations. For more information about Principal Validation providers, see Chapter 6, "Principal Validation Providers."
The LoginModule associates the signed principals with a subject, which represents the user or system process being authenticated. For more information about subjects and principals, see Users and Groups, Principals and Subjects.
Note:
For authentication performed entirely on the server-side, the process would begin at step 3, and the WebLogic Server container would call theweblogic.security.services.authentication.login
method prior to step 4.Figure 4-3 illustrates how the JAAS classes work with the WebLogic Security Framework for a standalone, T3 application, and an explanation follows.
Figure 4-3 Authentication Using JAAS Classes and WebLogic Server
For this example, authentication using the JAAS classes and WebLogic Security Framework is performed in the following manner:
The T3 application obtains authentication information (username, password, and URL) from a user or system process.
The T3 application creates a CallbackHandler
containing the authentication information.
The T3 application passes the CallbackHandler
to the UsernamePasswordLoginModule
using the LoginContext
class.
Note:
Theweblogic.security.auth.login.UsernamePasswordLoginModule
implements the standard JAAS javax.security.auth.spi.LoginModule
interface and uses client-side APIs to authenticate a WebLogic client to a WebLogic Server instance. It can be used for both T3 and IIOP clients. Callers of this LoginModule must implement a CallbackHandler to pass the username (NameCallback), password (PasswordCallback), and a URL (URLCallback).The UsernamePasswordLoginModule
passes the CallbackHandler
containing the authentication information (that is, username, password, and URL) to the WebLogic Server RMI container.
The WebLogic Server RMI container calls into the WebLogic Security Framework. The client-side CallbackHandler
containing authentication information is passed into the WebLogic Security Framework.
For each of the configured Authentication providers, the WebLogic Security Framework creates a CallbackHandler
containing the username, password, and URL that was passed in. (These are internal CallbackHandler
s created on the server-side by the WebLogic Security Framework, and are not related to the client's CallbackHandler
.)
The WebLogic Security Framework calls the LoginModule associated with the Authentication provider (that is, the LoginModule that is specifically designed to handle the authentication information).
The LoginModule attempts to authenticate the client using the authentication information.
If the authentication is successful, the following occurs:
Principals (users and groups) are signed by a Principal Validation provider to ensure their authenticity between programmatic server invocations.
The LoginModule associates the signed principals with a subject, which represents the user or system being authenticated.
The WebLogic Security Framework returns the authentication status to the T3 client application, and the T3 client application retrieves the authenticated subject from the WebLogic Security Framework.
Figure 4-4 shows a behind-the-scenes look of the authentication process for a fat-client login. JAAS runs on the server to perform the login. Even in the case of a thin-client login (that is, a browser client) JAAS is still run on the server.
Note:
Only developers of custom Authentication providers will be involved with this JAAS process directly. The client application could either use JNDI initial context creation or JAAS to initiate the passing of the username and password.When a user attempts to log into a system using a username/password combination, WebLogic Server establishes trust by validating that user's username and password, and returns a subject that is populated with principals per JAAS requirements. As Figure 4-4 also shows, this process requires the use of a LoginModule and a Principal Validation provider, which are discussed in detail in LoginModules and Chapter 6, "Principal Validation Providers" respectively.
After successfully proving a caller's identity, an authentication context is established, which allows an identified user or system to be authenticated to other entities. Authentication contexts may also be delegated to an application component, allowing that component to call another application component while impersonating the original caller.
The default (that is, active) security realm for WebLogic Server includes a WebLogic Authentication provider.
Note:
In conjunction with the WebLogic Authorization provider, the WebLogic Authentication provider replaces the functionality of the File realm that was available in 6.x releases of WebLogic Server.The WebLogic Authentication provider supports delegated username/password authentication, and utilizes an embedded LDAP server to store user and group information. The WebLogic Authentication provider allows you to edit, list, and manage users and group membership.
WebLogic Server also provides the following additional Authentication providers that you can use instead of or in conjunction with the WebLogic Authentication provider in the default security realm:
A set of LDAP Authentication providers that access external LDAP stores (including Open LDAP, iPlanet, Microsoft Active Directory, and Novell NDS).
A set of Database Base Management System (DBMS) authentication providers that access user, password, group, and group membership information stored in databases for authentication
A Windows NT Authentication provider that uses Windows NT users and groups for authentication purposes.
An LDAP X509 Identity Assertion provider.
By default, these additional Authentication providers are available but not configured in the WebLogic default security realm.
If you want to perform additional authentication tasks, then you need to develop a custom Authentication provider.
Note:
If you want to perform perimeter authentication using a token type that is not supported out of the box (for example, a new, custom, or third party token type), you might need to develop a custom Identity Assertion provider. For more information, see Chapter 5, "Identity Assertion Providers."If the WebLogic Authentication provider does not meet your needs, you can develop a custom Authentication provider by following these steps:
Before you start creating runtime classes, you should first:
When you understand this information and have made your design decisions, create the runtime classes for your custom Authentication provider by following these steps:
For an example of how to create a runtime class for a custom Authentication provider, see Example: Creating the Runtime Classes for the Sample Authentication Provider.
Note:
TheAuthenticationProvider
SSPI is deprecated in this release of WebLogic Server. Use the AuthenticationProviderV2
SSPI instead.To implement the AuthenticationProviderV2
SSPI, provide implementations for the methods described in Understand the Purpose of the "Provider" SSPIs and the following methods:
getLoginModuleConfiguration
public AppConfigurationEntry getLoginModuleConfiguration()
The getLoginModuleConfiguration
method obtains information about the Authentication provider's associated LoginModule, which is returned as an AppConfigurationEntry
. The AppConfigurationEntry
is a Java Authentication and Authorization Service (JAAS) class that contains the classname of the LoginModule; the LoginModule's control flag (which was passed in via the Authentication provider's associated MBean); and a configuration options map for the LoginModule (which allows other configuration information to be passed into the LoginModule).
For more information about the AppConfigurationEntry
class (located in the javax.security.auth.login
package) and the control flag options for LoginModules, see the Java SE 6.0 API Specification for the AppConfigurationEntry class (http://download.oracle.com/javase/6/docs/api/javax/security/auth/login/AppConfigurationEntry.html
) and the Configuration class (http://download.oracle.com/javase/6/docs/api/javax/security/auth/login/Configuration.html
). For more information about LoginModules, see LoginModules. For more information about security providers and MBeans, see Understand Why You Need an MBean Type.
getAssertionModuleConfiguration
public AppConfigurationEntry getAssertionModuleConfiguration()
The getAssertionModuleConfiguration
method obtains information about an Identity Assertion provider's associated LoginModule, which is returned as an AppConfigurationEntry
. The AppConfigurationEntry
is a JAAS class that contains the classname of the LoginModule; the LoginModule's control flag (which was passed in via the Identity Assertion provider's associated MBean); and a configuration options map for the LoginModule (which allows other configuration information to be passed into the LoginModule).
Notes:
The implementation of thegetAssertionModuleConfiguration
method can be to return null, if you want the Identity Assertion provider to use the same LoginModule as the Authentication provider.
The assertIdentity() method of an Identity Assertion provider is called every time identity assertion occurs, but the LoginModules may not be called if the Subject is cached. The -Dweblogic.security.identityAssertionTTL
flag can be used to affect this behavior (for example, to modify the default TTL of 5 minutes or to disable the cache by setting the flag to -1).
It is the responsibility of the Identity Assertion provider to ensure not just that the token is valid, but also that the user is still valid (for example, the user has not been deleted).
To use the EJB <run-as-principal> element with a custom Authentication provider, use the getAssertionModuleConfiguration()
method. This method performs the identity assertion that validates the principal specified in the <run-as-principal>element.
getPrincipalValidator
public PrincipalValidator getPrincipalValidator()
The getPrincipalValidator
method obtains a reference to the Principal Validation provider's runtime class (that is, the PrincipalValidator
SSPI implementation). In most cases, the WebLogic Principal Validation provider can be used (see Example 4-1 for an example of how to return the WebLogic Principal Validation provider). For more information about Principal Validation providers, see Chapter 6, "Principal Validation Providers."
getIdentityAsserter
public IdentityAsserterV2 getIdentityAsserter()
The AuthenticationProviderV2 getIdentityAsserter
method obtains a reference to the new Identity Assertion provider's runtime class (that is, the IdentityAsserterV2
SSPI implementation).
In most cases, the return value for this method will be null
(see Example 4-1 for an example). For more information about Identity Assertion providers, see Chapter 5, "Identity Assertion Providers."
For more information about the AuthenticationProviderV2
SSPI and the methods described above, see the WebLogic Server API Reference Javadoc.
To implement the JAAS javax.security.auth.spi.LoginModule
interface, provide implementations for the following methods:
initialize
public void initialize (Subject subject, CallbackHandler callbackHandler, Map sharedState, Map options)
The initialize
method initializes the LoginModule. It takes as arguments a subject in which to store the resulting principals, a CallbackHandler
that the Authentication provider will use to call back to the container for authentication information, a map of any shared state information, and a map of configuration options (that is, any additional information you want to pass to the LoginModule).
A CallbackHandler
is a highly-flexible JAAS standard that allows a variable number of arguments to be passed as complex objects to a method. For more information about CallbackHandler
s, see the Java SE 6.0 API Specification for the CallbackHandler interface (http://download.oracle.com/javase/6/docs/api/javax/security/auth/callback/CallbackHandler.html
).
login
public boolean login() throws LoginException
The login
method attempts to authenticate the user and create principals for the user by calling back to the container for authentication information. If multiple LoginModules are configured (as part of multiple Authentication providers), this method is called for each LoginModule in the order that they are configured. Information about whether the login was successful (that is, whether principals were created) is stored for each LoginModule.
commit
public boolean commit() throws LoginException
The commit
method attempts to add the principals created in the login
method to the subject. This method is also called for each configured LoginModule (as part of the configured Authentication providers), and executed in order. Information about whether the commit was successful is stored for each LoginModule.
abort
public boolean abort() throws LoginException
The abort
method is called for each configured LoginModule (as part of the configured Authentication providers) if any commits for the LoginModules failed (in other words, the relevant REQUIRED
, REQUISITE
, SUFFICIENT
and OPTIONAL
LoginModules did not succeed). The abort
method will remove that LoginModule's principals from the subject, effectively rolling back the actions performed. For more information about the available control flag settings, see the Java SE 6.0 API Specification for the LoginModule interface (http://download.oracle.com/javase/6/docs/api/javax/security/auth/spi/LoginModule.html
).
logout
public boolean logout() throws LoginException
The logout
method attempts to log the user out of the system. It also resets the subject so that its associated principals are no longer stored.
Note:
TheLoginModule.logout
method is never called for the WebLogic Authentication providers or custom Authentication providers. This is simply because once the principals are created and placed into a subject, the WebLogic Security Framework no longer controls the lifecycle of the subject. Therefore, the developer-written, user code that creates the JAAS LoginContext to login and obtain the subject should also call the LoginContext.logout method. When the user code runs in a Java client that uses JAAS directly, that code has the option of calling the LoginContext.logout method, which clears the subject. When the user code runs in a servlet, the servlet has the ability to logout a user from a servlet session, which clears the subject.For more information about the JAAS LoginModule
interface and the methods described above, see the Java Authentication and Authorization Service (JAAS) 1.0 Developer's Guide (http://download.oracle.com/javase/6/docs/technotes/guides/security/jaas/JAASRefGuide.html
), and the Java SE 6.0 API Specification for the LoginModule interface (http://download.oracle.com/javase/6/docs/api/javax/security/auth/spi/LoginModule.html
).
You may want to throw a custom exception from a LoginModule you write. The custom exception can then be caught by your application and appropriate action taken. For example, if a PasswordChangeRequiredException
is thrown from your LoginModule, you can catch that exception within your application, and use it to forward users to a page that allows them to change their password.
When you throw a custom exception from a LoginModule and want to catch it within your application, you must ensure that:
The application catching the exception is running on the server. (Fat clients cannot catch custom exceptions.)
Your servlet has access to the custom exception class at both compile time and deploy time. You can do this using either of the following methods, depending on your preference:
Write an exception class that extends LoginException
.
Use the custom exception class in your classes that implement the LoginModule
and AuthenticationProvider
interfaces.
Put the custom exception class in both the system and compiler classpath when compiling the security provider's runtime class.
Write an exception class that extends LoginException
.
Use the custom exception class in your classes that implement the LoginModule
and AuthenticationProvider
interfaces.
Put the custom exception's source in the classpath of the application's build, and include it in the classpath of the application's JAR/WAR file.
Add the custom exception class to the MJF (MBean JAR File) generated by the WebLogic MBeanMaker.
Include the MJF when compiling your application.
Example 4-1 shows the SimpleSampleAuthenticationProviderImpl.java
class, which is one of two runtime classes for the sample Authentication provider. This runtime class includes implementations for:
The three methods inherited from the SecurityProvider
interface: initialize
, getDescription
and shutdown
(as described in Understand the Purpose of the "Provider" SSPIs.)
The four methods in the AuthenticationProviderV2
SSPI: the getLoginModuleConfiguration
, getAssertionModuleConfiguration
, getPrincipalValidator
, and getIdentityAsserter
methods (as described in Implement the AuthenticationProviderV2 SSPI).
Note:
The bold face code in Example 4-1 highlights the class declaration and the method signatures.Example 4-1 SimpleSampleAuthenticationProviderImpl.java
package examples.security.providers.authentication.simple; import java.util.HashMap; import javax.security.auth.login.AppConfigurationEntry; import javax.security.auth.login.AppConfigurationEntry.LoginModuleControlFlag; import weblogic.management.security.ProviderMBean; import weblogic.security.provider.PrincipalValidatorImpl; import weblogic.security.spi.AuthenticationProviderV2; import weblogic.security.spi.IdentityAsserterV2; import weblogic.security.spi.PrincipalValidator; import weblogic.security.spi.SecurityServices; import weblogic.security.principal.WLSGroupImpl; import weblogic.security.principal.WLSUserImpl; public final class SimpleSampleAuthenticationProviderImpl implements AuthenticationProviderV2 { private String description; private SimpleSampleAuthenticatorDatabase database; private LoginModuleControlFlag controlFlag; public void initialize(ProviderMBean mbean, SecurityServices services) { System.out.println("SimpleSampleAuthenticationProviderImpl.initialize"); SimpleSampleAuthenticatorMBean myMBean = (SimpleSampleAuthenticatorMBean)mbean; description = myMBean.getDescription() + "\n" + myMBean.getVersion(); database = new SimpleSampleAuthenticatorDatabase(myMBean); String flag = myMBean.getControlFlag(); if (flag.equalsIgnoreCase("REQUIRED")) { controlFlag = LoginModuleControlFlag.REQUIRED; } else if (flag.equalsIgnoreCase("OPTIONAL")) { controlFlag = LoginModuleControlFlag.OPTIONAL; } else if (flag.equalsIgnoreCase("REQUISITE")) { controlFlag = LoginModuleControlFlag.REQUISITE; } else if (flag.equalsIgnoreCase("SUFFICIENT")) { controlFlag = LoginModuleControlFlag.SUFFICIENT; } else { throw new IllegalArgumentException("invalid flag value" + flag); } } public String getDescription() { return description; } public void shutdown() { System.out.println("SimpleSampleAuthenticationProviderImpl.shutdown"); } private AppConfigurationEntry getConfiguration(HashMap options) { options.put("database", database); return new AppConfigurationEntry( "examples.security.providers.authentication.Simple.Simple.SampleLoginModuleImpl", controlFlag, options ); } public AppConfigurationEntry getLoginModuleConfiguration() { HashMap options = new HashMap(); return getConfiguration(options); } public AppConfigurationEntry getAssertionModuleConfiguration() { HashMap options = new HashMap(); options.put("IdentityAssertion","true"); return getConfiguration(options); } public PrincipalValidator getPrincipalValidator() { return new PrincipalValidatorImpl(); } public IdentityAsserterV2 getIdentityAsserter() { return null; } }
Example 4-2 shows the SampleLoginModuleImpl.java
class, which is one of two runtime classes for the sample Authentication provider. This runtime class implements the JAAS LoginModule interface (as described in Implement the JAAS LoginModule Interface), and therefore includes implementations for its initialize
, login
, commit
, abort
, and logout
methods.
Note:
The bold face code in Example 4-2 highlights the class declaration and the method signatures.Example 4-2 SimpleSampleLoginModuleImpl.java
package examples.security.providers.authentication.simple; import java.io.IOException; import java.util.Enumeration; import java.util.Map; import java.util.Vector; import javax.security.auth.Subject; import javax.security.auth.callback.Callback; import javax.security.auth.callback.CallbackHandler; import javax.security.auth.callback.NameCallback; import javax.security.auth.callback.PasswordCallback; import javax.security.auth.callback.UnsupportedCallbackException; import javax.security.auth.login.LoginException; import javax.security.auth.login.FailedLoginException; import javax.security.auth.spi.LoginModule; import weblogic.management.utils.NotFoundException; import weblogic.security.spi.WLSGroup; import weblogic.security.spi.WLSUser; import weblogic.security.principal.WLSGroupImpl; import weblogic.security.principal.WLSUserImpl; final public class SimpleSampleLoginModuleImpl implements LoginModule { private Subject subject; private CallbackHandler callbackHandler; private SimpleSampleAuthenticatorDatabase database; // Determine whether this is a login or assert identity private boolean isIdentityAssertion; // Authentication status private boolean loginSucceeded; private boolean principalsInSubject; private Vector principalsForSubject = new Vector(); public void initialize(Subject subject, CallbackHandler callbackHandler, Map sharedState, Map options) { // only called (once!) after the constructor and before login System.out.println("SimpleSampleLoginModuleImpl.initialize"); this.subject = subject; this.callbackHandler = callbackHandler; // Check for Identity Assertion option isIdentityAssertion = "true".equalsIgnoreCase((String)options.get("IdentityAssertion")); database = (SimpleSampleAuthenticatorDatabase)options.get("database"); } public boolean login() throws LoginException { // only called (once!) after initialize System.out.println("SimpleSampleLoginModuleImpl.login"); // loginSucceeded should be false // principalsInSubject should be false Callback[] callbacks = getCallbacks(); String userName = getUserName(callbacks); if (userName.length() > 0) { if (!database.userExists(userName)) { throwFailedLoginException("Authentication Failed: User " + userName + " doesn't exist."); } if (!isIdentityAssertion) { String passwordWant = null; try { passwordWant = database.getUserPassword(userName); } catch (NotFoundException shouldNotHappen) {} String passwordHave = getPasswordHave(userName, callbacks); if (passwordWant == null || !passwordWant.equals(passwordHave)) { throwFailedLoginException( "Authentication Failed: User " + userName + " bad password." ); } } } else { // anonymous login - let it through? System.out.println("\tempty userName"); } loginSucceeded = true; principalsForSubject.add(new WLSUserImpl(userName)); addGroupsForSubject(userName); return loginSucceeded; } public boolean commit() throws LoginException { // only called (once!) after login // loginSucceeded should be true or false // principalsInSubject should be false // user should be null if !loginSucceeded, null or not-null otherwise // group should be null if user == null, null or not-null otherwise System.out.println("SimpleSampleLoginModule.commit"); if (loginSucceeded) { subject.getPrincipals().addAll(principalsForSubject); principalsInSubject = true; return true; } else { return false; } } public boolean abort() throws LoginException { // The abort method is called to abort the authentication process. This is // phase 2 of authentication when phase 1 fails. It is called if the // LoginContext's overall authentication failed. // loginSucceeded should be true or false // user should be null if !loginSucceeded, otherwise null or not-null // group should be null if user == null, otherwise null or not-null // principalsInSubject should be false if user is null, otherwise true // or false System.out.println("SimpleSampleLoginModule.abort"); if (principalsInSubject) { subject.getPrincipals().removeAll(principalsForSubject); principalsInSubject = false; } return true; } public boolean logout() throws LoginException { // should never be called System.out.println("SimpleSampleLoginModule.logout"); return true; } private void throwLoginException(String msg) throws LoginException { System.out.println("Throwing LoginException(" + msg + ")"); throw new LoginException(msg); } private void throwFailedLoginException(String msg) throws FailedLoginException { System.out.println("Throwing FailedLoginException(" + msg + ")"); throw new FailedLoginException(msg); } private Callback[] getCallbacks() throws LoginException { if (callbackHandler == null) { throwLoginException("No CallbackHandler Specified"); } if (database == null) { throwLoginException("database not specified"); } Callback[] callbacks; if (isIdentityAssertion) { callbacks = new Callback[1]; } else { callbacks = new Callback[2]; callbacks[1] = new PasswordCallback("password: ",false); } callbacks[0] = new NameCallback("username: "); try { callbackHandler.handle(callbacks); } catch (IOException e) { throw new LoginException(e.toString()); } catch (UnsupportedCallbackException e) { throwLoginException(e.toString() + " " + e.getCallback().toString()); } return callbacks; } private String getUserName(Callback[] callbacks) throws LoginException { String userName = ((NameCallback)callbacks[0]).getName(); if (userName == null) { throwLoginException("Username not supplied."); } System.out.println("\tuserName\t= " + userName); return userName; } private void addGroupsForSubject(String userName) { for (Enumeration e = database.getUserGroups(userName); e.hasMoreElements();) { String groupName = (String)e.nextElement(); System.out.println("\tgroupName\t= " + groupName); principalsForSubject.add(new WLSGroupImpl(groupName)); } } private String getPasswordHave(String userName, Callback[] callbacks) throws LoginException { PasswordCallback passwordCallback = (PasswordCallback)callbacks[1]; char[] password = passwordCallback.getPassword(); passwordCallback.clearPassword(); if (password == null || password.length < 1) { throwLoginException("Authentication Failed: User " + userName + ". Password not supplied"); } String passwd = new String(password); System.out.println("\tpasswordHave\t= " + passwd); return passwd; } }
Before you start generating an MBean type for your custom security provider, you should first:
Understand the Basic Elements of an MBean Definition File (MDF)
Understand the SSPI MBean Hierarchy and How It Affects the Administration Console
When you understand this information and have made your design decisions, create the MBean type for your custom Authentication provider by following these steps:
Use the WebLogic MBeanMaker to Create the MBean JAR File (MJF)
Install the MBean Type Into the WebLogic Server Environment
Note:
Several sample security providers (available athttps://codesamples.samplecode.oracle.com/servlets/tracking?id=S224
on the Oracle Technology Network Web site) illustrate how to perform these steps.
All instructions provided in this section assume that you are working in a Windows environment.
To create an MBean Definition File (MDF), follow these steps:
Copy the MDF for the sample Authentication provider to a text file.
Note:
The MDF for the sample Authentication provider is calledSimpleSampleAuthenticator.xml
.Modify the content of the <MBeanType>
and <MBeanAttribute>
elements in your MDF so that they are appropriate for your custom Authentication provider.
Add any custom attributes and operations (that is, additional <MBeanAttribute>
and <MBeanOperation>
elements) to your MDF.
Save the file.
Note:
A complete reference of MDF element syntax is available in Appendix A, "MBean Definition File (MDF) Element Syntax."Once you create your MDF, you are ready to run it through the WebLogic MBeanMaker. The WebLogic MBeanMaker is currently a command-line utility that takes as its input an MDF, and outputs some intermediate Java files, including an MBean interface, an MBean implementation, and an associated MBean information file. Together, these intermediate files form the MBean type for your custom security provider.
The instructions for generating an MBean type differ based on the design of your custom Authentication provider. Follow the instructions that are appropriate to your situation:
If the MDF for your custom Authentication provider does not implement any optional SSPI MBeans and does not include any custom operations, follow these steps:
Create a new DOS shell.
Type the following command:
java -DMDF=xmlfile -Dfiles=filesdir -DcreateStubs=true weblogic.management.commo.WebLogicMBeanMaker
where the -DMDF
flag indicates that the WebLogic MBeanMaker should translate the MDF into code, xmlFile is the MDF (the XML MBean Description File) and filesdir is the location where the WebLogic MBeanMaker will place the intermediate files for the MBean type.
Whenever xmlfile is provided, a new set of output files is generated.
Each time you use the -DcreateStubs=true
flag, it overwrites any existing MBean implementation file.
Note:
As of version 9.0 of WebLogic Server, you can also provide a directory that contains multiple MDF's by using the -DMDFDIR <MDF directory name> option. In prior versions of WebLogic Server, the WebLogic MBeanMaker processed only one MDF at a time. Therefore, you had to repeat this process if you had multiple MDFs (in other words, multiple Authentication providers).Proceed to Use the WebLogic MBeanMaker to Create the MBean JAR File (MJF).
If the MDF for your custom Authentication provider does implement some optional SSPI MBeans or does include custom operations, consider the following:
Are you creating an MBean type for the first time? If so, follow these steps:
Create a new DOS shell.
Type the following command:
java -DMDF=xmlfile -Dfiles=filesdir -DcreateStubs=true weblogic.management.commo.WebLogicMBeanMaker
where the -DMDF
flag indicates that the WebLogic MBeanMaker should translate the MDF into code, xmlFile is the MDF (the XML MBean Description File) and filesdir is the location where the WebLogic MBeanMaker will place the intermediate files for the MBean type.
Whenever xmlfile is provided, a new set of output files is generated.
Each time you use the -DcreateStubs=true
flag, it overwrites any existing MBean implementation file.
Note:
As of version 9.0 of WebLogic Server, you can also provide a directory that contains multiple MDF's by using the -DMDFDIR <MDF directory name> option. In prior versions of WebLogic Server, the WebLogic MBeanMaker processed only one MDF at a time. Therefore, you had to repeat this process if you had multiple MDFs (in other words, multiple Authentication providers).If you implemented optional SSPI MBeans in your MDF, follow these steps:
Locate the MBean implementation file.
The MBean implementation file generated by the WebLogic MBeanMaker is named MBeanNameImpl.java
. For example, for the MDF named SampleAuthenticator
, the MBean implementation file to be edited is named SampleAuthenticatorImpl.java
.
For each optional SSPI MBean that you implemented in your MDF, implement each method. Be sure to also provide implementations for any methods that the optional SSPI MBean inherits.
If you included any custom attributes/operations in your MDF, implement the methods using the method stubs.
Save the file.
Proceed to Use the WebLogic MBeanMaker to Create the MBean JAR File (MJF).
Are you updating an existing MBean type? If so, follow these steps:
Copy your existing MBean implementation file to a temporary directory so that your current method implementations are not overwritten by the WebLogic MBeanMaker.
Create a new DOS shell.
Type the following command:
java -DMDF=xmlfile -Dfiles=filesdir -DcreateStubs=true weblogic.management.commo.WebLogicMBeanMaker
where the -DMDF
flag indicates that the WebLogic MBeanMaker should translate the MDF into code, xmlFile is the MDF (the XML MBean Description File) and filesdir is the location where the WebLogic MBeanMaker will place the intermediate files for the MBean type.
Whenever xmlfile is provided, a new set of output files is generated.
Each time you use the -DcreateStubs=true
flag, it overwrites any existing MBean implementation file.
Note:
As of version 9.0 of WebLogic Server, you can also provide a directory that contains multiple MDF's by using the -DMDFDIR <MDF directory name> option. In prior versions of WebLogic Server, the WebLogic MBeanMaker processed only one MDF at a time. Therefore, you had to repeat this process if you had multiple MDFs (in other words, multiple Authentication providers).If you implemented optional SSPI MBeans in your MDF, follow these steps:
Locate and open the MBean implementation file.
The MBean implementation file generated by the WebLogic MBeanMaker is named <MBeanName>Impl.java
. For example, for the MDF named SampleAuthenticator
, the MBean implementation file to be edited is named SampleAuthenticatorImpl.java
.
Open your existing MBean implementation file (which you saved to a temporary directory in step 1).
Synchronize the existing MBean implementation file with the MBean implementation file generated by the WebLogic MBeanMaker.
Accomplishing this task may include, but is not limited to: copying the method implementations from your existing MBean implementation file into the newly-generated MBean implementation file (or, alternatively, adding the new methods from the newly-generated MBean implementation file to your existing MBean implementation file), and verifying that any changes to method signatures are reflected in the version of the MBean implementation file that you are going to use (for methods that exist in both MBean implementation files).
If you modified the MDF to implement optional SSPI MBeans that were not in the original MDF, implement each method. Be sure to also provide implementations for any methods that the optional SSPI MBean inherits.
If you modified the MDF to include any custom operations that were not in the original MDF, implement the methods using the method stubs.
Save the version of the MBean implementation file that is complete (that is, has all methods implemented).
Copy this MBean implementation file into the directory where the WebLogic MBeanMaker placed the intermediate files for the MBean type. You specified this as filesdir in step 3. (You will be overriding the MBean implementation file generated by the WebLogic MBeanMaker as a result of step 3.)
Proceed to Use the WebLogic MBeanMaker to Create the MBean JAR File (MJF).
The MBean interface file is the client-side API to the MBean that your runtime class or your MBean implementation will use to obtain configuration data. It is typically used in the initialize method as described in Understand the Purpose of the "Provider" SSPIs.
Because the WebLogic MBeanMaker generates MBean types from the MDF you created, the generated MBean interface file will have the name of the MDF, plus the text "MBean" appended to it. For example, the result of running the SimpleSampleAuthenticator
MDF through the WebLogic MBeanMaker will yield an MBean interface file called SimpleSampleAuthenticatorMBean.java
.
Once your have run your MDF through the WebLogic MBeanMaker to generate your intermediate files, and you have edited the MBean implementation file to supply implementations for the appropriate methods within it, you need to package the MBean files and the runtime classes for the custom Authentication provider into an MBean JAR File (MJF). The WebLogic MBeanMaker also automates this process.
To create an MJF for your custom Authentication provider, follow these steps:
Create a new DOS shell.
Type the following command:
java -DMJF=jarfile -Dfiles=filesdir weblogic.management.commo.WebLogicMBeanMaker
where the -DMJF
flag indicates that the WebLogic MBeanMaker should build a JAR file containing the new MBean types, jarfile is the name for the MJF and filesdir is the location where the WebLogic MBeanMaker looks for the files to JAR into the MJF.
Compilation occurs at this point, so errors are possible. If jarfile is provided, and no errors occur, an MJF is created with the specified name.
Note:
When you create a JAR file for a custom security provider, a set of XML binding classes and a schema are also generated. You can choose a namespace to associate with that schema. Doing so avoids the possibility that your custom classes will conflict with those provided by Oracle. The default for the namespace is vendor. You can change this default by passing the -targetNameSpace argument to the WebLogicMBeanMaker or the associated WLMBeanMaker ant task.If you want to update an existing MJF, simply delete the MJF and regenerate it. The WebLogic MBeanMaker also has a -DIncludeSource option, which controls whether source files are included into the resulting MJF. Source files include both the generated source and the MDF itself. The default is false. This option is ignored when -DMJF is not used.
The resulting MJF can be installed into your WebLogic Server environment, or distributed to your customers for installation into their WebLogic Server environments.
To install an MBean type into the WebLogic Server environment, copy the MJF into the WL_HOME\server\lib\mbeantypes
directory, where WL_HOME is the top-level installation directory for WebLogic Server. This "deploys" your custom Authentication provider—that is, it makes the custom Authentication provider manageable from the WebLogic Server Administration Console.
Note:
WL_HOME\server\lib\mbeantypes
is the default directory for installing MBean types. (Beginning with 9.0, security providers can be loaded from ...\domaindir\lib\mbeantypes
as well.) However, if you want WebLogic Server to look for MBean types in additional directories, use the -Dweblogic.alternateTypesDirectory=<dir>
command-line flag when starting your server, where <dir> is a comma-separated list of directory names. When you use this flag, WebLogic Server will always load MBean types from WL_HOME\server\lib\mbeantypes
first, then will look in the additional directories and load all valid archives present in those directories (regardless of their extension). For example, if -Dweblogic.alternateTypesDirectory = dirX,dirY,
WebLogic Server will first load MBean types from WL_HOME\server\lib\mbeantypes
, then any valid archives present in dirX and dirY. If you instruct WebLogic Server to look in additional directories for MBean types and are using the Java Security Manager, you must also update the weblogic.policy file to grant appropriate permissions for the MBean type (and thus, the custom security provider). For more information, see "Using Java Security to Protect WebLogic Resources" in Programming Security for Oracle WebLogic Server.You can create instances of the MBean type by configuring your custom Authentication provider (see Configure the Custom Authentication Provider Using the Administration Console), and then use those MBean instances from a GUI, from other Java code, or from APIs. For example, you can use the WebLogic Server Administration Console to get and set attributes and invoke operations, or you can develop other Java objects that instantiate MBeans and automatically respond to information that the MBeans supply. We recommend that you back up these MBean instances.
Configuring a custom Authentication provider means that you are adding the custom Authentication provider to your security realm, where it can be accessed by applications requiring authentication services.
Configuring custom security providers is an administrative task, but it is a task that may also be performed by developers of custom security providers. This section contains information that is important for the person configuring your custom Authentication providers:
Specifying the Order of Authentication Providers
Note:
The steps for configuring a custom Authentication provider using the WebLogic Server Administration Console are described in "Configuring WebLogic Security Providers" in Securing Oracle WebLogic Server.As part of using a custom Authentication provider, you need to consider how you will configure and manage user lockouts. You have two choices for doing this:
The WebLogic Security Framework provides a realm-wide User Lockout Manager that works directly with the WebLogic Security Framework to manage user lockouts.
Note:
Both the realm-wide User Lockout Manager and a WebLogic Server 6.1 PasswordPolicyMBean (at the Realm Adapter level) may be active. For more information, see the WebLogic Server API Reference Javadoc.If you decide to rely on the realm-wide User Lockout Manager, then all you must do to make it work with your custom Authentication provider is use the WebLogic Server Administration Console to:
Ensure that User Lockout is enabled. (It should be enabled by default.)
Modify any parameters for User Lockout (as necessary).
Note:
Changes to the User Lockout Manager do not take effect until you reboot the server. Instructions for using the Administration Console to perform these tasks are described in "Protecting User Accounts" in Securing Oracle WebLogic Server.If you decide to implement your own User Lockout Manager as part of your custom Authentication provider, then you must:
Disable the realm-wide User Lockout Manager to prevent double lockouts from occurring. (When you create a new security realm using the WebLogic Server Administration Console, a User Lockout Manager is always created.) Instructions for performing this task are provided in "Protecting User Accounts" in Securing Oracle WebLogic Server.
Because you cannot borrow anything from the WebLogic Security Framework's realm-wide implementation, you must also perform the following tasks:
Provide the implementation for your User Lockout Manager. Note that there is no security service provider interface (SSPI) provided for User Lockout Managers.
Modify an MBean by which the User Lockout Manager can be managed.
If you plan to manage your User Lockout Manager from the console, incorporate the User Lockout Manager into the Administration Console using console extensions. For more information, see Extending the Administration Console for Oracle WebLogic Server.
As described in LoginModules and Multipart Authentication, the order in which you configure multiple Authentication providers (and thus LoginModules) affects the outcome of the authentication process.
You can configure Authentication providers in any order. However, if you need to reorder your configured Authentication providers, follow the steps described in "Changing the Order of Authentication Providers" in Securing Oracle WebLogic Server.