The Updating Firmware icon indicates that the downloaded firmware is being updated on the Sun Ray Client. The following messages are also displayed:
Erasing flash. DO NOT POWER OFF!
Programming flash. DO NOT POWER OFF!
The Sun Ray Client reboots after updating the firmware.
Do not interrupt the firmware update. Interrupting the firmware update may make the Sun Ray Client unusable.
If there is an additional firmware update for the internal smart
card controller, the Updating Firmware icon is displayed again
and the smart card LED flashes while the update occurs. The
following message is also displayed: Programming Smart
Card Controller. DO NOT POWER OFF!
. The Sun Ray Client
reboots after updating the firmware for the internal smart card
controller.