System Messages: CMDTUX Catalog 6900-6999
|
6900 |
ERROR: MINENCRYPTBITS parameter must be 0, 40, 56, 128, or 256 | |
|
Description |
The MINENCRYPTBITS configured in the NETWORK section is not valid. The valid value must be 0, 40, 56, 128, or 256. |
Action |
Correct the MINENCRYPTBITS value configured in the UBBCONFIG. | |
See Also |
| |
6901 |
ERROR: MAXENCRYPTBITS parameter must be 0, 40, 56, 128, or 256 | |
|
Description |
The MINENCRYPTBITS configured in the NETWORK section is not valid. The valid value must be 0, 40, 56, 128, or 256. |
Action |
Correct the MAXENCRYPTBITS value configured in the UBBCONFIG. | |
See Also |
| |
6902 |
Invalid value | |
|
Description |
An invalid or out of range value for SSL RENEGOTIATION is configured. |
Action |
Use the correct value for SSL RENEGOTIATION. | |
6903 |
ERROR: SSL_RENEGOTIATION parameter must be >= 0 and <= 2147483647 | |
|
Description |
The configured SSL_RENEGOTIATION value is not valid. The valid value must be greater or equal to 0, and less tn han or equal to 2147483647. |
Action |
Use the legal value for SSL_RENEGOTIATION in the UBBCONFIG. | |
6904 |
ERROR: -z(val) must be 0, 40, 56, 128, or 256 | |
|
Description |
The '-z' command line option for tlisten is for MINENCRYPTBITS, and its value must be 0, 40, 56, 128, or 256. The ' |
Action |
Use the supported '-z' command line options value. | |
6905 |
ERROR: -Z(val) must be 0, 40, 56, 128, or 256 | |
|
Description |
The '-Z' command line option for tlisten is for MAXENCRYPTBITS, and its legal values are 0, 40, 56, 128, or 256 bits. The ' |
Action |
Use the supported '-Z' command line options value. | |
6906 |
ERROR: -s option cannot be specified without -c option | |
|
Description |
The -s option indicates ' |
Action |
Specify -s, -n, and -c option all together. | |
See Also |
| |
6907 |
ERROR: -c option cannot be specified without -s option | |
|
Description |
The '-c' option is for private key location. It can only be used when ' |
Action |
Correct the command line option to tell | |
6908 |
usage: tlisten -l nlsaddr [-d dev] [ -u {uid-# | uid-name}] [-z {0|40|56|128|256}] [-Z {0|40|56|128|256}] [-s] [-n sec_principal_name] [-c sec_principal_location] [-p sec_principal_passvar] | |
|
Description |
This is the command line usage information for ' |
Action |
Informational, no action required. | |
6909 |
WARN: -c sec_principal_location cannot b specified without -n sec_principal_name; ignoring -c option | |
|
Description |
The -c option is given without -n option. The principal's private key location option has to be combined with sec_principal_name to be valid. This private key location value will be ignored. |
Action |
No action required if not running with SSL; however, if SSL is required then '-n' option for security principal name also has to be given. | |
6910 |
WARN: -p sec_principal_passvar cannot be specified without -n sec_principal_name; ignoring -p option | |
|
Description |
The password for private key option, '-p', is given without specifying the principal name. It is ignored. |
Action |
No action required if not running with SSL; however, if SSL is required then '-n' option for security principal name also has to be given. | |
6912 |
Enter password for usrname: | |
|
Description |
Prompt to ask user to enter password for user usrname. |
Action |
Enter the password for the private key for user 'usrname'. | |
6913 |
ERROR: Cannot get password for usrname | |
|
Description |
Can not get password from user for 'usrname' from prompt. |
Action |
Enter the correct password when prompted. | |
6914 |
Re-enter password for usrname | |
|
Description |
Prompt for asking user to re-enter password for private key. |
Action |
Enter the correct password when prompted. | |
6915 |
ERROR: Cannot get password for usrname | |
|
Description |
Can not get password from user for 'usrname' from prompt. |
Action |
Enter the correct password when prompted. | |
6916 |
WARN: The entered password do not match, Try again. | |
|
Description |
The entered passwords do not matchj. The user has one more chane to correct the problem. |
Action |
Enter the correct password when prompted. | |
6917 |
ERROR: Too many passoword failure for usrname | |
|
Description |
There are too many failure while trying to get password from user. |
Action |
Enter the correct password next time starting | |
6918 |
ERROR: Memory allocation failure | |
|
Description |
An attempt to allocate memory dynamically from the operating system using |
Action |
Make sure the operation system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also increate the space on the swap device. | |
See Also |
See the For UNIX system, see the For Microsoft Windows systems, see the Microsoft Visuall C++ online help. | |
6919 |
ERROR: Error initializing SSL certificate or private key | |
|
Description |
The |
Action |
Check ULOG for more exact reason of failure. Then check the PKI plug-in configuration, compare it with the SSL configuration of tlisten to find out whether the error are configuration related. If problem persist, contact your Certificate Authority or Oracle Customer support. | |
6920 |
ERROR: LMS Q to be initialized is NULL | |
|
Description |
The |
Action |
Contact Oracle Customer Support. | |
6921 |
ERROR: LMS memory allocation failed | |
|
Description |
An attempt to allocate memory dynamically from the operating system using |
Action |
Make sure the operation system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also increate the space on the swap device. | |
See Also |
See the For UNIX system, see the For Microsoft Windows systems, see the Microsoft Visuall C++ online help. | |
6922 |
ERROR: LMS Queue lock failed | |
|
Description |
An attempt to lock the mutex of |
Action |
Check system resource tunables. If problem persists, contact Oracle Customer Support with information about your environment. | |
6923 |
ERROR: Cannot create LMS server thread | |
|
Description |
|
Action |
Check system resource tunables. If problem persists, contact Oracle Customer Support. | |
6924 |
ERROR: -n option argument length is greater than maxlen | |
|
Description |
The length of the tlisten -n option is greater than maxlen bytes. (The -n option is used to specify the security principal name when running tlisten using the SSL protocol.) |
Action |
Fix the tlisten -n option argument so that it does not exceed maxlen bytes. | |
6925 |
ERROR: -c option argument length is greater than maxlen | |
|
Description |
The length of the tlisten -c option is greater than maxlen bytes. (The -c option is used to specify the security principal location when running tlisten using the SSL protocol.) |
Action |
Fix the tlisten -c option argument so that it does not exceed maxlen bytes. | |
6926 |
ERROR: -p option argument length is greater than maxlen | |
|
Description |
The length of the tlisten -p option is greater than maxlen bytes. (The -p option is used to specify the security principal password variable when running tlisten using the SSL protocol.) |
Action |
Fix the tlisten -p option argument so that it does not exceed maxlen bytes. | |
6927 |
ERROR: Invalid tlisten option option | |
|
Description |
The tlisten command was invoked with an invalid option option. |
Action |
Refer to the Usage message printed after this message or to the tlisten(1) manual page for a list of valid tlisten options. Fix the tlisten command line so that only valid options are specified. | |
6928 |
ERROR: Memory allocation failed for XML buffer | |
|
Description |
|
Action |
Make sure the operation system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also increate the space on the swap device. | |
See Also |
See the For UNIX system, see the For Microsoft Windows systems, see the Microsoft Visuall C++ online help. | |
6929 |
ERROR: Memory allocation failed for reply message to console | |
|
Description |
|
Action |
Make sure the operation system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also increate the space on the swap device. | |
See Also |
See the For UNIX system, see the For Microsoft Windows systems, see the Microsoft Visuall C++ online help. | |
6930 |
ERROR: Memory allocation failed for tppost event buffer | |
|
Description |
|
See Also |
See the For UNIX system, see the For Microsoft Windows systems, see the Microsoft Visuall C++ online help. | |
6931 |
ERROR :LMS failed to create a new connection for console | |
|
Description |
|
Action |
Contact Oracle Customer Support. | |
6932 |
ERROR :LMS failed to connect to TSAM Manager URL | |
|
Description |
|
Action |
Make sure TSAM Manager is started and runs normally. If firewall is deployed between | |
6933 |
ERROR: LMS failed to send data to TSAM Manager URL | |
|
Description |
|
Action |
Make sure TSAM Manager is started and runs normally. If problem persist, contact Oracle Customer Support. | |
6940 |
WARN: LMS server is currently unavailable | |
|
Description |
Cannot send request to |
Action |
Make sure LMS is configured in UBBCONFIG on local machine. If LMS is configured, check your monitoring policyto reduce the monitoring frequency.If problem persist, contact Oracle Customer Support. | |
6942 |
ERROR: machine machine doesn't suppport TSAM | |
|
Description |
LMS fail to do the TMMONITOR MIB request. |
Action |
None | |
6960 |
INFO: JVM Options[index]=value | |
|
Description |
Display used JVM options in sequence. |
Action |
None. | |
6961 |
INFO: Configuration file: <tpgauth, gaconfig.xml, gakey.dat> | |
|
Description |
Display filename of GAUTHSVR configurations (specified by '-f', '-o', '-k' respectively). |
Action |
None. | |
6962 |
ERROR: Fails to create JVM (rc=return code) | |
|
Description |
GAUTHSVR fails when tried to create JVM. |
Action |
Check JVM options (by enable '-v' option for GAUTHSVR) and environment setting for JVM used by GAUTHSVR. Some key environment variables are PATH (for Windows), LD_LIBRARY_PATH (Unix), etc. | |
6963 |
ERROR: Cannot load CSS (detail message=<JVM message>) | |
|
Description |
GAUTHSVR fails to load CSS, an underlying component. |
Action |
Contact Oracle Customer Support. | |
6964 |
ERROR: Cannot initialize CSS (detail message = <JVM message>) | |
|
Description |
GAUTHSVR fails to initialize CSS, an underlying component. |
Action |
Check the filename of configurations doesn't contains invalid characters. Otherwise contact Oracle Customer Support. | |
6965 |
ERROR: Incorrect CSS package (detail message = <JVM Message>) | |
|
Description |
GAUTHSVR encounters problem to communicate with CSS component. |
Action |
Contact Oracle Customer Support. | |
6966 |
ERROR: Shutdown error (detail message = <JVM Message>) | |
|
Description |
GAUTHSVR fails to shutdown CSS. |
Action |
Contact Oracle Customer Support. | |
6967 |
ERROR: Error occurred when authenticating user username (detail message = <JVM Message>) | |
|
Description |
The user security information is incorrect (either username not present in LDAP server or password is wrong). |
Action |
None. | |
6968 |
INFO: Configuration tpgauth is new | |
|
Description |
The configuration file tpgauth is new and GAUTHSVR will re-generate the other two configuration files. |
Action |
None. | |
6969 |
INFO: Configuration tpgauth has been modified | |
|
Description |
GAUTHSVR will update the generated two configuration files since this file has been changed. Please note that value for the item which is not present in the updated configuration file remains unchanged. |
Action |
None. | |
6970 |
INFO: Configuration tpgauth has not changed | |
|
Description |
GAUTHSVR will not update the generated configuration files since this file has not changed. |
Action |
None. | |
6971 |
ERROR: Invalid -t parameter, should be either 'user' or 'group' | |
|
Description |
Only 'user' or 'group' is valid as the parameter for -t option. |
Action |
Specify either 'user' or 'group' as the parameter for -t option. | |
6972 |
INFO: Translate user file tpusr with template tpusr-template | |
|
Description |
Processing prompt. |
Action |
None. | |
6973 |
INFO: Group file tpgrp, output file filename | |
|
Description |
Processing prompt. |
Action |
None. | |
6974 |
ERROR: Referenced field no. in template is too large | |
|
Description |
The value specified between '<%' or '<%g' and '>' to reference fields in tpusr or tpgrp is larger than 128. |
Action |
Correct the value in template file and try again. | |
6975 |
INFO: Translate group file tpgrp with template tpgrp-template | |
|
Description |
Processing prompt. |
Action |
None. | |
6976 |
ERROR: Cannot open template file filename | |
|
Description |
The file filename> is not available. |
Action |
Provide an existed filename as template. | |
6977 |
ERROR: Template file too large to load in memory | |
|
Description |
There is not enough memory to load the template file. |
Action |
Shrink the template file size or assign more memory resource to the process. | |
6978 |
ERROR: Cannot read template file filename | |
|
Description |
The file filename is not readable. |
Action |
Check the file permission to confirm it's readable by current user. | |
6979 |
ERROR: Template contains invalid field reference in line lineno | |
|
Description |
Field reference is not in valid format. The valid format should be a positive number enclosed by '<%' or '<%g' and '>'. |
Action |
Correct error in template file. | |
6980 |
ERROR: Group for group id gid does not exist in group file filename | |
|
Description |
There is a user belongs to a non-existing group id gid. |
Action |
Remove the user from tpusr or add a group into tpgrp with group id gid. | |
6981 |
WARN: User cache is full. New entries cannot be added | |
|
Description |
The user security information cannot be stored in cache since it's full. It has no impact on function of GAUTHSVR. |
Action |
Increase user cache size to a large value (UserCacheSize in GAUTHSVR configuration file) if there are many users in the application system. | |
6982 |
INFO: Cache[%d] user name %s, appkey 0x%x, ctime %ld | |
|
Description |
Display information stored in cache. |
Action |
None. | |
6983 |
ERROR: Configuration error (detail message = <JVM message>) | |
|
Description |
GAUTHSVR encountered error when processing configuration file. |
Action |
Contact Oracle Customer Support. | |
6984 |
ERROR: Invalid keyword value in line lineno of filename | |
|
Description |
GAUTHSVR found there was an unknown keyword value in configuration file filename. |
Action |
Correct error in configuration file. | |
6985 |
ERROR: Invalid line lineno in content. Format should be \"keyword=value\" | |
|
Description |
GAUTHSVR found configuration file error in line lineno with content content which was not in format of \"keyword=value\". |
Action |
Correct error in configuration file. | |
6986 |
ERROR: Error in reading encrypted password from TUXCONFIG file | |
|
Description |
This error occurred during boot of TUXEDO in MP mode while sending TUXCONFIG to older site. |
Action |
Contact Oracle Customer Support. | |
6987 |
ERROR: Error in re-encrypting password | |
|
Description |
The re-encrypt of system password using DES failed during boot of TUXEDO in MP mode while sending TUXCONFIG to older site. |
Action |
Contact Oracle Customer Support. | |
6988 |
ERROR: Error in generating one-way hash | |
|
Description |
Failure encountered while generating hash value for Application Password. |
Action |
Contact Oracle Customer Support. | |
6989 |
ERROR: MAXSERVICES parameter must be > 0 and < 1048575 | |
|
Description |
The configured MAXSERVICES value is not valid. |
Action |
User the valid MAXSERVICES value between 0 and 1048575. | |
6990 |
ERROR: Cannot boot old release site (site_name) when MAXSRCS is greater than 32766 | |
|
Description |
The before TUXEDO 10.0 release the MAXSERVICES is limited to 32766. When TUXEDO is running in a mixed releases MP mode environment with any of the slave node that is older than TUXEDO 10 release then MAXSERVICES is limited to 32766 for the whole TUXEDO Application domain. |
Action |
Either upgrade the older release node to TUXEDO 10.0 and above, or change the MAXSERVICES to value smaller than or equal to 32766. | |
6991 |
ERROR: LMS cannot initialize the serve thread context | |
|
Description |
|
Action |
Contact Oracle Customer Support. | |
6992 |
ERROR: Invalid value of heartbeat interval | |
|
Description |
An invalid "-t" option is specfied in CLOPT of |
Action |
The valid heartbeat interval is an integer of [1,60]. Make sure the correct option is set with "-t" option. | |
6993 |
ERROR: Invalid value of memory cache size option | |
|
Description |
An invalid "-x" option is specfied in CLOPT of |
Action |
The valid memory cache size is an integer of [1001,999999]. Make sure the correct option is set with "-x" option. | |
6994 |
ERROR: The console address is not specified or invalid | |
|
Description |
The "-l" option is not specified or invalid in CLOPT of |
Action |
| |
6995 |
ERROR: The network initialization failed | |
|
Description |
|
Action |
Contact Oracle Customer Support. | |
6996 |
WARN: LMS cannot update queue table entry | |
|
Description |
|
Action |
Contact Oracle Customer Support. | |
6997 |
ERROR: Invalid value of logging error interval | |
|
Description |
The "-e" option is specified with an invalid in CLOPT of |
Action |
The valid logging error interval is an integer of [1,65535]. Make sure the correct option is set with "-e" option. | |
6998 |
WARN: LMS has dropped dropped number messages and sent sent number messages | |
|
Description |
|
Action |
Increase | |
6999 |
ERROR: SSL encryption is configured for this configuration, but the SSL package is not installed | |
|
Description |
The SSL is configured but the SSL package is not installed with TUXEDO. |
Action |
Change configuration to use LLE or contact Oracle Customer Support for purchaing TUXEDO SSL package. |