System Messages: CMDGW Catalog 3600-3699

3601

ERROR: tpalloc failed

Description

Failed to allocate memory necessary for processing the administrative request.

Action

Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. If message persists, contact Oracle Customer Support with the exact error message.

3602

ERROR: Invalid class specified

Description

A request for an invalid class has been routed to the DMADM server.

Action

If using Admin API, check that the Domain Admin is not being called directly. Contact Oracle Customer Support with the exact error message.

3603

ERROR: x_SEL=<badhex> contains an invalid hex value

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The S/P/T_SEL parameter in the DM_OSITPX section contains an invalid hex value.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3609

ERROR: Failover remote domains domain1 and domain2 are not the same domain type for the DM_REMOTE_SERVICES entry service

Description

A DM_REMOTE_SERVICES entry service specified failover remote domain values in the DMCONFIG file. The failover domains listed, domain1 and domain2, were not of the same domain type (such as TDOMAIN, TOPEND, OSITP, etc.).

Action

Edit the DMCONFIG file and modify the service entry to only specify alternate RDOM values that are of the same type.

See Also

dmconfig(5)

3610

ERROR: Domain types differ for local domain ldom and remote domain rdom for the DM_REMOTE_SERVICES entry service

Description

A DM_REMOTE_SERVICES entry service specified an LDOM parameter and an RDOM parameter that are of different types. A domain gateway may only communicate with a remote domain of the same type (such as TDOMAIN, TOPEND, OSITP, etc.).

Action

Edit the DMCONFIG file and modify the service entry such that both LDOM and RDOM parameters have matching system types.

See Also

dmconfig(5)

3611

ERROR: TP_SYSTEM values differ for local domain ldom and remote domain rdom for the DM_REMOTE_SERVICES entry service

Description

The Oracle TOP END DM_REMOTE_SERVICES entry service has local domain ldom specified with a TP_SYSTEM value that does not match the TP_SYSTEM value for the remote domain rdom.

Action

Edit the DMCONFIG file and modify the service entry such that both LDOM and RDOM have matching TP_SYSTEM parameters.

See Also

dmconfig for GWTOPEND(5)

3612

ERROR: Failover remote domains domain1 and domain2 do not have matching TP_SYSTEM values for the DM_REMOTE_SERVICES entry service

Description

The Oracle TOP END DM_REMOTE_SERVICES entry service has multiple remote domains specified for the RDOM parameter. In such a failover configuration, all remote domains must have the same TP_SYSTEM value.

Action

Edit the DMCONFIG file and modify the service entry such that the RDOM values domain1 and domain2 have matching TP_SYSTEM parameters.

See Also

dmconfig for GWTOPEND(5)

3613

ERROR: memory allocation failure

Description

Failed to allocate memory necessary for processing the administrative request.

Action

Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. If message persists, contact Oracle Customer Support with the exact error message.

3614

ERROR: FML buffer inconsistency

Description

While processing a Domains MIB request an inconsistency was discovered in the FML buffer received from a GWADM adminstrative server.

Action

If the message persists, contact Oracle TUXEDO system technical Support with the exact error message.

3615

ERROR: internal table bad

Description

An internal inconsistency was detected in an internal table used for processing Domains MIB requests.

Action

Contact Oracle TUXEDO system technical Support with the exact error message.

3616

ERROR: unable to read request buffer

Description

An error has occurred reading an attribute from a GWADM message buffer while processing a Domains MIB request.

Action

If the message persists, contact Oracle TUXEDO system technical Support with the exact error message.

3617

ERROR: FML error (error message) mapping request to gwadm protocol

Description

An FML error identified in message error message has occurred while mapping a Domains MIB request to internal GWADM protocol.

Action

If the message persists, contact Oracle Customer Support with the exact error message.

3618

ERROR: FML error (error number) mapping request to gwadm protocol

Description

An FML error identified by error number has occurred while mapping a Domains MIB request to internal GWADM protocol.

Action

If the message persists, contact Oracle Customer Support with the exact error message.

3619

ERROR: Failed decoding GWADM reply (error message)

Description

The error identified in error message occurred while decoding the reply from GWADM for a Domains MIB request.

Action

Perform the recommended action for the error message. If the message persists, contact Oracle Customer Support.

3620

ERROR: unexpected error response from GWADM (error message)

Description

The unexpected error identified in error message was received from GWADM while processing a Domains MIB request.

Action

Perform the recommended action for the error message. If the message persists, contact Oracle Customer Support.

3621

ERROR: unrecognised error response (error number) from GWADM (error message)

Description

An unrecognised error response error number was received from GWADM. The error message error message gives additional information.

Action

Perform the recommended action for the error message. If the message persists, contact Oracle Customer Support.

3622

ERROR: unexpected error response from GWADM (error message)

Description

The unexpected error identified in error message was received from GWADM while processing a Domains MIB request.

Action

Perform the recommended action for the error message. If the message persists, contact Oracle Customer Support.

3623

ERROR: unexpected error response from GWADM (error message)

Description

The unexpected error identified in error message was received from GWADM while processing a Domains MIB request.

Action

Perform the recommended action for the error message. If the message persists, contact Oracle Customer Support.

3624

ERROR: call to GWADM failed tperrno(error number)

Description

While processing a Domains MIB request, and unexpected error response was received from an internal call to the GWADM adminstration server. The tperrno error number given in error number details the error that occurred.

Action

If the GWADM administration server is no longer running, restart it and repeat the request. Otherwise, if the message persists, contact Oracle Customer Support.

3625

ERROR: unexpected error response from GWADM (error message)

Description

The unexpected error identified in error message was received from GWADM while processing a Domains MIB request.

Action

Perform the recommended action for the error message. If the message persists, contact Oracle Customer Support.

3626

ERROR: unrecognised error response (error number) from GWADM (error message)

Description

An unrecognised error response error number was received from GWADM. The error message error message gives additional information.

Action

Perform the recommended action for the error message. If the message persists, contact Oracle Customer Support.

3627

ERROR: unexpected error response from GWADM (error message)

Description

The unexpected error identified in error message was received from GWADM while processing a Domains MIB request.

Action

Perform the recommended action for the error message. If the message persists, contact Oracle Customer Support.

3628

ERROR: unexpected error response from GWADM (error message)

Description

The unexpected error identified in error message was received from GWADM while processing a Domains MIB request.

Action

Perform the recommended action for the error message. If the message persists, contact Oracle Customer Support.

3629

ERROR: call to GWADM failed tperrno(error number)

Description

While processing a Domains MIB request, and unexpected error response was received from an internal call to the GWADM adminstration server. The tperrno error number given in error number details the error that occurred.

Action

If the GWADM administration server is no longer running, restart it and repeat the request. Otherwise, if the message persists, contact Oracle Customer Support.

3630

ERROR: attribute_name - must contain hex digits

Description

The attribute_name attribute was specified as a hexadecimal string (starting with 0x or \\\\x), but a non-hexadecimal character was encountered in the string.

Action

Enter hexadecimal characters in the attribute_name attribute and resubmit the request.

See Also

DMIB(5)

3631

ERROR: attribute_name - must contain an even number of hex digits

Description

The attribute attribute_name was specified as a hexadecimal strring (starting with 0x or \\\\x). This requires that there be an even number of characters following the prefix.

Action

Correct the value to have an even number of hexadecimal characters and resubmit the MIB request.

See Also

DMIB(5)

3632

ERROR: Cannot access $TUXCONFIG to validate T_DM_LOCAL class

Description

While processing a T_DM_LOCAL class MIB request, the TUXCONFIG file cannot be accessed to validate attributes of the MIB request.

Action

Check to make sure that the file exists and the directory structure is accessible. If the TUXCONFIG file does not exist, recreate it first before resubmitting the MIB request.

See Also

DMIB(5)

3633

ERROR: ACL_POLICY(val) can only be either LOCAL or GLOBAL

Description

While executing dmloadcf, the value for ACL_POLICY was not set to either LOCAL or GLOBAL.

Action

Correct the value for ACL_POLICY and re-execute the command.

See Also

dmconfig(5)

3635

ERROR: LOCAL_PRINCIPAL_NAME cannot be specified when ACL_POLICY is GLOBAL

Description

While executing dmloadcf, the value for ACL_POLICY was set to GLOBAL and a LOCAL_PRINCIPAL_NAME was specified. This is not allowed.

Action

Change the value for ACL_POLICY to LOCAL, or remove the LOCAL_PRINCIPAL_NAME and re-execute the command.

See Also

dmconfig(5)

3637

ERROR: memory allocation failure

Description

Failed to allocate memory necessary for processing the administrative request.

Action

Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. If message persists, contact Oracle Customer Support with the exact error message.

See Also

dmloadcf(1) and dmconfig(5)

3638

ERROR: XATMI_ENCODING can only be specified for REMOTE domain

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The XATMI_ENCODING parameter in the DM_OSITPX section is specified for the wrong type of domain. The XATMI_ENCODING parameter can only be specified for REMODE domains of type OSITPX.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3639

ERROR: Bad string value for XATMI_ENCODING, ignored

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The XATMI_ENCODING parameter in the DM_OSITPX section is an invalid value.

The parameter values for the XATMI_ENCODING in the OSITPX section must be CAE, PRELIMINARY, OLTP_TM2200, or NATIVE_A_SERIES. The default parameter is CAE.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3640

ERROR: Invalid XATMI_ENCODING(encoding_name) for domain(domain_name)

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The XATMI_ENCODING parameter in the DM_OSITPX section is an invalid value.

The parameter values for the XATMI_ENCODING in the OSITPX section must be CAE, PRELIMINARY, OLTP_TM2200, or NATIVE_A_SERIES. The default parameter is CAE.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3641

ERROR: Bad string value for NWADDR, failed parse

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The NWADDR parameter in the DM_OSITPX section has an invalid value.

Action

Correct the NWADDR entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3642

ERROR: Invalid NWADDR(nwaddr_string) for domain(ositpx_domain_name)

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The NWADDR parameter in the DM_OSITPX section is an invalid value.

Action

Correct the NWADDR entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3643

ERROR: Bad string value for P_SEL, failed parse

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The P_SEL parameter in the DM_OSITPX section has an invalid value.

Action

Correct the P_SEL entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3644

ERROR: Invalid P_SEL(psel) for domain(ositpx_domain_name)

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The P_SEL parameter in the DM_OSITPX section is an invalid value.

Action

Correct the P_SEL entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3645

ERROR: Bad string value for S_SEL, failed parse

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The S_SEL parameter in the DM_OSITPX section has an invalid value.

Action

Correct the S_SEL entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3646

ERROR: Invalid S_SEL(ssel) for domain(ositpx_domain_name)

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The S_SEL parameter in the DM_OSITPX section is an invalid value.

Action

Correct the S_SEL entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3647

ERROR: Bad string value for T_SEL, failed parse

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The T_SEL parameter in the DM_OSITPX section has an invalid value.

Action

Correct the T_SEL entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3648

ERROR: Invalid T_SEL(tsel) for domain(ositpx_domain_name)

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The T_SEL parameter in the DM_OSITPX section is an invalid value.

Action

Correct the T_SEL entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3649

ERROR: Bad string value for DNS_RESOLUTION, ignored

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The DNS_RESOLUTION parameter in the DM_OSITPX section has an invalid value.

Action

Correct the DNS_RESOLUTION entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3650

ERROR: Invalid DNS_RESOLUTION(dns_code) for domain(ositpx_domain_name)

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The DNS_RESOLUTION parameter in the DM_OSITPX section is an invalid value.

Action

Correct the DNS_RESOLUTION entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3651

ERROR: Bad domain type for MULTIPLEXING

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The MULTIPLEXING parameter in the DM_OSITPX section is specified for the wrong type of domain. The MULTIPLEXING parameter can only be specified for REMOTE domains of type OSITPX.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3652

ERROR: MULTIPLEXING can only be specified for REMOTE domain

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The MULTIPLEXING parameter in the DM_OSITPX section is specified for the wrong type of domain. The MULTIPLEXING parameter can only be specified for REMOTE domains of type OSITPX.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3653

ERROR: Invalid numeric value range

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The MULTIPLEXING parameter in the DM_OSITPX section is specified with an invalid value.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3654

ERROR: Value of MULTIPLEXING must be = 0

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The MULTIPLEXING parameter in the DM_OSITPX section must have zero as its only valid value.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3655

ERROR: Bad domain type for MINENCRYPTBITS

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The MINENCRYPTBITS parameter in the DM_OSITPX section is specified for the wrong type of domain. The MINENCRYPTBITS parameter can only be specified for REMOTE domains of type OSITPX.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3656

ERROR: MINENCRYPTBITS can only be specified for REMOTE domain

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The MINENCRYPTBITS parameter in the DM_OSITPX section is specified for the wrong type of domain. The MINENCRYPTBITS parameter can only be specified for REMOTE domains of type OSITPX.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3657

ERROR: Bad domain type for MAXENCRYPTBITS

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The MAXENCRYPTBITS parameter in the DM_OSITPX section is specified for the wrong type of domain. The MAXENCRYPTBITS parameter can only be specified for REMOTE domains of type OSITPX.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3658

ERROR: MAXENCRYPTBITS can only be specified for REMOTE domain

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The MAXENCRYPTBITS parameter in the DM_OSITPX section is specified for the wrong type of domain. The MAXENCRYPTBITS parameter can only be specified for REMOTE domains of type OSITPX.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3659

ERROR: Bad domain type for OPTIONS

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The OPTIONS parameter in the DM_OSITPX section is specified for the wrong type of domain. The OPTIONS parameter can only be specified for REMOTE domains of type OSITPX.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3660

ERROR: OPTIONS can only be specified for REMOTE domain

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The OPTIONS parameter in the DM_OSITPX section is specified for the wrong type of domain. The OPTIONS parameter can only be specified for REMOTE domains of type OSITPX.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3661

ERROR: Bad string value for OPTIONS, ignored

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The OPTIONS parameter in the DM_OSITPX section contains an invalid value.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3662

ERROR: Invalid OPTIONS(opt_value) for domain(ositpx_domain_name)

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The OPTIONS parameter in the DM_OSITPX section contains an invalid parameter string.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3663

ERROR: Invalid value

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The COUPLING parameter in the DM_EXPORT section is an invalid value.

The parameter values for the COUPLING are either TIGHT or LOOSE.

Action

Correct this entry in the DM_EXPORT section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3664

ERROR: Unknown COUPLING type <val>. Only TIGHT or LOOSE are recognized

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The COUPLING parameter in the DM_EXPORT section contains an invalid value.

Action

Correct this entry in the DM_IMPORT section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3665

ERROR: Invalid value

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The AUTOPREPARE parameter in the DM_IMPORT section is an invalid value.

The parameter values for the AUTOPREPARE are either Y or N.

Action

Correct this entry in the DM_IMPORT section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3666

ERROR: AUTOPREPARE(value) can only be either Y or N

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The AUTOPREPARE parameter in the DM_IMPORT section contains an invalid value.

Action

Correct this entry in the DM_IMPORT section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3667

ERROR: Invalid string value

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The NWADDR parameter in the DM_OSITPX section contains an invalid value.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3668

ERROR: NWADDR=<nsap> contains an invalid format (IC = indicator_code)

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The NWADDR parameter in the DM_OSITPX section contains an invalid value. Refer to the returned indicator_code to correct the format of the NWADDR.

1 = a comma was seen and the expected network type was invalid.

2 = the dotted IP address could not be parsed. It must be in the format a.a.a.a

3 = IP port number is out of range. 1 <= port number <= 65535

4 = The IP address value is out of range, format a.a.a.a where 1 <= a <= 255

5 = The IP port number could not be parsed.

6 = CONS, CLNS address size is too large.

7 = CONS, CLNS invalid hex value

8 = Invalid network type. Must be IP, CONS, or CLNS

9 = Maximum number of NSAP values reached.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3669

ERROR: Invalid string value

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The S/P/T_SEL parameter in the DM_OSITPX section is specified with an invalid value.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3670

ERROR: x_SEL=<badhex> contains an invalid hex value

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The S/P/T_SEL parameter in the DM_OSITPX section contains an invalid hex value.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3671

ERROR: Invalid value

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The TPSUT_TYPE parameter in the DM_IMPORT section is an invalid value.

The parameter values for the TPSUT_TYPE are either NotSupplied or INTEGER or PrintableString.

Action

Correct this entry in the DM_IMPORT section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3672

ERROR: Unknown TPSUT_TYPE type <Type>. Must be: NotSupplied, INTEGER or PRINTABLESTRING

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The TPSUT_TYPE parameter in the DM_IMPORT section is an invalid value.

The parameter values for the TPSUT_TYPE are either NotSupplied or INTEGER or PrintableString.

Action

Correct this entry in the DM_IMPORT section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3673

ERROR: Invalid value

Description

The parameter values for the TPSUT_TYPE are either NotSupplied or INTEGER or PrintableString.

Action

Correct this entry in the DM_IMPORT section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3674

ERROR: TPSUT_TYPE must be specified as: INTEGER or PRINTABLESTRING

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The TPSUT parameter in the DM_IMPORT section must be preceeded by a TPSUT_TYPE parameter of either INTEGER or PrintableString.

Action

Correct this entry in the DM_IMPORT section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3675

ERROR: Invalid integer value

Description

The parameter values for the TPSUT is specified as INTEGER however there are alphanumeric ASCII characters instead of numeric values.

Action

Correct this entry in the DM_IMPORT section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3676

ERROR: REM_TPSUT <tpsut> is specified as INTEGER but contains a non-numeric ASCII value.

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The parameter values for the TPSUT is specified as INTEGER however there are alphanumeric ASCII characters instead of numeric values.

Valid values for INTEGER are "0123456789-"

Action

Correct this entry in the DM_IMPORT section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3677

ERROR: Invalid character value

Description

The parameter values for the TPSUT is specified as PrintableString however there are non valid alphanumeric ASCII characters.

Action

Correct this entry in the DM_IMPORT section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3678

ERROR: REM_TPSUT <tpsut> is specified as PRINTABLESTRING but contains a invalid ASCII value.

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The parameter values for the TPSUT is specified as PrintableString however there are invalid alphanumeric ASCII characters instead of numeric values.

Valid values for PrintableString are

0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz '(),+-./=?

Action

Correct this entry in the DM_IMPORT section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3680

ERROR: PRIORITY_TYPE(priority type) can only be either LOCAL_RELATIVE, LOCAL_ABSOLUTE, or GLOBAL

Description

An error was detected while trying to load the dmconfig(5) file as a result of the dmloadcf command. The priority type type must be set to one of: LOCAL_RELATIVE, LOCAL_ABSOLUTE, or GLOBAL.

Action

Correct the parameter specification in error and reload the configuration.

See Also

dmconfig(5)

3681

ERROR: Can't find REMOTE DOMAIN entry in table

Description

The GWADM administrative server received a request to dynamically update the REMOTE_DOMAIN entry. This message indicates that the update operation failed because it could not find the entry.

Action

Contact Oracle TUXEDO system Technical Support.

See Also

dmconfig(5)

3682

ERROR: Can't find REMOTE DOMAIN entry by link

Description

The GWADM administrative server received a request to dynamically update the REMOTE_DOMAIN entry. This message indicates that the update operation failed because it could not find the entry.

Action

Contact Oracle TUXEDO system Technical Support.

See Also

dmconfig(5)

3684

ERROR: INPRIORITY must be within the range 1 and 100 inclusive when LOCAL_ABSOLUTE specified

Description

An error was detected while trying to load the dmconfig(5) file as a result of the dmloadcf command. The priority INPRIORITY must be within the range 1 and 100 inclusive when the PRIORITY_TYPE has been set to LOCAL_ABSOLUTE.

Action

Correct the parameter specification in error and reload the configuration.

See Also

dmconfig(5)

3686

ERROR: INPRIORITY must be within the range -99 and 99 inclusive when LOCAL_RELATIVE or GLOBAL specified

Description

An error was detected while trying to load the dmconfig(5) file as a result of the dmloadcf command. The priority INPRIORITY must be within the range 1 and 100 inclusive when the PRIORITY_TYPE has been set to LOCAL_RELATIVE or GLOBAL.

Action

Correct the parameter specification in error and reload the configuration.

See Also

dmconfig(5)

3688

ERROR: GLOBAL can only be specified when TYPE is TDOMAIN

Description

While executing dmloadcf, the value for TYPE was not set to TDOMAIN. This is not allowed when PRIORITY_TYPE is set to GLOBAL.

Action

Correct the parameter specification in error and reload the configuration.

See Also

dmconfig(5)

3689

ERROR: Subtype specification not allowed in BUFTYPE="buffer type"

Description

An error was detected while trying to load the dmconfig(5) file as a result of the dmloadcf command. The buffer type buffer type must not include a ":subtype" subtype specification.

Action

Correct the parameter specification in error and reload the configuration.

See Also

dmconfig(5)

3690

ERROR: Subtype specification not allowed in BUFTYPE="buffer type"

Description

An error was detected while trying to load the dmconfig(5) file as a result of the dmloadcf command. The buffer type buffer type must not include a ":subtype" subtype specification.

Action

Correct the parameter specification in error and reload the configuration.

See Also

dmconfig(5)

3692

ERROR: CREDENTIAL_POLICY(CREDENTIAL_POLICY) can only be LOCAL or GLOBAL

Description

An error was detected while trying to load the dmconfig(5) file as a result of the dmloadcf command. The credential policyCREDENTIAL_POLICY must be LOCAL or GLOBAL.

Action

Correct the parameter specification in error and reload the configuration.

See Also

dmconfig(5)

3693

ERROR: Bad domain type for XATMI_ENCODING

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The XATMI_ENCODING parameter in the DM_OSITPX section is specified for the wrong type of domain. The XATMI_ENCODING parameter can only be specified for REMOTE domains of type OSITPX.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3694

ERROR: NWADDR=<nsap> contains an invalid format (IC = indicator_code)

Description

The dmloadcf(1) utility detected an error while processing the dmconfig(5) file. The NWADDR parameter in the DM_OSITPX section contains an invalid value. Refer to the returned indicator_code to correct the format of the NWADDR.

1 = a comma was seen and the expected network type was invalid.

2 = the dotted IP address could not be parsed. It must be in the format a.a.a.a

3 = IP port number is out of range. 1 <= port number <= 65535

4 = The IP address value is out of range, format a.a.a.a where 1 <= a <= 255

5 = The IP port number could not be parsed.

6 = CONS, CLNS address size is too large.

7 = CONS, CLNS invalid hex value

8 = Invalid network type. Must be IP, CONS, or CLNS

9 = Maximum number of NSAP values reached.

Action

Correct this entry in the DM_OSITPX section and retry the operation.

See Also

dmloadcf(1) and dmconfig(5)

3695

ERROR: Can't add OSITPX entry into table

Description

The GWADM administrative server received a request to dynamically add an address for a domain. This message indicates that the add operation failed. Check surrounding messages for specifics.

Action

Contact Oracle TUXEDO system Technical Support.

See Also

dmconfig(5)

3696

ERROR: Can't setup links from LOCAL DOMAIN entry to ositpx

Description

The GWADM administrative server received a request to dynamically add a listening address for the local dom ain. After successfully adding the entry in the ADDRESS table, it links the new address to the list of addr esses already existing in the shared memory. This message indicates that the GWADM server could not set up the links.

Action

Contact Oracle TUXEDO system Technical Support.

See Also

dmconfig(5)

3697

ERROR: Can't setup links from REMOTE DOMAIN entry to ositpx

Description

The GWADM administrative server received a request to dynamically add a new address for a remote domain. Af ter successfully adding the entry in the ADDRESS table, it links the new address to the list of addresses a lready existing in the shared memory. This message indicates that the GWADM server could not set up the lin ks.

Action

Contact Oracle TUXEDO system Technical Support.

See Also

dmconfig(5)

3698

ERROR: AET - must contain hex digits

Description

The Application Entity Title parameter AET specified in the DM_OSITP section contains invalid hex digits.

Action

Correct the AET parameter of the DM_OSITP section and retry the operation.

See Also

dmconfig(5)

3699

ERROR: AET - must contain an even number of hex digits

Description

An error was detected by the Domain Administrative server while processing a dynamic reconfiguration. The AET parameter specified was found to contain an odd number of hex digits. The AET parameter must contain and even number of hex digits.

Action

Correct the value of the AET parameter and retry the operation.

See Also

dmconfig(5)