System Messages: TMQ Catalog 2500-2599
|
2502 |
ERROR: qalias file length must be less than number characters. | |
|
Description |
The specified qalias file cannot exceed the system limit. |
Action |
Modify the specified qalias file name. | |
2503 |
ERROR: First temp queue must be from number1 to number2. | |
|
Description |
The first temp queue number can only be in range from number1 to number2. |
Action |
Modify the first specified temp queue. | |
2504 |
ERROR: Queue names must be less than the value for the FIRST_TEMP_QUEUE(number). | |
|
Description |
The numeric Queue names should be less than the previously specified FIRST_TEMP_QUEUE number. |
Action |
Modify the Queue names. | |
2505 |
ERROR: Link Driver XGROUP table size must be from 0 to number. | |
|
Description |
The specified Link Driver XGROUP table size should be from 0 to number. |
Action |
Modify the specified Link Driver XGROUP table size. | |
2506 |
ERROR: Link Driver ROUTE table size must be from 0 to number. | |
|
Description |
The specified Link Driver ROUTE table size should be from 0 to number. |
Action |
Modify the specified Link Driver ROUTE table size. | |
2510 |
WARN: Queue names in the ranges [74-76], [90-100], [150-199], [4000-6000] are reserved for internal use. | |
|
Description |
The specified numeric Queue name should not be in the ranges [74-76], [90-100], [150-199], [4000-6000], which are reserved for internal use. |
Action |
Modify the specified Queue name. | |
2530 |
Operation failed to complete (number). | |
|
Description |
The CLS server failed to setup signal handlers during initialization. Failed at line number. |
Action |
Try to re-boot the CLS server. | |
2538 |
Error re-allocating server buffer of number bytes | |
|
Description |
An attempt to re-allocate memory from the operating system using |
Action |
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
2551 |
MPP Confirm request error, invalid msg count number. | |
|
Description |
CLS server failed to confirm messages for client. The message number the client requests to confirm does not match the number of the messages stored by the CLS server. |
Action |
Modify the message number in the client request that needs to be confirmed. | |
2552 |
Error sends notification to client on hostname, | |
|
Description |
CLS server failed to send notification to the client on the hostname machine. |
Action |
Check the network connection to hostname. | |
2553 |
Error reading from link for client on hostname. | |
|
Description |
CLS server cannot read from the link to the hostname remote client. |
Action |
Check the network connection to hostname. | |
2554 |
Environment variables | |
|
Description |
To interoperate with OMQ, the CLS server needs the DMQ_BUS_ID and DMQ_GROUP_ID environment variables to be set. |
Action |
Properly export the DMQ_BUS_ID and DMQ_GROUP_ID environment variables. | |
2555 |
pams_attach_q failed, return status is status. | |
|
Description |
An attempt to attach queue failed. The error number is status. |
Action |
Do actions according to the returned error number. | |
2557 |
Error creating network link object. | |
|
Description |
CLS server failed to create a network link object using |
Action |
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
2560 |
Options opt1 and opt2 conflict. | |
|
Description |
CLS server cannot initialize with the invalid options pair opt1 and opt2. |
Action |
Check the specified option for CLS server. Remove the invalid options. | |
2561 |
Error reading from link for endpoint endpoint. | |
|
Description |
CLS server failed to read from link for endpoint endpoint. |
Action |
Check the connection to the endpoint endpoint. | |
2562 |
Too many parameters for the opt option. | |
|
Description |
The option opt for CLS server is not correct. Too many parameters are specified for this option. |
Action |
Check the specified option for CLS server. Remove the invalid parameters for the opt option. | |
2564 |
Required parameter to opt option is missing. | |
|
Description |
The option opt for CLS server is not correct. Some parameters are missing for this option. |
Action |
Check the specified option for CLS server. Add necessary parameters for the opt option. | |
2567 |
Required %s option is missing. | |
|
Description |
The |
Action |
Check the specified option for CLS server. Add necessary option for the CLS server. | |
2569 |
Listener initialization failure. | |
|
Description |
The CLS Server failed to create listener object using |
Action |
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
2572 |
Server initialization failure. | |
|
Description |
CLS server failed to initialize. |
Action |
Check other errors in | |
2573 |
Cannot bind to server address, endpoint may be in use. | |
|
Description |
CLS server failed to initialize due to invalid assigned endpoint. |
Action |
Modify the specified CLS server endpoint. | |
2575 |
Port numbers < 1024 are reserved. | |
|
Description |
CLS server failed to initialize due to invalid assigned endpoint. The endpoint port number should not be less than 1024. |
Action |
Modify the specified endpoint port number for the CLS server. | |
2577 |
Client message header version ver mismatch. | |
|
Description |
The CLS server received a client connection request that has an invalid message header version ver present. For connection request, the message header version should be "V2.0-1". |
Action |
Modify the client program to use valid message header version "V2.0-1". | |
2579 |
Incorrect connect request type, type. | |
|
Description |
The CLS server received a connection request that has an invalid message type in the header. |
Action |
Modify the client program to specify the valid message type in the message header. | |
2580 |
Error on accept. | |
|
Description |
The CLS server listener process failed to listen on its I/O object. |
Action |
Check the network status. | |
2589 |
Problem getting -e | |
|
Description |
The CLS server failed to initialize. Endpoint argument is missing. |
Action |
Modify the CLS server configuration to include the -e endpoint argument. | |
2590 |
ERROR:TuxCls Option parse initialization failed. | |
|
Description |
The CLS server failed to initialize due to invalid specified arguments. |
Action |
Modify the CLS server configuration to correct the arguments. | |
2591 |
Error allocating server buffer of number bytes. | |
|
Description |
An attempt to allocate memory from the operating system using |
Action |
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
2595 |
ERROR: TuxCls Option option is absent. | |
|
Description |
option is required when TuxCls is booted. If the option missing, an error is returned. |
Action |
Start up TuxCls with option. | |
2597 |
CLS_listener_machine in wrong state | |
|
Description |
TuxCls internal error. An evt event occurred unexpectedly. |
Action |
Contact Oracle Tuxedo Customer Support. |