CMDTUX メッセージ 0-99
1
ERROR:End time is before start time
ERROR: 終了時間が開始時間より前になっています。
説明
txrpt
ユーティリティ実行時に指定した開始時間 (-s
オプション) が終了時間 (-e
オプション) より後になっています。
アクション
正しい開始オプションと終了オプションを指定してコマンドを再実行します。
関連項目
txrpt
(1)
10
ERROR:Name table full
ERROR: ネーム・テーブルが一杯です。
説明
txrpt
ユーティリティの -n
オプションで指定したサービス名が多すぎるために、内部テーブルがオーバーフローしました。
アクション
サービス名を減らしてコマンドを再実行します。または、BEA TUXEDO システムの Technical Support にお問い合わせください。
関連項目
txrpt
(1)
15
ERROR:txrpt:bad -d arg
ERROR: txrpt: 間違った -d オプション値です: arg
説明
txrpt
コマンドを呼び出す際に指定した -d
オプションのパラメータが無効です。
アクション
-d
オプションを訂正してコマンドを再実行します。
関連項目
txrpt
(1)
16
ERROR:txrpt:bad -d option value arg
ERROR: txrpt: 間違った -d オプション値です: arg
説明
txrpt
コマンドを呼び出す際に指定した -d
オプションのパラメータが無効です。
アクション
-d
オプションを訂正してコマンドを再実行します。
関連項目
txrpt
(1)
17
WARN:BBL tpsvrinit:bad command line options were specified when booting the BBL
WARN: BBL tpsvrinit:BBL 起動時に間違ったコマンド行オプションが指定されています。
説明
BBL 起動時に間違ったコマンド行オプションが指定されました。
アクション
コマンド行オプションを訂正して BBL を起動します。
関連項目
tmboot
(1)
18
ERROR:BBL tpsvrinit:cannot find the DBBL entry in the Bulletin Board
ERROR: BBL tpsvrinit: 掲示板に DBBL のエントリが見つかりません。
説明
ネットワーク・アプリケーション (MP モード) で、BBL サーバ初期化ルーチンが掲示板に DBBL エントリを見つけることができません。DBBL がその独自の処理領域に保持している掲示板のコピーが破損している可能性があります。
アクション
Check if the DBBL is active. The DBBL should be booted before the BBL in a networked application. Try to shut down the application, remove IPC, and then reboot the DBBL and BBL. If the error persists, contact your BEA TUXEDO system Technical Support.
関連項目
tmboot
(1)
19
ERROR:BBL tpsvrinit:cannot update the DBBL entry in the Bulletin Board
ERROR: BBL tpsvrinit: 掲示板の DBBL のエントリを更新できません。
説明
ネットワーク・アプリケーション (MP モード) で、BBL サーバ初期化ルーチンが掲示板に DBBL エントリを見つけることができません。DBBL がその独自の処理領域に保持している掲示板のコピーが破損している可能性があります。
アクション
Check if the DBBL is active. The DBBL should be booted before the BBL in a networked application. Try to shut down the application, remove IPC, and then reboot the DBBL and BBL. If the error persists, contact your BEA TUXEDO system Technical Support.
関連項目
tmboot
(1)
20
ERROR:BBL tpsvrinit:cannot find the BBL entry in the Bulletin Board
ERROR: BBL tpsvrinit: 掲示板に BBL のエントリが見つかりません。
説明
BBL サーバ初期化ルーチンが、掲示板に BBL エントリを見つけることができません。
アクション
掲示板の破損が考えられます。アプリケーションをシャットダウンし、IPC を削除してから DBBL と BBL を再起動します。エラーが解消されない場合は、BEA TUXEDO システムの Technical Support にお問い合わせください。
関連項目
tmboot
(1)
21
ERROR:BBL tpsvrinit:cannot update the BBL entry in the Bulletin Board
ERROR: BBL tpsvrinit: 掲示板の BBL のエントリを更新できません。
説明
BBL サーバ初期化ルーチンが、掲示板の BBL エントリを更新できません。
アクション
掲示板の破損が考えられます。アプリケーションをシャットダウンし、IPC を削除してから DBBL と BBL を再起動します。エラーが解消されない場合は、BEA TUXEDO システムの Technical Support にお問い合わせください。
関連項目
tmboot
(1)
22
ERROR:Exceeds the maximum number of times for the BBL to get a new Bulletin Board
ERROR: BBL が新しい掲示板を獲得する回数が最大値を越えています。
説明
After every interval of value in scanunit
, the BBL
does sanity checks on the Bulletin Board. When the BBL
detects that the Bulletin Board is insane, it attempts to recover the Bulletin Board by getting a new one. When the maximum number of Bulletin Board uploads have been received, the BBL
will exit.
アクション
ローカル・マシン上の掲示板が破損している可能性があります。システムが回復できませんでした。BEA TUXEDO システムの Technical Support にお問い合わせください。
23
ERROR:Administrative service request servicename handled by BBL failed - msg
ERROR: BBL が取り扱う管理サービス要求 servicename が異常終了しました。: msg
説明
A service request handled by the BBL
failed. The request could be one of tmadmin
requests, tmconfig
requests, tpbroadcast
requests, and others.
アクション
If the error is an operating system error, the Uunixerr
and errno
will be printed. Check the userlog for earlier messages on the problem.
24
ERROR:The BBL could not bring down a paired bridge
ERROR: BBL は一対の BRIDGE を終了できません。
説明
Before the BBL
can shut down, it sends a shutdown message to its paired BRIDGE
and BSBRIDGE
. The paired bridges could not be brought down; the shutdown message was not created due to the insufficient memory space.
アクション
BEA TUXEDO システムの Technical Support にお問い合わせください。詳細については、LIBTUX_CAT メッセージ 683 を参照してください。
25
ERROR:The BBL could not bring down a paired bridge
ERROR: BBL は一対の BRIDGE を終了できません。
説明
Before the BBL
can shut down, it sends a shutdown message to its paired BRIDGE
and BSBRIDGE
. The paired bridges could not be brought down because sending the shutdown message to the BRIDGE
process failed.
アクション
BEA TUXEDO システムの Technical Support にお問い合わせください。詳細については、LIBTUX_CAT メッセージ 322、323、324、および 325 を参照してください。
26
INFO:The BBL is exiting system
INFO: BBL はシステムから EXIT します。
説明
The BBL
process has been shut down.
アクション
アクションは必要ありません。
関連項目
tmshutdown
(1)
27
ERROR:BBL bbclean:cannot re-attach to the Bulletin Board for recovery
ERROR: BBL bbclean:回復のための掲示板への再アタッチができません。
説明
After detecting that the Bulletin Board is corrupted, the BBL
failed to re-initialize and re-attach to the Bulletin Board.
アクション
マシン上の掲示板が破損していますが、回復できませんでした。BEA TUXEDO システムの Technical Support にお問い合わせください。
28
ERROR:BBL bbclean:cannot find the DBBL entry in the Bulletin Board
ERROR: BBL bbclean: 掲示板に DBBL のエントリが見つかりません。
説明
The Bulletin Board cleanup process cannot find the DBBL
entry in the Bulletin Board. The DBBL
's copy of the Bulletin Board in its own process space may be corrupted.
アクション
BEA TUXEDO システムの Technical Support にお問い合わせください。詳細については、上記のメッセージ 18 と 19 を参照してください。
29
ERROR:Memory allocation failure
ERROR: メモリの割り当てに失敗しました。
説明
An attempt dynamically to allocate memory from the operating system using malloc()
failed while cleaning the Bulletin Board.
アクション
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
30
ERROR:BBL bbclean cannot find BBL entries in the Bulletin Board
ERROR: BBL bbclean: 掲示板に BBL のエントリが見つかりません。
説明
The Bulletin Board cleanup process cannot find the BBL
entry in the Bulletin Board. The Bulletin Board may be corrupted.
アクション
BEA TUXEDO システムの Technical Support にお問い合わせください。
31
ERROR:BBL bbclean cannot find DBBL entry in the Bulletin Board
ERROR: BBL bbclean: 掲示板にDBBL のエントリが見つかりません。
説明
The Bulletin Board cleanup process cannot find the DBBL
entry in the Bulletin Board. The DBBL
's copy of the Bulletin Board in its own process space may be corrupted.
アクション
BEA TUXEDO システムの Technical Support にお問い合わせください。詳細については、この章のメッセージ 18 と 19 を参照してください。
32
ERROR:BBL bbclean cannot find queue entry for DBBL in the Bulletin Board
ERROR: BBL bbclean: 掲示板にDBBL のキュー・エントリが見つかりません。
説明
While attempting to clean up the Bulletin Board, the cleanup process was unable to find the queue entry associated with the DBBL
in its internal tables.
アクション
BEA TUXEDO システムの Technical Support にお問い合わせください。
33
ERROR:BBL bbclean cannot open Bulletin Board image, filename while restarting the DBBL
ERROR: BBL bbclean: DBBL を再起動中に掲示板のイメージ (filename) をオープンできません。
説明
While attempting to restart the DBBL
, the cleanup process cannot create a temporary file for the Bulletin Board.
アクション
Check and clean up space in either $TMPDIR
or /tmp
on your machine, or contact your BEA TUXEDO system Technical Support.
34
ERROR:BBL bbclean cannot write the Bulletin Board for restarting the DBBL
ERROR: BBL bbclean: DBBL を再起動するために掲示板に書き込みできません。
説明
While attempting to restart the DBBL
, the cleanup process was unable to write to the Bulletin Board.
アクション
Check free space and file permissions either in $TMPDIR
or /tmp
on your machine, or contact your BEA TUXEDO system Technical Support.
36
ERROR:BBL bbclean attempting to restart the DBBL failed
ERROR: BBL bbclean: DBBL を再起動中にエラーが発生しました。
説明
クリーンアップ・プロセスで、DBBL
を再起動できませんでした。 1) remote restart failed, 2) the TUXDIR
environment variable was not set, or 3) system()
call failed.
アクション
Check the remote connection and the TUXDIR
environment variable. Also, check the error returned from system()
call, or contact your BEA TUXEDO system Technical Support.
37
WARN:BBL received stray reply from the BBL's reply queue
ERROR: BBL は BBL の応答キューから不明な応答を受信しました。
説明
A stray reply message has appeared on the BBL
reply message queue.
アクション
アクションは必要ありません。
38
ERROR:BBL requested service service failed - errmsg
ERROR: BBL が要求したサービス service が異常終了しました: errmsg。
説明
The requested service handled by the BBL
failed.
アクション
この障害に関連するメッセージをユーザ・ログで調べます。
39
ERROR:BBL cannot find the DBBL
ERROR: BBL ヘ DBBL を見つけられません。
説明
While the BBL
is handling a service request, it cannot find DBBL
.
アクション
ネットワークが分断されていないか、または共用メモリが破損していないかを調べます。または、BEA TUXEDO システムの Technical Support にお問い合わせください。
40
WARN:BBL found an unexpected transaction state trans_state
WARN: BBL は予期しないトランザクション状態 trans_state を検出しました。
説明
While the BBL
is waiting for requests, it times out and performs a scan of the GTT
table every scanunit
seconds. An unexpected transaction state was detected in the GTT
table entry of the Bulletin Board.
アクション
No action required. However, the local groups participating in the transaction are notified. If the transaction is already decided, they are sent a commit request. Otherwise, an abort, timeout, or status request is sent to the TMS
s.
41
WARN:BBL found unexpected flag flagval in the message
WARN: BBL はメッセージ中に予期しないフラグ (flagval) を検出しました。
説明
While the BBL
is waiting for requests, it times out and performs a scan of the GTT
table every scanunit
seconds. Based on the location of the groups in transaction and transaction state, a different message will be sent to groups. However, an unexpected flag was detected in the message, and thus, no message was sent to the TMS
s.
アクション
アクションは必要ありません。
42
WARN:BBL failed to wake up the blocking process - pid
WARN: BBL はブロッキング・プロセス pid のウェイクアップが異常終了しました。
説明
After checking for transaction timeout, the BBL
goes through the registry table entry list and decrements the timeleft
field for blocking processes. If the timeleft
value becomes less than or equal to zero, the process is sent a message to be woken up. This error indicates that the BBL
fails to wake up the blocking process.
アクション
アクションは必要ありません。
43
WARN:SIGTERM was ignored while shutting down the BBL
ERROR: BBL のシャットダウン中に SIGTERM が無視されました。
説明
The SIGTERM
signal was received and ignored while shutting down the BBL
.
アクション
See tmshutdown
command for shutdown procedures.
関連項目
tmshutdown
(1)
44
ERROR:Must have a RESOURCES section
ERROR: RESOURCES セクションが必要です。
説明
The UBBCONFIG
file must include a RESOURCES section.
アクション
Add the RESOURCES section with appropriate values to the UBBCONFIG
file.
関連項目
ubbconfig
(5)
45
ERROR:Must have a MACHINES section
ERROR: MACHINES セクションが必要です。
説明
The UBBCONFIG
file must include a MACHINES section.
アクション
Add the MACHINES section with appropriate values to the UBBCONFIG
file.
関連項目
ubbconfig
(5)
46
WARN:Missing GROUPS section
ERROR: GROUPS セクションがありません。
説明
The GROUPS section is missing in the UBBCONFIG
file. This is not a fatal error since groups can be added via tmconfig
.
アクション
No action required if the groups will later be added via tmconfig
. In most cases, a GROUPS section would exist in the UBBCONFIG
file. If the GROUPS section is desired, it should be added to the UBBCONFIG
file.
関連項目
tmconfig
(1), ubbconfig
(5)
47
WARN:Missing SERVERS section
ERROR: SERVERS セクションがありません。
説明
The SERVERS section is missing in the UBBCONFIG
file. This is not a fatal error since servers can be added via tmconfig
.
アクション
No action required if the servers will later be added via tmconfig
. In most cases, a SERVERS section would exist in the UBBCONFIG
file. If the SERVERS section is desired, it should be added to the UBBCONFIG
file.
関連項目
tmconfig
(1), ubbconfig
(5)
48
WARN:Missing SERVICES section
ERROR: SERVICES セクションがありません。
説明
The SERVICES section is missing in the UBBCONFIG
file. This is not a fatal error since services can be added via tmconfig
.
アクション
No action required if the services will later be added via tmconfig
. In most cases, a SERVICES section would exist in the UBBCONFIG
file. If the SERVICES section is desired, it should be added to the UBBCONFIG
file.
関連項目
tmconfig
(1), ubbconfig
(5)
49
WARN:Missing NETWORK section
ERROR: NETWORK セクションがありません。
説明
The NETWORK section is missing in the UBBCONFIG
file. This is not a fatal error since network configurations can be added via tmconfig
.
アクション
No action required if the network configuration will later be added via tmconfig
. In most cases in which the MP
model and LAN
option are given, a NETWORK section would exist in the UBBCONFIG
file. If the NETWORK section is desired, it should be added to the UBBCONFIG
file. If the NETWORK section is not desired at all, then the LAN
option and/or MP
model should be checked.
関連項目
tmconfig
(1), ubbconfig
(5)
50
ERROR:Multiple machines cannot be configured for SHM mode
ERROR: 複数マシン環境では SHM モードを指定できません。
説明
The option of SHM
for MODEL
and having multiple machines defined in the MACHINES section are mutually exclusive.
アクション
Either MODEL
should be set to MP
in the RESOURCES section of the UBBCONFIG
file, or the MACHINES section of the configuration file should have no more than one machine.
関連項目
ubbconfig
(5)
51
ERROR:MIGRATE option cannot be used with SHM mode
ERROR: SHM モードでは MIGRATE オプションは指定できません。
説明
The MIGRATE
option in the RESOURCES section of the UBBCONFIG
file cannot be used with the SHM
value of MODEL
also in the RESOURCES section.
アクション
Either the MODEL
value must be changed from SHM
to MP
, or MIGRATE
must be removed from the OPTION
values in the UBBCONFIG
file.
関連項目
ubbconfig
(5)
53
ERROR:Can't have duplicate RESOURCES section
ERROR: RESOURCES セクションは重複して定義できません。
説明
There are multiple RESOURCES sections defined in the UBBCONFIG
file.
アクション
Remove the extraneous RESOURCES section from the UBBCONFIG
file.
関連項目
ubbconfig
(5)
54
ERROR:IPCKEY must be specified in RESOURCES section
ERROR: RESOURCES セクションに IPCKEY が指定されていません。
説明
The IPCKEY
parameter is required to be set in the RESOURCES section of the UBBCONFIG
file.
アクション
Set the IPCKEY
parameter in the RESOURCES section of the UBBCONFIG
file.
関連項目
ubbconfig
(5)
55
ERROR:MASTER must be specified in RESOURCES section
ERROR: RESOURCES セクションに MASTER が指定されていません。
説明
The MASTER
parameter is required to be set in the RESOURCES section of the UBBCONFIG
file.
アクション
Set the MASTER
parameter in the RESOURCES section of the UBBCONFIG
file.
関連項目
ubbconfig
(5)
56
ERROR:MODEL must be specified in RESOURCES section
ERROR: RESOURCES セクションに MODEL が指定されていません。
説明
The MODEL
parameter is required to be set in the RESOURCES section of the UBBCONFIG
file.
アクション
Set the MODEL
parameter in the RESOURCES section of the UBBCONFIG
file.
関連項目
ubbconfig
(5)
58
ERROR:MODEL must be MP for LAN option
ERROR: LAN オプションを指定する場合は MODEL を MP にしなければなりません。
説明
The MODEL
parameter must be set to MP
(multiple processors) if the LAN
option is specified in the OPTIONS
parameter in the RESOURCES section of the UBBCONFIG
file.
アクション
If the LAN
option is desired then the MODEL
parameter must be set to MP
in the RESOURCES section of the UBBCONFIG
file. If that option is not desired, the OPTION
parameter must be corrected to remove the LAN
option.
関連項目
ubbconfig
(5)
59
ERROR:SCANUNIT (number) must be a multiple of 5, > 0 and <= 60
ERROR: SCANUNIT (number) は 0 より大きく 60 以下の 5 の倍数でなければなりません。
説明
The value for the SCANUNIT
parameter in the RESOURCES section of the UBBCONFIG
file must be a multiple of 5, must be greater than 0, and must be less than or equal to 60.
アクション
Set the SCANUNIT
parameter in the RESOURCES section of the UBBCONFIG
file to a value that is a multiple of 5, greater than 0, and less than or equal to 60.
60
ERROR:SCANUNIT (value) must be a multiple of 2 or 5, > 0 and <= 60
ERROR: SCANUNIT (value) は 0 より大きく 60 以下の 2 または 5 の倍数でなければなりません。
説明
アクション
65
ERROR:Identifier string must be <= len characters in length
ERROR: 識別子 string の長さは len 文字以下でなければなりません。
説明
指定した識別子の値の長さが、指定された最大文字数を超えています。
アクション
Correct the length of the value of the identifier in the UBBCONFIG
file to be less than or equal to the specified number of characters.
関連項目
ubbconfig
(5)
67
ERROR:String string - must be <= len characters in length
ERROR: 文字列 string の長さは len 文字以下でなければなりません。
説明
指定された最大文字数を超える長さの文字列を指定しました。
アクション
Correct the string in the UBBCONFIG
file to be less than or equal to the specified number of characters.
関連項目
ubbconfig
(5)
70
ERROR:Identifier for MASTER must be <= len characters in length
ERROR: MASTER の識別子の長さは len 文字以下でなければなりません。
説明
The identifier specified for MASTER
in the RESOURCES section of the UBBCONFIG
file has a length that is greater than the specified maximum number of characters.
アクション
Correct the value for MASTER
as specified in the RESOURCES section of the UBBCONFIG
file to have a length less than or equal to the specified value.
関連項目
ubbconfig
(5)
72
ERROR:Identifier for MASTER must be <= len characters in length
ERROR: MASTER の識別子の長さは len 文字以下でなければなりません。
説明
The identifier specified for MASTER
in the RESOURCES section of the UBBCONFIG
file has a length that is greater than the specified maximum number of characters.
アクション
Correct the value for MASTER
as specified in the RESOURCES section of the UBBCONFIG
file to have a length less than or equal to the specified value.
関連項目
ubbconfig
(5)
73
ERROR:Invalid MASTER parameter - duplicate LMID lmidname specified
ERROR: MASTER パラメータが無効です。LMID lmidname が重複して宣言されています。
説明
A comma-separated pair of logical machine names was specified for the MASTER
field value in the RESOURCES section, but both values are the same. The first logical machine name represents the configuration primary machine, and the second logical machine name represents a backup machine to which the master may be migrated; they cannot be identical.
アクション
Correct the MASTER
parameter such that the LMID
values are unique, or don't specify a backup machine, and re-load the configuration.
関連項目
ubbconfig
(5)
76
ERROR:UID is not effective user ID
ERROR: UID は実効ユーザ ID ではありません。
説明
The value for UID
as specified in the RESOURCES section of the UBBCONFIG
file is not the effective user id of the tmloadcf
process. The effective UID
of the tmloadcf
process must be the same as the UID
specified in the RESOURCES section of the UBBCONFIG
file.
アクション
Change the UID
as specified in the RESOURCES section of the UBBCONFIG
file to the effective UID
of the user who will be running the tmloadcf
command. If this change is not desired, then the tmloadcf
command cannot be run by this user.
関連項目
ubbconfig
(5)
79
ERROR:GID is not effective group ID
ERROR: GID は実効グループ ID ではありません。
説明
The value for GID
as specified in the RESOURCES section of the UBBCONFIG
file is not the effective group id of the tmloadcf
process. The effective GID
of the tmloadcf
process must be the same as the GID
specified in the RESOURCES section of the UBBCONFIG
file.
アクション
Change the GID
as specified in the RESOURCES section of the UBBCONFIG
file to the effective GID
of the user who will be running the tmloadcf
command. If this change is not desired, then the tmloadcf
command cannot be run by this user.
関連項目
ubbconfig
(5)
81
ERROR:PERM parameter must be >= 1 and <= 0777
ERROR: PERM パラメータは 1 以上 0777 以下でなければなりません。
説明
The value for PERM
(permissions) as specified in the RESOURCES section of the UBBCONFIG
file is less than 1 or greater than 0777. PERM
must be greater than or equal to 1 and less than or equal to 0777.
アクション
Correct the value for PERM
as specified in the RESOURCES section of the UBBCONFIG
file to be greater than or equal to 1 and less than or equal to 0777.
関連項目
ubbconfig
(5)
83
ERROR: MAXACCESSERS parameter must be > 0 and < 32768
説明
The value for MAXACCESSERS
as specified in the RESOURCES section of the UBBCONFIG
file, is less than or equal to 0 or greater than or equal to 32768. MAXACCESSERS
must be greater than 0 and less than 32768.
アクション
Correct the value for MAXACCESSERS
as specified in the RESOURCES section of the UBBCONFIG
file to be greater than 0 and less than 32768.
関連項目
ubbconfig
(5)
85
ERROR:MAXSERVERS parameter must be > 0 and < 8192
ERROR: MAXSERVERS パラメータは 0 より大きく、かつ 8192 未満でなければなりません。
説明
The value for MAXSERVERS
as specified in the RESOURCES section of the UBBCONFIG
file, is less than or equal to 0 or greater than or equal to 8192. MAXSERVERS
must be greater than 0 and less than 8192.
アクション
Correct the value for MAXSERVERS
as specified in the RESOURCES section of the UBBCONFIG
file to be greater than 0 and less than 8192.
関連項目
ubbconfig
(5)
87
ERROR:MAXSERVICES parameter must be > 0 and < 32767
ERROR: MAXSERVICES パラメータは 0 より大きく、かつ 32768 未満でなければなりません。
説明
The value for MAXSERVICES
as specified in the RESOURCES section of the UBBCONFIG
file, is less than or equal to 0 or greater than or equal to 32768. MAXSERVICES
must be greater than 0 and less than 32768.
アクション
Correct the value for MAXSERVICES
as specified in the RESOURCES section of the UBBCONFIG
file to be greater than 0 and less than 32768.
関連項目
ubbconfig
(5)
89
ERROR: MAXGTT parameter must be >= 0 and < 32768
説明
The value for MAXGTT
as specified in the RESOURCES section of the UBBCONFIG
file, is less than or equal to 0 or greater than or equal to 32767. MAXGTT
must be greater than 0 and less than 32767.
アクション
Correct the value for MAXGTT
as specified in the RESOURCES section of the UBBCONFIG
file to be greater than 0 and less than 32768.
関連項目
ubbconfig
(5)
91
ERROR:MAXBUFTYPE parameter must be > 0 and < 32768
ERROR: MAXBUFTYPE パラメータは 0 より大きく、かつ 32768 未満でなければなりません。
説明
The value for MAXBUFTYPE
as specified in the RESOURCES section of the UBBCONFIG
file, is less than or equal to 0 or greater than or equal to 32768. MAXBUFTYPE
must be greater than 0 and less than 32768.
アクション
Correct the value for MAXBUFTYPE
as specified in the RESOURCES section of the UBBCONFIG
file to be greater than 0 and less than 32768.
93
ERROR:MAXBUFSUBTYPE parameter must be > 0 and < 32768
ERROR: MAXBUFSUBTYPE パラメータは 0 より大きく、かつ 32768 未満でなければなりません。
説明
The value for MAXBUFSUBTYPE
as specified in the RESOURCES section of the UBBCONFIG
file, is less than or equal to 0 or greater than or equal to 32768. MAXBUFSUBTYPE
must be greater than 0 and less than 32768.
アクション
Correct the value for MAXBUFSUBTYPE
as specified in the RESOURCES section of the UBBCONFIG
file to be greater than 0 and less than 32768.
関連項目
ubbconfig
(5)
95
ERROR:Identifier for TAGENT must be <= len characters in length
ERROR: TAGENT の識別子の長さは len 文字以下でなければなりません。
説明
The identifier specified for TAGENT
in the RESOURCES section of the UBBCONFIG
file has a length that is greater than the specified maximum number of characters.
アクション
Correct the value for TAGENT
as specified in the RESOURCES section of the UBBCONFIG
file to have a length less than or equal to the specified value.
関連項目
ubbconfig
(5)
96
ERROR:Can't have duplicate MACHINES section
ERROR: MACHINES セクションは重複して定義できません。
説明
There are multiple MACHINES sections defined in the UBBCONFIG
file.
アクション
Remove the extraneous MACHINES section from the UBBCONFIG
file.
関連項目
ubbconfig
(5)
97
ERROR:RESOURCES section must appear before MACHINES section
ERROR: RESOURCES セクションは MACHINES セクションの前に記述しなければなりません。
説明
The MACHINES section was put before the RESOURCES section in the UBBCONFIG
file. There must be a RESOURCES section before the MACHINES section.
アクション
Correct the UBBCONFIG
file to specify the RESOURCES section before the MACHINES section.
関連項目
ubbconfig
(5)
98
ERROR:lmidname specified in MASTER, but not defined in MACHINES section
ERROR: lmidname は MASTER で指定されていますが、MACHINES セクションで定義されていません。
説明
The identified machine was specified as the primary value of MASTER
in the RESOURCES section of the UBBCONFIG
file, but the machine was not defined in the MACHINES section.
アクション
Add the identified machine to the MACHINES section of the UBBCONFIG
file, or properly list a defined machine as the primary in the MASTER
parameter in the RESOURCES section.
関連項目
ubbconfig
(5)
99
ERROR:lmidname specified in MASTER, but not defined in MACHINES section
ERROR: lmidname は MASTER で指定されていますが、MACHINES セクションで定義されていません。
説明
The identified machine was specified as the alternate value of MASTER
in the RESOURCES section of the UBBCONFIG
file, but the machine was not defined in the MACHINES section.
アクション
Add the identified machine to the MACHINES section of the UBBCONFIG
file, or properly list a defined machine as the secondary in the MASTER
parameter in the RESOURCES section.
関連項目
ubbconfig
(5)