LIBTUX メッセージ 1300-1399
1301
WARN:Cannot update server group location as listed in bulletin board
WARN: 掲示板に指定されたようにサーバ・グループ位置を更新できません。
説明
While booting, a server process noticed that it was being booted on the processor listed as the backup processor for that server's group. (This situation occurs when tmboot
(1) is unable to boot the server group on the processor listed as the current processor for that group.) The server attempted to update the location of the group as stored in the bulletin board, but was unable to make the message required to update this information. This particular failure by itself will not cause the server to be incapable of processing service requests, but may be indicative of problems elsewhere in the system. The server will still be active and able to receive requests, but the first subsequent attempt to migrate the server will restart the server on the same processor where it is now running. Once this occurs, the server location will be stored consistently. Unless otherwise indicated by another error, the location of the server group will be stored properly in the TUXCONFIG file.
アクション
管理者は、グループ内のサーバがこのエラーをレポートして実行を継続するようにするか、サーバ・グループをシャットダウン、再起動して、グループ・ロケーションを掲示板に格納するようにするか選択できます。
関連項目
tmboot
(1), tmadmin
(1)
1302
ERROR:Commit error due to outstanding handles
ERROR: 未処理のハンドルのためにコミット・エラーがありました。
説明
未終了のハンドルがある場合に、トランザクションをコミットしようとしましたが、コミットできませんでした。
アクション
This is an application error. Make sure there are no outstanding handles before calling tpcommit()
.
1308
ERROR:TUXCONFIG environment variable must be an absolute pathname.
ERROR: TUXCONFIG は絶対パス名でなければなりません。
説明
アプリケーションで指定された TUXCONFIG 環境変数の値が相対パス名で、スラッシュ (/) で始まっていません。
アクション
TUXCONFIG 環境変数を絶対パス名に設定し、プログラムを実行し直します。
1309
ERROR:tpcommit failed to send message to TMS server
ERROR: TMS サーバにメッセージを送信するときに tpcommit が異常終了しました。
説明
The application called tpcommit()
, which tried to send a request to the transaction manager server for processing. No entry was found for the transaction manager server.
アクション
ユーザ・ログ内のほかのメッセージから、エラーの原因を調べます。またアプリケーション・サービスに関連するすべてのリソース・マネージャに対して、トランザクション・マネージャ・サーバが利用可能か調べます。
関連項目
tpcommit
(3c)
1351
ERROR:Performed tpforward() with outstanding conversations
ERROR: 未処理の会話を含む tpforward() を実行しました。
説明
The application called tpforward()
while there were outstanding conversations (for example, after calling tpconnect()
but before receiving a disconnect).
アクション
Correct the application such that tpforward()
is called only after all conversations and asynchronous request responses have been processed.
関連項目
tpconnect
(3c), tpforward
(3c)
1354
ERROR:Another application is using IPC key ipckey
ERROR: 他のアプリケーションが IPC キー ipckey を使用しています。
説明
The IPC key, ipckey, specified in the RESOURCES section of the UBBCONFIG file is being used by another BEA TUXEDO system application.
アクション
IPCKEY の値を変更してコンフィギュレーション・ファイルを再ロードし、アプリケーションを再起動します。
関連項目
tpenqueue
(3c)
1355
ERROR:Cannot find *MACHINES entry for MASTER master
ERROR: マスタ・マシン master の *MACHINES エントリが見つかりません。
説明
When joining the application, a client or server cannot find the configuration entry for the MASTER machine, master.
アクション
構成のロード時または更新時にエントリがチェックされるので、通常はこのエラーは発生しません。BEA TUXEDO システムの Technical Support にお問い合わせください。
関連項目
ubbconfig
(5)
1367
ERROR:Expired TUXEDO System Binary License
ERROR: TUXEDO システム・バイナリ契約が期限切れです。
説明
TUXEDO System/T のマスタ・バイナリが適切にライセンス許可されていないか、またはバイナリのライセンス期限が切れています。
アクション
BEA TUXEDO システムの Technical Support にお問い合わせください。
1372
ERROR:tpsuspend xa_end returned errstring
ERROR: tpsuspend xa_end から errstring が返されました。
説明
The call to xa_end
from within tpsuspend
returned the XA error value errstring.
アクション
対応するリソース・マネージャのエラー・レポート・メカニズムを調べ、問題の原因を調べます。BEA TUXEDO システムの Technical Support に問い合わせるか、リソース・マネージャのベンダに連絡します。
1373
ERROR:Wrong transaction state statestring
ERROR: 間違ったトランザクション状態 statestring です。
説明
tpsuspend was called while the transaction was not in an active state (for example, tpabort
or tpcommit
had already been called).
アクション
Correct the application such that it does not call tpsuspend
unless it is the current owner of the transaction.
関連項目
tpsuspend
(3c)
1374
ERROR:tpresume xa_start flags flagval returned errstring
ERROR: tpresume xa_start (フラグ flagval) が errstring を返しました。
説明
The call to xa_start
from within tpresume
with the XA flag value flagval (either TMJOIN or TMNOFLAGS) returned the XA error value errstring.
アクション
対応するリソース・マネージャのエラー・レポート・メカニズムを調べ、問題の原因を調べます。BEA TUXEDO システムの Technical Support に問い合わせるか、リソース・マネージャのベンダに連絡します。
1376
WARN:variable value "string" in environment does not match configuration "string"
WARN: 環境変数 variable の値 "string" は、コンフィギュレーション・ファイル内の記述 "string" と一致しないため、無視されました。
説明
While putting variables into the environment for either the machine or server ENVFILE
file, the TUXCONFIG
, TUXOFFSET
, TUXDIR
, or APPDIR
variable was encountered and its value did not match the associated value in the configuration file. This variable cannot be overridden in the ENVFILE
and its value is taken from the *MACHINES section of the configuration file for the associated machine. The modified value will not be put into the environment.
アクション
アクションは必要ありません。
関連項目
ubbconfig
(5)
1378
ERROR:Transaction counter <= 0
ERROR: トランザクション・カウンタが 0 以下です。
説明
システムは、新しいトランザクションを開始する際に、システム・カウンタに部分的に依存する固有のトランザクション識別子を作成します。このメッセージは、何らかの理由でカウンタが壊れていた場合に出力されます。
アクション
Contact your BEA TUXEDO system Technical Support. The bulletin board shared memory has probably been corrupted by a stray pointer or some other problem. Consider running tmadmin
's bbclean
command to verify the sanity of this site's bulletin board.
関連項目
tmadmin
(1)
1380
ERROR:Still in transaction
ERROR: トランザクション・モードです。
説明
A service routine explicitly started a transaction but did not commit or abort it before calling tpreturn
. The transaction was aborted by the system, and the caller received a TPESVCERR return code.
アクション
Modify the service routine to resolve the transaction before calling tpreturn
.
関連項目
tpreturn
(3c)
1381
ERROR:Cannot lock bulletin board
ERROR: 掲示板をロックできません。
説明
As part of tpreturn
's processing in transaction mode, an attempt to lock the bulletin board failed. The transaction was aborted.
アクション
共用メモリの破損か無効なアプリケーション IPCKEY がないか、または 2 つのアプリケーションが同じ IPCKEY を使用していないかを調べます。
1382
ERROR:Cannot unlock bulletin board
ERROR: 掲示板をロック解除できません。
説明
As part of tpreturn
's processing in transaction mode, an attempt to unlock the bulletin board failed. The transaction was aborted.
アクション
共用メモリの破損か無効なアプリケーション IPCKEY がないか、または 2 つのアプリケーションが同じ IPCKEY を使用していないかを調べます。
1383
ERROR:Cannot get counter value for new transaction
ERROR: 新規トランザクションのカウンタ値を取得できません。
説明
システムは、新しいトランザクションを開始する際に、システム・カウンタに部分的に依存する固有のトランザクション識別子を作成します。このメッセージは、何らかの理由でカウンタが壊れていた場合に出力されます。
アクション
Contact your BEA TUXEDO system Technical Support. The bulletin board shared memory has probably been corrupted by a stray pointer or some other problem. Consider running tmadmin
's bbclean
command to verify the sanity of this site's bulletin board.
関連項目
tmadmin
(1)
1384
ERROR:xa_start flags flags returned errcode
ERROR: xa_start フラグ flags が errcode を返しました。
説明
This message is issued if a process attempting to start a new transaction encounters an error when calling the database resource manager's xa_start()
routine. The transaction fails to begin. The message prints the flags passed to xa_start()
and the error code that xa_start()
returned.
アクション
Contact your BEA TUXEDO system Technical Support or your database system vendor. The database system documentation or error logs may contain more information about why xa_start()
failed.
1385
ERROR:xa_end returned errcode
ERROR: xa_end が errcode を返しました。
説明
This message is issued if a process attempting to commit a transaction encounters an error when calling the database resource manager's xa_end()
routine. The transaction will be aborted. The message prints the error code that xa_end()
returned.
アクション
Contact your BEA TUXEDO system Technical Support or your database system vendor. The database system documentation or error logs may contain more information about why xa_end()
failed.
1386
ERROR:xa_abort returned errcode
ERROR: xa_rollback が errcode を返しました。
説明
This message is issued if a process attempting to commit a transaction could not lock the bulletin board. It then attempted to roll back the transaction, and encountered an error when calling the database resource manager's xa_rollback()
routine [previously known as xa_abort()
]. The message prints the error code that xa_rollback()
returned.
アクション
BEA TUXEDO システムの Technical Support に問い合わせるか、データベース・システムのベンダに連絡します。xa_rollback()
が異常終了した原因の詳細については、データベース・システムのマニュアルか、エラー・ログを参照してください。
1387
ERROR:xa_commit returned errcode
ERROR: xa_commit が errcode を返しました。
説明
This message is issued if a process attempting to commit a transaction encountered an error when calling the database resource manager's xa_commit()
routine. The message prints the error code that xa_commit()
returned.
アクション
Contact your BEA TUXEDO system Technical Support or your database system vendor. The database system documentation or error logs may contain more information about why xa_commit()
failed.
1388
ERROR:Wrong transaction state state
ERROR: 間違ったトランザクション状態 state です。
説明
This message is issued when a transaction cannot be committed because the process is in an invalid transaction state (that is, a protocol violation). The process may have already called tpcommit
(3c) or tpabort
(3c) to resolve the transaction's state, and therefore is no longer in transaction mode. This message also prints out the current transaction state.
アクション
See the userlog for more information about this transaction's completion. Also, use tmadmin
's printtrans
command to find out more information about the transaction.
1389
ERROR:xa_end returned errcode
ERROR: xa_end が errcode を返しました。
説明
This message is issued if a process attempting to abort a transaction encounters an error when calling the database resource manager's xa_end()
routine. The message prints the error code that xa_end()
returned.
アクション
Contact your BEA TUXEDO system Technical Support or your database system vendor. The database system documentation or error logs may contain more information about why xa_end()
failed.
1390
ERROR:Too many groups in transaction, cannot add groupname
ERROR: トランザクション中のグループが多すぎます。groupname を追加できません。
説明
トランザクションにグループを追加する際に、1 つのトランザクション内に許可できる最大グループ数 (16 グループ) に達していたため、エラーが発生しました。トランザクションは中途終了します。
アクション
If possible, reduce the number of groups required for the particular operation, or call some of them with the TPNOTRAN flag. Using tpenqueue()
may allow some work involving additional groups to be done later as part of another transaction. If that is not possible, contact your BEA TUXEDO system Technical Support.
1391
WARN:tpreturn called outside service routine
WARN: tpreturn が サービス・ルーチン外から呼び出されました。
説明
tpreturn()
was called in an invalid context.
アクション
Modify the application code calling tpreturn()
.
関連項目
tpreturn
(3c)
1392
WARN:tpreturn called with invalid flags 0xflags
WARN: tpreturn が 無効なフラグ 0xflags を指定して呼び出されました。
説明
tpreturn()
was called with an invalid flag parameter. This userlog message is issued because control will not return to the service routine. Instead, the process invoking the service routine will receive a TPESVCERR return code.
アクション
Modify the application code calling tpreturn()
.
関連項目
tpreturn
(3c)
1393
WARN:tpreturn called with TPEXIT
WARN: tpreturn が TPEXIT で呼び出されました。
説明
tpreturn()
was called with the TPEXIT flag value. This userlog message is issued because control will not return to the service routine, and the server process will be restarted. The process invoking the service routine will receive a TPESVCERR return code.
アクション
アプリケーション開発者に、サーバ・プロセスが失敗し再起動を要求する理由を問い合わせます。
関連項目
tpreturn
(3c)
1394
WARN:tpreturn called with invalid rval number
WARN: tpreturn が 無効な引数 rval = number を指定して呼び出されました。
説明
tpreturn()
was called with an invalid rval parameter. This userlog message is issued because control will not return to the service routine. Instead, the process invoking the service routine will receive a TPESVCERR return code.
アクション
Modify the application code calling tpreturn()
.
関連項目
tpreturn
(3c)
1395
WARN:tpreturn failed because connection not SENDONLY
WARN: 接続が SENDONLY モードでないために tpreturn が異常終了しました。
説明
tpreturn()
was called in an invalid conversational context. The caller should be in SENDONLY mode when attempting to successfully end the conversation. This userlog message is issued because control will not return to the service routine. Instead, the process invoking the service routine will receive a TPESVCERR return code.
アクション
Modify the application logic so that the service routine has SENDONLY control of the conversation before calling tpreturn()
.
関連項目
tpconnect
(3c), tpreturn
(3c)
1396
WARN:tpreturn failed because subordinate conversations open
WARN: tpreturn が サブオーディネート会話がオープン中であるために異常終了しました。
説明
tpreturn()
was called in an invalid conversational context. The caller should successfully end all conversations it initiated before calling tpreturn()
with TPSUCCESS. This userlog message is issued because control will not return to the service routine. Instead, the process invoking the service routine will receive a TPESVCERR return code.
アクション
Modify the application logic so that the service routine ends all conversations it started before calling tpreturn()
.
関連項目
tpconnect
(3c), tpreturn
(3c)
1397
WARN:tpreturn transaction processing failure
WARN: tpreturn トランザクション処理が異常終了しました。
説明
tpreturn()
encountered a transaction processing error, and the transaction will be aborted (if it has not been already). One possible cause might be the service routine ran for a very long time, and the transaction timed out before tpreturn()
was called. This userlog message is issued because control will not return to the service routine. The process invoking the service routine will receive an error return code.
アクション
See the userlog for more information about this transaction's completion. Also, use tmadmin
's printtrans
command to find out more information about the transaction.
関連項目
tmadmin
(1)
1398
WARN:tpforward called outside service routine
WARN: tpforward がサービス・ルーチンの外から呼び出されました。
説明
tpforward()
was called in an invalid context.
アクション
Modify the application code calling tpforward()
.
関連項目
tpforward
(3c)
1399
WARN:tpforward called with invalid flags 0xflags
WARN: tpforward が無効なフラグ 0xflags で呼び出されました。
説明
tpforward()
was called with an invalid flag parameter. This userlog message is issued because control will not return to the service routine. Instead, the process invoking the service routine will receive a TPESVCERR return code.
アクション
Modify the application code calling tpforward()
.
関連項目
tpforward
(3c)