检验并实施配置

检验是否已配置所有设备并实施已修改或新设备条目。

如何检验是否已配置所有设备并实施更改

1. 使用 cfgadm 命令列出包含在 SAM-QFS 环境中的设备。

   例如：

   # cfgadm -al
   Ap_Id                          Type         Receptacle   Occupant     Condition
   c0                             scsi-bus     connected    configured   unknown
   c0::dsk/c0t6d0                 CD-ROM       connected    configured   unknown
   c1                             fc-private   connected    configured   unknown
   c1::500000e0103c3a91           disk         connected    configured   unknown
   c2                             scsi-bus     connected    unconfigured unknown
   c3                             scsi-bus     connected    unconfigured unknown
   c4                             scsi-bus     connected    configured   unknown
   c4::dsk/c4t1d0                 disk         connected    configured   unknown
   c4::dsk/c4t2d0                 disk         connected    configured   unknown
   c5                             fc-fabric    connected    configured   unknown
   c5::100000e00222ba0b           disk         connected    unconfigured unknown
   c5::210000e08b0462e6           unknown      connected    unconfigured unknown
   c5::210100e08b2466e6           unknown      connected    unconfigured unknown
   c5::210100e08b27234f           unknown      connected    unconfigured unknown
   c5::500104f00043abfc           tape         connected    configured   unknown
   c5::500104f00043bc94           tape         connected    configured   unknown
   c5::500104f00045eeaf           tape         connected    configured   unknown
   c5::500104f000466943           tape         connected    configured   unknown
   c5::500104f00046b3d4           tape         connected    configured   unknown
   c5::500104f0004738eb           tape         connected    configured   unknown
   c6                             fc           connected    unconfigured unknown
   c7                             scsi-bus     connected    unconfigured unknown
   c8                             scsi-bus     connected    unconfigured unknown
   usb0/1                         usb-kbd      connected    configured   ok
   usb0/2                         usb-mouse    connected    configured   ok
   usb0/3                         unknown      empty        unconfigured ok
   usb0/4                         unknown      empty        unconfigured ok

2. 检查输出，以确保其中显示了您希望在 SAM-QFS 环境中配置的所有设备。

   如果未配置设备，请使用 cfgadm 命令进行配置。请参见 cfgadm(1M) 手册页。

   您可能会收到一条类似以下内容的错误：

   # cfgadm -c configure -o force_update c4::500104f000489fe3
   cfgadm: Library error: failed to create device node: 500104f00043abfc: Device busy

   尽管存在此错误，但 cfgadm 命令仍会处理请求。

3. 重新引导系统，使对 st.conf 和 samst.conf 文件所做的更改生效。

   # reboot -- -r