跳过导航链接 | |
退出打印视图 | |
Oracle Solaris Cluster 4.1 发行说明 Oracle Solaris Cluster 4.1 (简体中文) |
1. Oracle Solaris Cluster 4.1 发行说明
支持将 Trusted Extensions 与区域群集结合使用
支持内核区域 (kernel cage) 动态重新配置 (Dynamic Reconfiguration, DR)
用于配置 Oracle PeopleSoft Application Server 数据服务的新的 clsetup 向导
用于配置 Oracle WebLogic Server 数据服务的新的 clsetup 向导
针对 Oracle Traffic Director 的新数据服务
新的 Oracle PeopleSoft Enterprise Process Scheduler 数据服务
支持 Oracle E-Business 12.1.1 数据服务
在 Geographic Edition 中支持 Sun ZFS Storage Appliance 数据复制
在 Geographic Edition 中支持 EMC Symmetrix Remote Data Facility
在 Geographic Edition 中支持 MySQL 复制
针对 ccradm 和 dcs_config 高级维护命令的新手册页
Oracle Solaris Cluster 4.1 软件未包括的功能
区域群集中的 Solaris Volume Manager 磁盘集
逻辑主机在发生公共网络故障时不进行故障转移 (16979921)
Oracle ASM 与 Solaris Volume Manager 镜像逻辑卷
在执行 GI root.sh 和启动 CRS 期间,S10 标记区域中的 osysmond 进行核心转储 (14456069)
Oracle Clusterware 无法为 ora.asm 资源创建所有 SID (12680224)
由于 pkg 命令过时,导致 Oracle Solaris 11 SRU 安装可能失败
无法使用 clzonecluster install-cluster 仅将修补程序安装到 solaris10 标记区域群集 (7200532)
向 IPMP 组添加主适配器将删除 DNS 配置 (7198718)
SAP JAVA 问题影响 HA for SAP NetWeaver 在意外中断时进行故障转移的能力 (7191360)
如果未安装 pkg:/system/resource-mgmt/resource-cap,但配置了 capped-memory,则区域不会引导 (7087700)
Geographic Edition 不支持主动-主动 ZFS Storage Appliance 群集配置 (6770212)
clzc reboot 命令导致 solaris10 标记专用 IP 区域群集以使全局区域节点发生紧急情况 (16941521)
在专用 IP 区域群集的区域中执行 /usr/sbin/shutdown 命令可能会导致该区域群集的其他正在运行的区域停止 (16963753)
svc_private_network:default SMF 服务在 solaris10 标记专用 IP 区域群集中进入维护状态 (16716992)
无法为 clprivnet 接口设置巨型帧 (Jumbo Frame) MTU 大小 (16618736)
公网故障不会使对具有 SCAN 侦听器的 DB 服务器资源进行故障转移 (16231523)
数据服务配置向导不支持可伸缩 HAStoragePlus 的存储资源和资源组 (7202824)
从独占 IP 区域群集中删除节点将使群集节点出现紊乱 (7199744)
privnet 不存在将使区域群集停止引导,即使有良好的 privnet (7199431)
clzonecluster 命令无法检验在未指定 allowed-addr 时是否无法指定 defrouter,CCR 配置失败 (7199135)
如果任意一个群集节点不在群集中,clzonecluster boot、reboot 和 halt 子命令将失败 (7193998)
在 PxFS 辅助服务器上的非全局区域中使用 chmod 设置 setuid 权限会返回错误 (7020380)
无法基于配置文件创建具有不可调整扩展属性的资源 (6971632)
当群集中存在负载时禁用设备隔离会导致预留空间冲突 (6908466)
如果复制的设备组状态会导致状态间切换和切换回原状态失败,EMC SRDF 将拒绝在状态间切换 (6798901)
从群集配置中删除节点可能会导致节点出现紊乱 (6735924)
组合 DID 时,需要进行更多的验证检查 (6605101)
HA for TimesTen 不支持“活动-备用”配置 (16861602)
无法更新区域群集中使用 NAS 配置的 SUNW.ScalMountPoint 资源的属性 (7203506)
无法访问在区域群集的可伸缩 HAStoragePlus 资源中配置的全局文件系统 (7197623)
RAC 向导失败,显示 "ERROR: Oracle ASM is either not installed or the installation is invalid!" (7196184)
如果将 WebLogic Server 安装在 NFS 中,在区域/区域群集中配置 WebLogic Server 域时,clsetup 向导将失败 (7196102)
大量 GDS 资源不识别网络,一些资源无法重新启动并保持脱机状态 (7189659)
SUNW.Proxy_SMF_failover sc_delegated_restarter 文件描述符泄漏 (7189211)
如果设置 Debug_level=1,pas-rg 将故障转移到节点 2,并且再也无法在节点 1 上启动 (7184102)
同时在多个节点上运行 clnas add 或 clnas remove 命令会出现问题 (6791618)
clresource show -p 命令返回错误信息 (7200960)
群集节点对 Sun ZFS Storage Appliance 项目或 iSCSI LUN 没有访问权限 (15924240)
某个伙伴上持续报告 DR 状态为 unknown (7189050)
接管到辅助站点失败,因为 fs umount 在主站点上失败 (7182720)
如果使用 BUI 停止项目复制,则创建和验证 ZFS Storage Appliance 保护组将失败 (7176292)
使用区域群集时从全局群集发送多个通知电子邮件 (7098290)
不指定修补程序选项则无法在现有的 3.3 5/11 solaris10 标记区域上安装数据服务代理 (7197399)
将 install 而非 install-cluster 用于 solaris10 标记区域时,clzonecluster 不报告错误 (7190439)
当主机名中包含大写字母时,创建 ASM 实例代理资源将出错 (7190067)
当群集节点的主机名中包含大写字母时,创建 RAC 代理资源将失败 (7189565)
进行 solaris10 标记区域的非交互式数据服务安装时很难获取数据服务名称 (7184714)
Cacao 在运行 Trusted Extensions 的计算机上无法进行通信 (7183625)
clnode remove -F nodename 命令无法从 Solaris Volume Manager 设备组中删除节点 nodename (6471834)
自动搜索应当只为每个适配器找到一个互连路径 (6299097)
逻辑主机名故障转移会产生重复地址而导致中断 (7201091)
sc_delegated_restarter 未将清单中设置的环境变量考虑在内 (7173159)
使用 ipadm disable-if -t interface 禁用传输接口后无法重新启用 (7141828)
getnetmaskbyaddr() 导致逻辑主机名的故障转移失败 (7075347)
x86: scinstall -u update 有时无法升级 x86 节点上的群集软件包 (7201491)
本节介绍了 Oracle Solaris Cluster 和 Geographic Edition 4.1 发行版的文档中的错误或遗漏。
在多个章节中,scinstall -u update 命令的语法缺少了在需要时指定许可证信息的选项。该命令的完整语法如下:
# scinstall -u update -b [-b bename] [-L accept,licenses]
有关 -L 选项的更多信息,请参见 scinstall(1M) 手册页。
在"Setting HA for Oracle Extension Properties" in 《Oracle Solaris Cluster Data Service for Oracle Guide 》中,仅当使用 Oracle Grid Infrastructure 时,Oracle 服务器资源的所需扩展属性列表才有效。如果不使用 Oracle Grid Infrastructure,Oracle 服务器资源也需要以下扩展属性:
Connect_string
Alert_log_file
有关 Connect_string 和 Alert_log_file 扩展属性的信息,请参见 SUNW.oracle_server(5) 手册页。
在"How to Prepare the Nodes" in 《Oracle Solaris Cluster Data Service for Oracle Guide 》中,更正了步骤 7 并添加了步骤 8,如下所述:
7. 如果您使用的是区域群集,请使用 clzonecluster 命令来配置 limitpriv 属性。
# clzonecluster configure zcname clzonecluster:zcname>set limitpriv="default,proc_priocntl,proc_clock_highres" clzonecluster:zcname>commit
8. 在每个区域群集节点上,阻止 Oracle Clusterware 时间同步以主动模式运行。
以 root 用户身份登录到区域群集节点。
创建空的 /etc/inet/ntp.conf 文件。
# touch /etc/inet/ntp.conf
第 1 章中的过程"如何在区域群集中为 Oracle RAC 软件设置所需的特权"包含不正确的信息。正确的过程如下所述:
成为托管区域群集的全局群集节点上的超级用户。
使用 clzonecluster 命令配置 limitpriv 属性。
# clzonecluster configure zcname clzonecluster:zcname>set limitpriv ="default,proc_priocntl,proc_clock_highres" clzonecluster:zcname>commit
从 Oracle RAC 版本 11g R2 开始,阻止 Oracle Clusterware 时间同步在活动模式下运行。
以 root 用户身份登录到区域群集节点。
创建空的 /etc/inet/ntp.conf 文件。
# touch /etc/inet/ntp.conf
"How to Install a Zone and Perform the Initial Internal Zone Configuration" in 《Oracle Solaris Cluster Data Service for Oracle Solaris Zones Guide 》中缺少以下说明。请在步骤 6b 之后立即执行此步骤:
c.In the node where you updated the new UUID in the boot environment, if there are other non-global zones of brand type solaris configured, set the same UUID on the active boot environment for each non-global zone of brand type solaris.
phys-schost-2# zfs set org.opensolaris.libbe:parentbe=uuid poolname/zonepath/rpool/ROOT/bename
For example:
phys-schost-2# zoneadm list -cv … 1 myzone1 running /zones/myzone1 solaris shared … phys-schost-2# zlogin myzone1 beadm list -H solaris;4391e8aa-b8d2-6da9-a5aa-d8b3e6ed6d9b;NR;/;606941184;static;1342165571 phys-schost-2# zfs set org.opensolaris.libbe:parentbe=8fe53702-16c3-eb21-ed85-d19af92c6bbd \ rpool/zones/myzone1/rpool/ROOT/solaris
Oracle Solaris Cluster 4.1 软件支持 Solaris Volume Manager 软件。Oracle Solaris 11 文档集未包括 Solaris Volume Manager 软件的手册。不过,您仍可以使用 Oracle Solaris 10 9/10 发行版的《Solaris Volume Manager Administration Guide》,它也适用于 Oracle Solaris Cluster 4.1 发行版。
过程"How to Add an Application Resource Group to an Availability Suite Protection Group"中缺少以下说明:
If the application resource group to add is configured with a raw-disk device group, that device group must be specified in the resource group configuration by its data volume, rather than by its device group name.This ensures that the resource will remain monitored after the application resource group is added to a protection group.
For example, if the device group rawdg has a corresponding data volume of /dev/global/rdsk/d1s0, you must set the GlobalDevicePaths property of the application resource group with the data volume, as follows:
# clresourcegroup set -p GlobalDevicePaths=/dev/global/rdsk/d1s0 rawdg
本节讨论下列 Oracle Solaris Cluster 手册页中的错误、遗漏之处以及新增内容:
(cluster) ip-type 属性错误地表示只有 shared 才是受支持的值。实际上 shared 和 exclusive ip-types 均受支持。
privnet 资源名称中错误地包含了连字符 (priv-net)。正确的资源名称为 privnet。
在 "Description" 部分中,第七个要点必须显示如下:
The resource group weak positive affinities must ensure that the SAP central service resource group fails over to the node where the SAP replicated enqueue resource group is online.If an ORCL.saprepenq_preempt resource is not configured, it must be implemented by strong negative affinities such that the replicated enqueue server resource group is off-loaded from the failover target node before the SAP central service resource group is started.
在示例 1 中,执行以下更改:
Change: -p resource_dependencies=bono-1,db-rs,scs-strt-rs To: -p resource_dependencies=db-rs,scs-strt-rs
在 "Description" 部分中,第七个要点必须显示如下:
The resource group weak positive affinities must ensure that the SAP central service resource group fails over to the node where the SAP replicated enqueue resource group is online.If an ORCL.saprepenq_preempt resource is not configured, it must be implemented strong negative by affinities such that the replicated enqueue server resource group is off-loaded from the failover target node before the SAP central service resource group is started.
在 "Description" 部分中,第八个要点必须显示如下:
The resource group weak positive affinities must ensure that the SAP central service resource group fails over to the node where the SAP replicated enqueue resource group is online.If an ORCL.saprepenq_preempt resource is not configured, it must be implemented by strong negative affinities such that the replicated enqueue server resource group is off-loaded from the failover target node before the SAP central service resource group is started.If the replicated enqueue preempter resource is configured, it is the task of this resource to off-load the replicated enqueue server resource group to a spare node after the enqueue tables are copied.
在 "Name" 部分中,描述资源类型的句子必须显示如下:
resource type implementation for processing sapstartsrv of Oracle Solaris Cluster HA for SAP NetWeaver
在示例 1 中,执行以下更改:
Change: /usr/cluster/bin/clrs create -d -g pas-rg -t sapstartsrv To: /usr/cluster/bin/clrs create -d -g scs-rg -t sapstartsrv
Ping_interval 属性的最小值不正确。该值应为 20,而非 60。
该手册页中 "effective user ID"(有效用户 ID)的使用不正确。正确的术语为 "real user ID"(实际用户 ID)(适用于所有位置)。有关实际用户 ID 和有效用户 ID 之间的区别的信息,请参见 setuid(2) 手册页。
对 RebootOnFailure 属性的描述中,第二段不正确。正确的段落如下:
If RebootOnFailure is set to TRUE and at least one device is found available for each entity specified in the GlobalDevicePaths, FileSystemMountPoints, or Zpools property, the local system is rebooted.The local system refers to the global-cluster node or the zone-cluster node where the resource is online.
对 RebootOnFailure 属性的描述中,第二段不正确。正确的段落如下:
If RebootOnFailure is set to TRUE and at least one device is found available for each entity specified in the GlobalDevicePaths, FileSystemMountPoints, or Zpools property, the local system is rebooted.The local system refers to the global-cluster node or the zone-cluster node where the resource is online.
对 RebootOnFailure 属性的描述中,第二段不正确。正确的段落如下:
If RebootOnFailure is set to TRUE and at least one device is found available for each entity specified in the GlobalDevicePaths, FileSystemMountPoints, or Zpools property, the local system is rebooted.The local system refers to the global-cluster node or the zone-cluster node where the resource is online.