システム・メッセージ: CMDTUXカタログ4500-4599
|
![]() |
![]() |
4500 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。 マシンのメモリー使用量を減らすか、マシンの物理メモリーまたはスワップ領域、あるいはその両方の量を増やしてください。 | |
4501 |
エラー: TUXEDOの型付きバッファのルーチンが失敗しました | |
|
説明 |
TMSでメッセージを作成しようとしましたが、メモリーの割当て以外の理由で失敗しました。 |
アクション |
失敗の原因を示す他のメッセージがログに前出していないか確認してください。 | |
4503 |
WARN: BBL failed to wake up the blocking process - val. TPERRNO - val | |
|
Description |
The BBL found a blocking process and tried to format a message to wake up the process. The message generation failed and the process will not be awaken immediately. |
Action |
Check the log for other related messages. It may be a memory allocation failure. | |
4504 |
ERROR: Memory allocation error receiving reply from TAGENT on lmid | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory and/or swap space on the machine. | |
4507 |
WARN: FACTORYROUTING val (for INTERFACE interfacename) is not defined in the ROUTING section | |
|
Description |
The entry in the |
Action |
Correct the configuration and re-load. | |
See Also |
| |
4511 |
ERROR: Duplicate *INTERFACES section | |
|
Description |
There are multiple INTERFACES sections defined in the |
Action |
Remove the extraneous INTERFACES section from the | |
See Also |
| |
4512 |
ERROR: *GROUPS section must appear before *INTERFACES section | |
|
Description |
The INTERFACES section was put before the GROUPS section in the |
Action |
Correct the | |
See Also |
| |
4513 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。 マシンのメモリー使用量を減らすか、マシンの物理メモリーまたはスワップ領域、あるいはその両方の量を増やしてください。 | |
4514 |
ERROR: Could not initialize sort of *INTERFACES section | |
|
Description |
An internal error occurred while attempting to sort the INTERFACES section during |
Action |
Attempt to load the configuration again via | |
See Also |
| |
4515 |
ERROR: Could not turnaround sort of *INTERFACES section | |
|
Description |
An internal error occurred while attempting to sort the INTERFACES section of the configuration file during |
Action |
Attempt to load the configuration again via | |
See Also |
| |
4516 |
ERROR: Couldn't retrieve data from *INTERFACES sort | |
|
Description |
An internal error occurred while attempting to sort the INTERFACES section of the configuration file during |
Action |
Attempt to load the configuration again via | |
See Also |
| |
4518 |
ERROR: Interface id must be <= val characters in length | |
|
Description |
The |
Action |
Specify an interface name value that is less than or equal to 15 characters in length. | |
See Also |
| |
4519 |
ERROR: Need different SRVGRP for the INTERFACE val. | |
|
Description |
The same interface has been specified more than once, but the |
Action |
Edit the | |
See Also |
| |
4520 |
ERROR: INTERFACE val can't have SRVGRP val on different entry. | |
|
Description |
The same interface has been specified more than once, using the same |
Action |
Edit the | |
See Also |
| |
4522 |
ERROR: Interfaces val can't have two different ROUTING values | |
|
Description |
The indicated interface name has two different routing criteria associated with it. |
Action |
Edit the configuration file such that if multiple ROUTING entries exist for the same interface name but have different | |
See Also |
| |
4523 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。 マシンのメモリー使用量を減らすか、マシンの物理メモリーまたはスワップ領域、あるいはその両方の量を増やしてください。 | |
4524 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。 マシンのメモリー使用量を減らすか、マシンの物理メモリーまたはスワップ領域、あるいはその両方の量を増やしてください。 | |
4525 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。 マシンのメモリー使用量を減らすか、マシンの物理メモリーまたはスワップ領域、あるいはその両方の量を増やしてください。 | |
4526 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。 マシンのメモリー使用量を減らすか、マシンの物理メモリーまたはスワップ領域、あるいはその両方の量を増やしてください。 | |
4527 |
ERROR: AUTOTRAN specified for INTERFACE interface_name SRVGRP groupname with no TMS. | |
|
Description |
An entry for interface interface_name with group name groupname in the INTERFACES section of the |
Action |
Either set the | |
See Also |
| |
4528 |
WARN: AUTOTRAN specified for INTERFACE interface_name with TRANTIME=0. | |
|
Description |
An entry for interface interface_name in the INTERFACES section of the |
Action |
It is recommended that a transaction timeout value be specified. | |
See Also |
| |
4529 |
ERROR: Failure during input to sort of *INTERFACES section | |
|
Description |
The |
Action |
Check that there is available temporary disk space in | |
See Also |
| |
4531 |
ERROR: LOAD parameter must be >= 1 and <= 32767 | |
|
Description |
The |
Action |
Specify a value that is between 1 and 32,767, inclusive. | |
See Also |
| |
4533 |
ERROR: PRIO parameter must be >= 1 and <= 100 | |
|
Description |
The |
Action |
Specify a value that is between 1 and 100, inclusive. | |
See Also |
| |
4535 |
ERROR: FACTORYROUTING factoryrouting_name must be <= val characters | |
|
Description |
The factoryrouting_name of the INTERFACES section of the configuration file must be <= 15 characters. |
Action |
Specify a value that is less than or equal to 15 characters. | |
See Also |
| |
4537 |
ERROR: TRANTIME parameter must be >= 0 and < 2147483648 | |
|
Description |
The |
Action |
Specify a value that is between 0 and 2,147,483,647, inclusive. | |
See Also |
| |
4539 |
ERROR: The SRVGRP parameter must be <= val characters | |
|
Description |
The |
Action |
Choose a | |
See Also |
| |
4541 |
ERROR: Group name val must match a name from the *GROUPS section | |
|
Description |
The |
Action |
Correct the | |
See Also |
| |
4543 |
ERROR: TIMEOUT parameter must not be < 0 | |
|
Description |
The |
Action |
Change the parameter value in the | |
See Also |
Oracle TUXEDO Administrator's Guide, | |
4544 |
ERROR: BUFTYPE parameter not allowed for FACTORY ROUTING | |
|
Description |
A |
Action |
Change the entry | |
See Also |
| |
4545 |
ERROR: Duplicate *ROUTING entry val for FACTORYROUTING | |
|
Description |
More than one entry in the |
Action |
Remove the duplicate entry in the | |
See Also |
| |
4546 |
ERROR: MAXINTERFACES parameter must be >= 0 and < 32767 | |
|
Description |
The |
Action |
Specify a value that is between 0 and 32766, inclusive. | |
See Also |
| |
4550 |
ERROR: FIELDTYPE parameter required for FACTORY ROUTING val | |
|
Description |
A entry in the |
Action |
Either change the | |
See Also |
| |
4551 |
ERROR: *ROUTING entry val FIELDTYPE does not match datatype of RANGES | |
|
Description |
A entry in the |
Action |
Correct the | |
See Also |
| |
4552 |
ERROR: *ROUTING entry val FIELDTYPE does not match datatype of RANGES | |
|
Description |
A entry in the |
Action |
Correct the | |
See Also |
| |
4553 |
ERROR: You do not have a valid SDK license | |
|
Description |
|
Action |
Buy a Oracle TUXEDO system SDK license. | |
4560 |
エラー: ライセンス・レベルを判定できません | |
|
説明 |
|
アクション |
有効なTUXEDOライセンス・ファイルを$TUXDIR/udataobjにインストールしてから、コマンドを実行してください。 | |
4561 |
エラー: トランザクションへのライセンスはありません | |
|
説明 |
|
アクション |
トランザクションのサポートを可能にする有効なTUXEDOライセンス・ファイルを$TUXDIR/udataobjにインストールしてから、コマンドを実行してください。 | |
4578 |
エラー: ライセンスのないシステム・バイナリです | |
|
説明 |
Oracle WLEシステム・インストールのファイルに、契約ユーザーの最大数などの必要なソフトウェア・ライセンス情報が含まれていません。インストール時にインストール・プログラムによってこの情報が要求されました。 |
アクション |
配布媒体で提供されたライセンス・トークンおよびシリアル番号を使用して、Oracle WLEシステム・ソフトウェアを再インストールしてください。最後にライセンス情報が処理されるため、インストール・プログラムを途中で終了しないようにしてください。 | |
4579 |
エラー: ライセンスのないシステム・バイナリです | |
|
説明 |
Oracle WLEシステム・インストールのファイルに、契約ユーザーの最大数などの必要なソフトウェア・ライセンス情報が含まれていません。インストール時にインストール・プログラムによってこの情報が要求されました。 |
アクション |
配布媒体で提供されたライセンス・トークンおよびシリアル番号を使用して、Oracle WLEシステム・ソフトウェアを再インストールしてください。最後にライセンス情報が処理されるため、インストール・プログラムを途中で終了しないようにしてください。 | |
4581 |
エラー: 期間切れのシステム・バイナリです | |
|
説明 |
使用しているOracle WLEシステム・ソフトウェアのコピーは評価版であり、有効期限が切れています。 |
アクション |
Oracle WLEシステムの使用を継続する場合は、製品提供元の業者に連絡してください。 | |
4582 |
エラー: 期間切れのシステム・バイナリです | |
|
説明 |
使用しているOracle WLEシステム・ソフトウェアのコピーは評価版であり、有効期限が切れています。 |
アクション |
Oracle WLEシステムの使用を継続する場合は、製品提供元の業者に連絡してください。 | |
4588 |
ERROR: Could not add field val to fielded buffer, Ferror32=error | |
|
Description |
The Event Broker was unable to add a field fieldname (e.g., TA_SUBSCRIPTION, TA_BLOB_TYPE, TA_BLOB_VALUE) to the event message. The FML32 error is printed as error. The event message will not be processed. |
Action |
See the log for other related errors. The log should also indicate the status of the message. | |
4589 |
ERROR: Could not delete field val from fielded buffer, Ferror32=val | |
|
Description |
The Event Broker was unable to delete a field fieldname (e.g., TA_SUBSCRIPTION, TA_BLOB_TYPE, TA_BLOB_VALUE) from the event message. The FML32 error is printed as error. Processing continues unaffected. |
Action |
No action is necessary. See the log for other related errors. | |
4590 |
ERROR: Cannot open file val for reading | |
|
Description |
The event server couldn't open file file for reading the subscription database. |
Action |
The event server reads a new copy of the subscription database from the temporary file file. This message indicates that the server couldn't open the temporary file for reading. Check the file system parameters and take corrective action. | |
4592 |
ERROR: TMSCOUNT parameter must be > 1 and <= 256 | |
|
Description |
The |
Action |
Specify a value that is between 2 and 256, inclusive. | |
See Also |
| |
4594 |
ERROR: Both Module path and argument list must be <= val characters each, in length | |
|
Description |
Either module path or the argument list (in |
Action |
Edit the | |
See Also |
| |
4595 |
ERROR: Duplicate *JDBCCONNPOOLS section | |
|
Description |
There are multiple JDBCCONNPOOLS sections defined in the |
Action |
Remove the extraneous JDBCCONNPOOLS section from the | |
See Also |
| |
4596 |
ERROR: *SERVERS section must appear before *JDBCCONNPOOLS section | |
|
Description |
The JDBCCONNPOOLS section was put before the SERVERS section in the |
Action |
Correct the | |
See Also |
| |
4597 |
ERROR: Name of *JDBCCONNPOOLS entry must be <= val characters in length | |
|
Description |
The |
Action |
Specify an JDBCCONNPOOLS entry name value that is less than or equal to 30 characters in length. | |
See Also |
| |
4598 |
ERROR: SRVGRP parameter missing in *JDBCCONNPOOLS entry name | |
|
Description |
An entry in the JDBCCONNPOOLS section entry (name) does not have
a |
Action |
Add a | |
See Also |
| |
4599 |
ERROR:SRVID parameter missing in *JDBCCONNPOOLS entry | |
|
Description |
An entry in the JDBCCONNPOOLS section does not have a |
Action |
Add a | |
See Also |
|
![]() |
![]() |
![]() |