コンテンツはここから始まります

システム・メッセージ: Qカタログ1200-1299

前 次

1205


ERROR: Invalid high threshold type

Description

While executing the qcreate or qchange command, an invalid upper threshold value was specified (the suffix was not valid). The threshold value must be a number suffixed with 'b', 'B', '%', or 'm'.

Action

Re-enter the qcreate or qchange command using an appropriate threshold value.

See Also

qmadmin(1)


1207


ERROR: Invalid high threshold number

Description

While executing the qcreate or qchange command, an upper threshold value of 0 was specified, or a percentage greater than 100 was given.

Action

Re-enter the qcreate or qchange command using an appropriate threshold value.

See Also

qmadmin(1)


1210


ERROR: High and low threshold types do not match

Description

While executing the qcreate or qchange command, the suffix on the upper threshold value doesn't match the suffix on the lower threshold value.

Action

Re-enter the qcreate or qchange command using appropriate threshold values.

See Also

qmadmin(1)


1212


ERROR: Low threshold must be less than high threshold

Description

While executing the qcreate or qchange command, the lower threshold value is larger than the upper threshold value.

Action

Re-enter the qcreate or qchange command using appropriate threshold values such that the lower value is less than the upper threshold value.

See Also

qmadmin(1)


1215


ERROR: Threshhold command length must be less than len characters

Description

While executing the qcreate or qchange command, the threshold command was too long (that is, len characters or more).

Action

Re-enter the command with a threshold command that is 128 characters or less in length.

See Also

qmadmin(1)


1216


ERROR: Queue creation failed for queue name

Description

While executing the qcreate command, qmadmin failed to create the specified queue. There are many possible reasons for the failure and the specific reason is written to the standard output or the userlog.

Action

Re-enter the command when the problem has been resolved.

See Also

qmadmin(1)


1221


WARN: Priority not changed

Description

While changing message priorities with the qchangeprio command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.

Action

No action required.

See Also

qmadmin(1)


1223


ERROR: Queue name length must be less than len characters

Description

While executing the qchangequeue command, the queue name was too long (that is, len characters or more).

Action

Re-enter the command with a queue name that is 15 characters or less in length.

See Also

qmadmin(1)


1224


ERROR: Queue name must be specified

Description

While executing the qdestroy command, the queue name was not entered at the prompt or an empty string was specified on the command line.

Action

Re-enter the qdestroy command specifying a valid queue name.

See Also

qmadmin(1)


1226


WARN: Queue not changed

Description

While changing the queue on which messages are queued with the qchangequeue command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.

Action

No action required.

See Also

qmadmin(1)


1228


ERROR: Invalid time format

Description

While executing the qchangetime command, an invalid date and time value was specified.

Action

Re-enter the qchangetime command using a valid date/time value. The value must be of the form YY[MM[DD[HH[MM[SS]]]]] (that is, 2 digits for year, and optionally 2 digits each for the month, date, hour, minute, and second), with an optional '+' prefix to indicate a relative value.

See Also

qmadmin(1)


1230


WARN: Time not changed

Description

While changing message execution time with the qchangetime command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.

Action

No action required.

See Also

qmadmin(1)


1232


WARN: Messages not deleted

Description

While deleting messages with the qdeletemsg command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.

Action

No action required.

See Also

qmadmin(1)


1233


ERROR: Cannot specify the -p and -f options together

Description

While executing the qdestroy command, both the -p and -f options were specified.

Action

Re-enter the qdestroy command with either the -p or -f option but not both.

See Also

qmadmin(1)


1234


ERROR: Cannot specify the -p and -f options together

Description

While executing the qdestroy command, both the -p and -f options were specified.

Action

Re-enter the qdestroy command with either the -p or -f option but not both.

See Also

qmadmin(1)


1237


WARN: Queue not destroyed

Description

While destroying a message queue with the qdestroy command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.

Action

No action required.

See Also

qmadmin(1)


1238


ERROR: Failed to destroy queue queue

Description

While executing the qdestroy command, qmadmin failed to destroy the specified queue, queue. There are many possible reasons for the failure and the specific reason is written to the standard output or the userlog.

Action

Re-enter the command when the problem has been resolved. If the command fails because other processes are attached to the queue space, the -f option can be specified to force destroying the queue. If the command fails because there are messages on the queue, the -p option can be specified to purge the queue and destroy it.

See Also

qmadmin(1)


1241


ERROR: Failed to open queue space queue_space_name on config config

Description

While executing the qopen command, qmadmin failed to open the specified queue space, queue_space_name, on the configuration device config. There are many possible reasons for the failure and the specific reason is written to the userlog.

Action

Check the userlog for the specific reason for failure. Re-enter the command when the problem has been resolved.

See Also

qmadmin(1)


1246


WARN: Transaction not aborted

Description

While heuristically aborting a transaction with the qaborttrans command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.

Action

No action required.

See Also

qmadmin(1)


1250


WARN: Transaction not committed

Description

While heuristically committing a transaction with the qcommittrans command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.

Action

No action required.

See Also

qmadmin(1)


1256


ERROR: Invalid time format

Description

While executing the qscan command, an invalid date and time value was specified.

Action

Re-enter the qscan command using a valid date/time value. The value must be of the form YY[MM[DD[HH[MM[SS]]]]] (that is, 2 digits for year, and optionally 2 digits each for the month, date, hour, minute, and second).

See Also

qmadmin(1)


1257


ERROR: Invalid time format

Description

While executing the qscan command with a range of date/time values, an invalid date and time value was specified for the second value.

Action

Re-enter the qscan command using a valid date/time value. The value must be of the form YY[MM[DD[HH[MM[SS]]]]] (that is, 2 digits for year, and optionally 2 digits each for the month, date, hour, minute, and second). A range of date/time values is two date/time values separated by a hyphen.

See Also

qmadmin(1)


1258


ERROR: Invalid priority

Description

While executing the qscan command, an invalid priority value was specified.

Action

Re-enter the qscan command using a valid priority value. The value must be numeric in the range 1-100, inclusive.

See Also

qmadmin(1)


1259


ERROR: Invalid priority

Description

While executing the qscan command, an invalid range of priority values was specified.

Action

Re-enter the qscan command using a valid priority value. A priority value must be numeric in the range 1-100, inclusive, and a range of priorities is two priority values separated by a hyphen.

See Also

qmadmin(1)


1260


ERROR: Invalid message id

Description

While executing the qscan command, an invalid message identifier value was specified.

Action

Re-enter the qscan command using a valid message identifier value. The value must be a string, less than 33 characters in length, with backslash and non-printable characters entered as a backslash followed by a two-character hexadecimal value for the character.

See Also

qmadmin(1)


1261


ERROR: Invalid correlation id

Description

While executing the qscan command, an invalid correlation identifier value was specified.

Action

Re-enter the qscan command using a valid correlation identifier value. The value must be a string, less than 33 characters in length, with backslash and non-printable characters entered as a backslash followed by a two-character hexadecimal value for the character.

See Also

qmadmin(1)


1262


ERROR: Queue name length must be less than len characters

Description

While executing the qset command, the queue name was too long (that is, len characters or more).

Action

Re-enter the command with a queue name that is 15 characters or less in length.

See Also

qmadmin(1)


1279


ERROR: Must specify queue space name

Description

While executing the qspacecreate command, the queue space name specified is the null string (that is, the name was entered on the command line as "", or return was entered for the prompt for the Queue Space Name).

Action

Re-enter the qspacecreate command with the correct queue space name.

See Also

qmadmin(1)


1280


ERROR: Queue space name length must be less than len characters

Description

While executing the qspacecreate command, the queue space name was too long (that is, len characters or more).

Action

Re-enter the command with a queue space name that is 15 characters or less in length.

See Also

qmadmin(1)


1282


ERROR: Queue name length must be less than length characters in old queue space

Description

For Oracle Tuxedo release older than 11gR1, the queue name must be less than length. The length queue name has increased to 127 from Oracle TUXEDO 11gR1 and above: however, it is not allowed to create, change queue with long names if the opened queue space is created by earlier Oracle TUXEDO releases.

Action

Correct the value of queue name with a name less than length and retry the action.

See Also

qmadmin(1)


1284


ERROR: Error queue name length must be less than length characters in old queue space

Description

For Oracle Tuxedo release older than 11gR1, the queue name must be less than length. The length queue name is enlared to 127 from TUXEDO 11gR1 and above, but it is not allowed to change error queue with long names if the opened queue space is created by earlier Oracle TUXEDO releases.

Action

Correct the value of error queue name with a name less than length and retry the action.

See Also

qmadmin(1)


1294


ERROR: Error queue name length must be less than len characters

Description

While executing the qspacecreate command, the error queue name was too long (that is, len characters or more).

Action

Re-enter the command with an error queue name that is 15 characters or less in length.

See Also

qmadmin(1)


1295


ERROR: Queue space creation failed

Description

While executing the qspacecreate command, qmadmin failed to create the specified queue space. There are many possible reasons for the failure and the specific reason is written to the standard output or the userlog.

Action

Re-enter the command when the problem has been resolved.

See Also

qmadmin(1)


1298


WARN: Queue space not destroyed

Description

While destroying a queue space with the qspacedestroy command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.

Action

No action required.

See Also

qmadmin(1)


 先頭に戻る 前 次