This appendix provides essential OAAM properties and enums.
OAAM properties are summarized in the following sections:
About Adding User Defined Enum Elements or Changing the Enabled Attribute of an Enum Element
Access Manager and Oracle Adaptive Access Manager Integration
The creation of any new user defined enum element or changing the enabled
attribute of an enum element from false
to true
will require a restart of the managed servers.
These properties and default values are used to create the Oracle Access Manager Client Object Pool. These parameters can be configured to higher values if the login volume is high.
Table C-1 Pool Configuration Properties
Properties | Description |
---|---|
oaam.oam.oamclient.minConInPool |
Defines the minimum number of OAP connections that OAAM will maintain in its pool. It is recommended to keep this value the same as Max Connections as oaam.uio.oam.num_of_connections. |
oaam.oam.oamclient.initDelayForWatcher |
Defines the initial delay (in milliseconds) before the OAAM Pool Watcher thread starts to check connections. |
oaam.oam.oamclient.periodForWatcher |
Defines the rest period (in milliseconds) for the OAAM Pool Watcher thread, a thread which periodically checks the health of connections in the pool. Keep this a low value, if connections can go bad frequently. |
oaam.oam.oamclient.timeout |
Period (in milliseconds) that a request will wait for an available OAP connection before timing out if no connections are available in the pool. Keep this value to a low number. |
oaam.uio.oam.num_of_connections |
Primary OAM Server Setting Defines the target (maximum) number of OAP connections to the primary OAM server that OAAM will maintain in its pool. Change default to sufficiently high number. |
oaam.uio.oam.secondary.host.num_of_connections |
Secondary OAM Server Setting (if used) Defines the target (maximum) number of OAP connections to the secondary OAM server that OAAM will maintain in its pool. Change default to sufficiently high number. |
Table C-2 Agent Case Properties
Properties | Description |
---|---|
Turns on/off user information for Agent case, which are not in the Escalated status. When an OAAM Agent Case is autogenerated from the Configurable Action, the User Details panel is populated with user details for the session for which the case was created. When manually creating a case and linking to a session, user details can be populated. As a result, subsequent searches of cases by Username or User ID can locate manually created cases. The Agent case creation page can optionally accept entry of a valid Username and/or User ID if the |
|
customercare Changes the landing page to either Cases, Sessions or Search Transactions. |
|
sessions Changes the landing page to either Cases, Sessions or Search Transactions. |
|
transactionlogs Changes the landing page to either Cases, Sessions or Search Transactions. |
Table C-3 Autolearning Properties
Table C-4 Configuration Action Properties
Properties | Description |
---|---|
Sets the Secure Only flag on any cookies set by OAAM applications directly (does not apply to JSESSIONID). It will mainly apply to the VSC cookie |
Table C-6 Customer Care Properties
Property | Description |
---|---|
Prints out every SQL if the property is set to zero. |
|
oracle.oaam.allentitycache.lifetime.min |
5 This property should not be changed. |
oracle.oaam.allentitycache.monitor.sec |
30 This property should not be changed. |
oracle.oaam.autolearning.allentities.counts.cache.enabled |
true This property should not be changed. |
Table C-8 lists properties to enable device registration for all applications on the server. To enable on a application specific basis, "default" can be replaced with the appropriate appId
in each of the prior property names.
Table C-8 Device Registration Properties
Properties | Description |
---|---|
Enables device registration. Adds text and a check box to the bottom of the challenge page if the property is set to true. When a user is challenged, the check box and text would allow him to register the current device (if it is not already registered). If the device is already registered for that user, the option will not appear unless the user unregisters the device in user preferences. |
|
bharosa.uio.default.register.questions.registerdevice.enabled |
true Adds device registration to the challenge question registration page. |
bharosa.uio.default.register.userinfo.registerdevice.enabled |
true Adds device registration to the Contact Information registration page. |
Enables user to be able to unregister current device in user preferences. |
|
Enables user to be able to unregister all devices in user preferences |
|
Enables device registration in native integration if property is set to true so that data can be captured. |
Table C-9 Digital Fingerprint Properties
Properties | Description |
---|---|
Enables use of custom digital fingerprints if you set this property to the type of digital fingerprint you want to capture. For Instance, bharosa.uio.default.device.identification.scheme=applet Note: Flash is set to be the default digital fingerprint in OAAM. |
Table C-10 Encrypted Data Masking Properties
Properties | Description |
---|---|
Shows the number of characters unmasked. The default length is 3. |
|
Shows mask characters to represent encrypted transaction data. For example, set the property to ******** |
|
Set to true to enables masking of encrypted transaction data globally. |
|
Permissions to enable/disable masking at role level. |
Table C-11 Encryption Properties
Table C-12 Entity and Transaction Properties
Properties | Description |
---|---|
admin.group.userid.maxlength |
Allows you to increase the maximum length to enter for Login IDs. Default is 255. |
admin.group.name.maxlength 255 |
Allows you to increase the maximum length to enter for User IDs. Default is 255. |
admin.group.genstring.maxlength |
Allows you to increase the maximum length for Gen String fields. |
Table C-15 Integration Properties
Properties | Description |
---|---|
Disables the Step-up use case in Access Manager-OAAM TAP integration, you must set the property to false. |
|
oaam.server.integration.app_id.param |
Configures the HTTP request parameter key that the integration processor will use to try to read AppId from when entering OAAM entry point |
Table C-16 Investigation Properties
Table C-19 Offline Scheduler Properties
Properties | Description |
---|---|
Enables/disables scheduler so that jobs are run. By default, the property is set to false. Jobs can be created, but they will not run until the property is changed to true. |
|
bharosa.ra.loadrun.resetbeforerun |
Performing a Load and Run job multiple times appends rule data to existing sessions, resulting in duplicate checkpoints for each time the job is performed. If you want old checkpoint data to be erased before checkpoint rules are run, ensure that |
oaam.admin.detail.mobile.enabled=true |
By default, the Client-Application and Latitude and Longitude attributes are not displayed in the Session Details page in the OAAM Offline whereas they are displayed in the same page in OAAM Admin. To display these attributes in the Session Details page, add the oaam.admin.detail.mobile.enabled=true property to the oaam_admin.properties file of the offline server |
Properties | Description |
---|---|
UMS Server Web service URL |
|
UMS Server ParlayX Endpoint URL |
|
False Configures the use of web service or parlayx API. The value is false by default (Web services recommended). |
|
User name for UMS server |
|
Password for UMS server |
|
UMS authentication policies |
|
demo@example.com OAAM from address for OTP messages. |
|
bharosa.uio.default.ums.integration.message.status.poll.attempts |
3 Number of times to attempt status poll each time the wait page is displayed. |
bharosa.uio.default.ums.integration.message.status.poll.delay |
1000 Delay between status polls while the wait page is being displayed |
bharosa.uio.default.ums.integration.sleepInterval |
10000 |
3000 |
|
2 SMS Challenge enum value |
|
SMS Challenge Name of SMS challenge type |
|
bharosa.uio.default.challenge.type.enum.ChallengeSMS.description |
SMS Challenge Description of SMS challenge type |
bharosa.uio.default.challenge.type.enum.ChallengeSMS.processor |
com.bharosa.uio.processor.challenge.SMSUMSOTPChallengeProcessor Processor class for SMS challenge type Specifies the java class for handling challenges of this type. The challenge mechanism is customizable through Java classes. See the Oracle Fusion Middleware Developer's Guide for Oracle Adaptive Access Manager for information. |
bharosa.uio.default.challenge.type.enum.ChallengeSMS.requiredInfo |
mobile Required fields to challenge user with SMS challenge type A comma separated list of inputs from registration input enum |
bharosa.uio.default.challenge.type.enum.ChallengeSMS.available |
Makes available the SMS challenge type Specifies if the challenge type is available for use (service ready and configured). To enable/disable an OTP challenge type, the available flag should be set. |
true OTP property for SMS challenge type |
|
1 Email Challenge enum value |
|
Email Challenge Name of e-mail challenge type |
|
bharosa.uio.default.challenge.type.enum.ChallengeEmail.description |
Email Challenge Description of e-mail challenge type |
bharosa.uio.default.challenge.type.enum.ChallengeEmail.processor |
com.bharosa.uio.processor.challenge.EmailUMSOTPChallengeProcessor Processor class for e-mail challenge type Specifies the java class for handling challenges of this type. The challenge mechanism is customizable through Java classes. See the Oracle Fusion Middleware Developer's Guide for Oracle Adaptive Access Manager for information. |
bharosa.uio.default.challenge.type.enum.ChallengeEmail.requiredInfo |
Required fields to challenge user with e-mail challenge type A comma separated list of inputs from registration input enum |
bharosa.uio.default.challenge.type.enum.ChallengeEmail.available |
false Makes available the e-mail challenge type Specifies if the challenge type is available for use (service ready and configured). To enable/disable an OTP challenge type, the available flag should be set. |
true OTP property for e-mail challenge type |
|
4 Terms and Conditions enum value |
|
Terms and Conditions Name for Terms and Conditions check box |
|
Terms and Conditions Description for Terms and Conditions check box |
|
terms HTML input name for Terms and Conditions check box |
|
checkbox HTML input type for Terms and Conditions check box |
|
true Required values for Term and Conditions check box during registration and user preferences |
|
40 HTML input max length for Terms and Conditions check box |
|
true Required flag for Term and Conditions check box during registration and user preferences |
|
5 Order on the page for Terms and Conditions check box |
|
true Enabled flag for Terms and Conditions enum item |
|
.+ Regular expression for validation of Terms and Conditions check box |
|
otp.invalid.terms Error code to obtain error message from if validation of Terms and Conditions fails |
|
com.bharosa.uio.manager.user.DefaultContactInfoManager Java class to use to save / retrieve Terms and Conditions from data storage |
|
0 Mobile phone enum value |
|
Mobile Phone Name for mobile phone field |
|
Mobile Phone Description for mobile phone field |
|
cell number HTML input name for mobile phone field |
|
text HTML input type for mobile phone field |
|
15 HTML input max length for mobile phone field |
|
true Required flag for mobile phone field during registration and user preferences |
|
bharosa.uio.default.userinfo.inputs.enum.mobile.order |
1 Order on the page for mobile phone field |
true Enabled flag for mobile phone enum item |
|
If configuring through properties: \\D?(\\d{3})\\D?\\D?(\\d{3})\\D?(\\d{4}) If configuring through OAAM Admin: \D?(\d{3})\D?\D?(\d{3})\D?(\d{4}) |
|
otp.invalid.mobile Error code to obtain error message from if validation of mobile phone entry fails |
|
bharosa.uio.default.userinfo.inputs.enum.mobile.managerClass |
com.bharosa.uio.manager.user.DefaultContactInfoManager Java class to use to save / retrieve mobile phone from data storage |
2 Mobile phone enum value |
|
Mobile Phone 2 Name for mobile phone field |
|
bharosa.uio.default.userinfo.inputs.enum.mobile2.description |
Mobile Phone 2 Description for mobile phone field |
cell number 2 HTML input name for mobile phone field |
|
text HTML input type for mobile phone field |
|
15 HTML input max length for mobile phone field |
|
true Required flag for mobile phone field during registration and user preferences |
|
2 Order on the page for mobile phone field |
|
true Enabled flag for mobile phone enum item |
|
If configuring through properties: \\D?(\\d{3})\\D?\\D?(\\d{3})\\D?(\\d{4}) If configuring through OAAM Admin: \D?(\d{3})\D?\D?(\d{3})\D?(\d{4}) Regular expression for validation of mobile phone field |
|
otp.invalid.mobile Error code to obtain error message from if validation of mobile phone entry fails |
|
bharosa.uio.default.userinfo.inputs.enum.mobile2.managerClass |
com.bharosa.uio.manager.user.DefaultContactInfoManager Java class to use to save / retrieve mobile phone from data storage |
1 Email address enum value |
|
Email Address Name for email address field |
|
Email Address Description for email address field |
|
HTML input name for email address field |
|
text HTML input type for email address field |
|
40 HTML input max length for email address field |
|
true Required flag for email address field during registration and user preferences |
|
2 Order on the page for email address field |
|
false Enabled flag for email address enum item |
|
Regular expression for validation of email address field If configuring through properties: .+@[a-zA-Z_]+?\\.[a-zA-Z]{2,3} If configuring through OAAM Admin: .+@[a-zA-Z_]+?\.[a-zA-Z]{2,3} |
|
otp.invalid.email Error code to obtain error message from if validation of email address entry fails |
|
com.bharosa.uio.manager.user.DefaultContactInfoManager Java class to use to save / retrieve email address from data storage |
|
bharosa.uio.default.userinfo.inputs.enum.email2 |
2 Email address enum value |
Email Address 2 Name for email address field |
|
Email Address 2 Description for email address field |
|
email2 HTML input name for email address field |
|
text HTML input type for email address field |
|
40 HTML input max length for email address field |
|
true Required flag for email address field during registration and user preferences |
|
2 Order on the page for email address field |
|
false Enabled flag for email address enum item |
|
.+@[a-zA-Z_]+?\\.[a-zA-Z]{2,3} Regular expression for validation of email address field |
|
otp.invalid.email Error code to obtain error message from if validation of email address entry fails |
|
bharosa.uio.default.userinfo.inputs.enum.email2.managerClass |
com.bharosa.uio.manager.user.DefaultContactInfoManager Java class to use to save / retrieve email address from data storage |
Enables/disables the profile registration pages if the OTP channel is enabled and requires registration. |
|
Enables/disables the ability to set preferences if the OTP channel is enabled and allows preference setting. User Preferences is a page that allows the user to change their image/phrase, challenge questions, un-register devices, and update their OTP profile. |
|
bharosa.uio.default.challenge.type.enum.ChallengeSMS.available |
Enables the Short Message Service (SMS) Challenge Type. This makes it possible for the policies to challenge using OTP via SMS. |
Terms and Conditions |
|
PLACEHOLDER TEXT FOR TERMS AND CONDITIONS |
|
Privacy Policy |
|
PLACEHOLDER TEXT FOR PRIVACY POLICY |
Table C-21 Performance Properties
Properties | Description |
---|---|
bharosa.trackernodehistory.enable |
If the history of the device is not required, then device history logging can be turned OFF by setting the property bharosa.trackernodehistory.enable to false |
Controls threshold and logging for rules. By default, the Session Details page does not display the trigger sources if the execution time for alerts is less than 2000 millisecond (2000 ms) since detailed logging is dependent on the execution time. Set this property to 2000. |
|
tracker.wf.createHourlyEntries tracker.wf.createDailyEntries |
The Auto-learning feature tracks transactions and authentications being performed by different actors based on patterns you create. This process establishes what is "normal" or average behavior for an individual or a population. By default, Auto-learning collects data for hourly, daily granularity that is not used by the out-of-the-box patterns. If there are no custom patterns that use hourly, daily granular data, then that data collection can be disabled by setting the properties to false. Note: When auto-learning is disabled, no pattern-based risk analysis will be performed. Consider this before you disable auto-learning as the risk analysis may be an important part of your data collection. |
vcrypt.tracker.soap.url |
To reduce DNS resolution issues, specify the IP Address of the Oracle Adaptive Access Manager Server where SOAP services are hosted as the value of Oracle Adaptive Access Manager Host in vcrypt.tracker.soap.url property. |
Table C-22 Policies, Rules, and Condition Properties
Properties | Description |
---|---|
Specifies the checkpoint in which to log the rules. Make sure that "vcrypt.tracker.rules.trace.policySet.XXXXXX" is set to |
|
Enables/disables the Action Override feature. This feature is turned off by default. |
Properties | Description |
---|---|
vcrypt.tracker.ip.detectProxiedIP bharosa.ip.header.name |
Enables use of the "X-Forwarded-For" IP, set this property to true. OAAM does not use the header IP by default. When using OAAM with LBR and SNAT enabled, the client IP address needs to be preserved. This is critical since OAAM relies on the client IP Address when evaluating policies. Make sure the following OAAM properties are set as follows: vcrypt.tracker.ip.detectProxiedIP=true bharosa.ip.header.name=X-Forwarded-For For information on load balancers preserving the Client IP Addresses, see the "Preparing the Network for an Enterprise Deployment" chapter in Oracle Fusion Middleware Enterprise Deployment Guide for Oracle Identity Management. |
Indicates that the application is not protected by the OAAM proxy solution and that OAAM server should not proxy requests for UIO to the OAAM admin system. Set it to true for proxy mode. OAAM Server is configured to be in non-proxy mode with the flag set to false by default. |
Table C-25 SOAP Web Service Access Properties
The account statuses are globalized values. The base definitions are in oaam_core.properties
, but the names and descriptions are used from oaam_resources.properties
. Overriding the strings would require adding values to a client_resource_
locale
.properties
file in the OAAM Extensions war file.
Properties | Description |
---|---|
Pending Activation The user started registration, but has not completed it. He has entered his user name and password and his information has been stored in the database, but he will not be activated until he has completed registration. The user is available in the system, but he is not yet active and cannot perform any operations. |
|
Active The user is active and available in the system. He has completed registration and can perform all operations. |
|
Disabled The user is available in the system, but not active. He maybe disabled because of fraud or other reasons and cannot perform any operations. |
|
Deleted The user is not available in the system. |
|
Invalid The user name is not valid. |
The authentication statuses are globalized values. The base definitions are in oaam_core.properties
, but the names and descriptions are used from oaam_resources.properties
. Overriding the strings would require adding values to a client_resource_
locale
.properties
file in the OAAM Extensions war file.
Table C-27 Authentication Status
Properties | Description |
---|---|
Success The user is successfully authenticated. |
|
Invalid user The user name was invalid and not available in the system. |
|
Wrong password The user entered the wrong password. The user name was entered correctly, but the password was incorrect. |
|
Wrong PIN If user has PIN as a password and it was entered incorrectly. |
|
Session expired The user logged in to the application then left it inactive for a length of time. When the user tries to use the application again, a message appears telling him the session has expired. The user will have to log in again. |
|
Session reused When the session had expired and the user logged in successfully, the status changes from session expired to session reused. |
|
User disabled The user was available in the system, but had been disabled in the system for a variety of reasons. The user name is valid, but he has been disabled. |
|
Pending activation The user has not completed the registration yet. |
|
Wrong Answer The user entered the wrong answer to a challenge question. |
|
Database Error When user was performing a database operation, he encountered an error. |
|
System Error When user was using the application, he encountered an error. |
|
Blocked If a user is "Blocked," it is because a policy has found certain conditions to be "true" and is set up to respond to these conditions with a "Block Action." If those conditions change, the user may no longer be "Blocked." The "Blocked" status is not necessarily permanent and therefore may or may not require an administrator action to resolve. For example, if the user was blocked because he was logging in from a blocked country, but he is no longer in that country, he may no longer be "Blocked." |
|
Locked "Locked" is the status that Oracle Adaptive Access Manager sets if the user fails a challenge. If the user exceeds the number of retries when attempting to provide a correct answer, then his account becomes "Locked." After that, a Customer Service Representative must reset the status to "Unlocked" before the user can use the account to enter the system. |
|
Pending The user has logged into the application, completed registration, but the he did not go through the entire flow. |
|
auth.status.enum.expired_password.name |
Password Expired The user's password has expired. |
Table C-28 Timezones Properties
Properties | Description |
---|---|
oaam.adf.timezone |
To set the time zone that will be used for all timestamps in the user interface, use the Property Editor to set For example,
The time zones are as follows: Pacific/Midway (GMT-11:00) Midway - Samoa Time (ST) Pacific/Pago_Pago (GMT-11:00) Pago Pago - Samoa Time (ST) Pacific/Honolulu (GMT-10:00) Honolulu - Hawaii Time (HT) Pacific/Fiji (GMT+12:00) Fiji - Fiji Time (FJT) |
oaam.adf.timezone |
America/Anchorage (GMT-09:00) Alaska Time (AKT) America/Tijuana (GMT-08:00) Tijuana - Pacific Time (PT) America/Vancouver (GMT-08:00) Vancouver - Pacific Time (Canada) (PT) America/Los_Angeles (GMT-08:00) Los Angeles - Pacific Time (PT) America/Chihuahua (GMT-07:00) Chihuahua - Mexico Time 2 (MT) America/Denver (GMT-07:00) Denver - Mountain Time (MT) America/Edmonton (GMT-07:00) Mountain Time Canada (MT) America/Panama (GMT-05:00) Panama - Eastern Time (ET) America/Montreal (GMT-05:00) Montreal - Eastern Time (Canada) (ET) America/New_York (GMT-05:00) New York - Eastern Time (ET) America/Puerto_Rico (GMT-04:00) Puerto Rico - Atlantic Time (AT) America/Halifax (GMT-04:00) Canada Atlantic Time (AT) America/Santiago (GMT-04:00) Santiago - Chile Time (CLT) America/Caracas (GMT-04:00) Caracas - Venezuela Time (VET) America/Godthab (GMT-03:00) Godthab - Western Greenland Time (WGT) America/Argentina/Buenos_Aires (GMT-03:00) Buenos Aires - Argentine Time (ART) America/Sao_Paulo (GMT-03:00) Sao Paulo - Brasilia Time (BRT) America/St_Johns (GMT-03:30) St Johns - Newfoundland Time (NT) America/Noronha (GMT-02:00) Noronha - Fernando de Noronha Time (FNT) Atlantic/Azores (GMT-01:00) Azores - Azores Time (AZOT) Atlantic/Cape_Verde (GMT-01:00) Cape Verde - Cape Verde Time (CVT) |
oaam.adf.timezone |
Europe/Dublin (GMT+00:00) Dublin - Greenwich Mean Time (GMT) Europe/London (GMT+00:00) London - Greenwich Mean Time (GMT) Etc/UTC (GMT+00:00) Coordinated Universal Time (UTC) Africa/Casablanca (GMT+00:00) Casablanca - Western European Time (WET) Europe/Lisbon (GMT+00:00) Lisbon - Western European Time (WET) Africa/Nouakchott (GMT+00:00) Nouakchott - Greenwich Mean Time (GMT) Atlantic/Reykjavik (GMT+00:00) Reykjavik - Greenwich Mean Time (GMT) Europe/Prague (GMT+01:00) Prague - Central European Time (CET) Europe/Budapest (GMT+01:00) Budapest - Central European Time (CET) Europe/Madrid (GMT+01:00) Madrid - Central European Time (CET) Europe/Vienna (GMT+01:00) Vienna - Central European Time (CET) Africa/Algiers (GMT+01:00) Algiers - Central European Time (CET) Africa/Lagos (GMT+01:00) Lagos - Western African Time (WAT) Europe/Belgrade (GMT+01:00) Belgrade - Central European Time (CET) Europe/Oslo (GMT+01:00) Oslo - Central European Time (CET) Europe/Rome (GMT+01:00) Rome - Central European Time (CET) Africa/Tunis (GMT+01:00) Tunis - Central European Time (CET) Europe/Stockholm (GMT+01:00) Stockholm - Central European Time (CET) Europe/Copenhagen (GMT+01:00) Copenhagen - Central European Time (CET) Europe/Tirane (GMT+01:00) Tirane - Central European Time (CET) Europe/Zurich (GMT+01:00) Zurich - Central European Time (CET) Europe/Paris (GMT+01:00) Paris - Central European Time (CET) Europe/Berlin (GMT+01:00) Berlin - Central European Time (CET) Europe/Warsaw (GMT+01:00) Warsaw - Central European Time (CET) Europe/Amsterdam (GMT+01:00) Amsterdam - Central European Time (CET) Europe/Brussels (GMT+01:00) Brussels - Central European Time (CET) Europe/Luxembourg (GMT+01:00) Luxembourg - Central European Time (CET) Europe/Bucharest (GMT+02:00) Bucharest - Eastern European Time (EET) |
oaam.adf.timezone |
Asia/Nicosia (GMT+02:00) Nicosia - Eastern European Time (EET) Europe/Kiev (GMT+02:00) Kiev - Eastern European Time (EET) Europe/Sofia (GMT+02:00) Sofia - Eastern European Time (EET) Europe/Riga (GMT+02:00) Riga - Eastern European Time (EET) Africa/Johannesburg (GMT+02:00) Johannesburg - South Africa Time (SAT) Europe/Athens (GMT+02:00) Athens - Eastern European Time (EET) Africa/Tripoli (GMT+02:00) Tripoli - Eastern European Time (EET) Africa/Cairo (GMT+02:00) Cairo - Egypt Time (ET) Asia/Beirut (GMT+02:00) Beirut - Eastern European Time (EET) Europe/Tallinn (GMT+02:00) Tallinn - Eastern European Time (EET) Europe/Vilnius (GMT+02:00) Vilnius - Eastern European Time (EET) Europe/Helsinki (GMT+02:00) Helsinki - Eastern European Time (EET) Asia/Amman (GMT+02:00) Amman - Eastern European Time (EET) Asia/Damascus (GMT+02:00) Damascus - Eastern European Time (EET) Africa/Harare (GMT+02:00) Harare - Central African Time (CAT) Asia/Jerusalem (GMT+02:00) Jerusalem - Israel Time (IT) Europe/Istanbul (GMT+02:00) Istanbul - Eastern European Time (EET) Africa/Khartoum (GMT+03:00) Khartoum - Eastern African Time (EAT) Asia/Aden (GMT+03:00) Aden - Arabia Time (AT) Africa/Mogadishu (GMT+03:00) Mogadishu - Eastern African Time (EAT) Asia/Baghdad (GMT+03:00) Baghdad - Arabia Time (AT) Asia/Bahrain (GMT+03:00) Bahrain - Arabia Time (AT) Africa/Djibouti (GMT+03:00) Djibouti - Eastern African Time (EAT) Africa/Nairobi (GMT+03:00) Nairobi - Eastern African Time (EAT) Europe/Moscow (GMT+03:00) Moscow - Moscow Time (MSK) |
oaam.adf.timezone |
Europe/Moscow (GMT+03:00) Moscow - Moscow Time (MSK) Asia/Qatar (GMT+03:00) Qatar - Arabia Time (AT) Asia/Kuwait (GMT+03:00) Kuwait - Arabia Time (AT) Asia/Riyadh (GMT+03:00) Riyadh - Arabia Time (AT) Asia/Tehran (GMT+03:30) Tehran - Iran Time (IRT) Asia/Dubai (GMT+04:00) Dubai - Gulf Time (GT) Asia/Baku (GMT+04:00) Baku - Azerbaijan Time (AZT) Asia/Muscat (GMT+04:00) Muscat - Gulf Time (GT) Asia/Kabul (GMT+04:30) Kabul - Afghanistan Time (AFT) Asia/Yekaterinburg (GMT+05:00) Yekaterinburg - Yekaterinburg Time (YEKT) Asia/Karachi (GMT+05:00) Karachi - Pakistan Time (PKT) Asia/Tashkent (GMT+05:00) Tashkent - Uzbekistan Time (UZT) Asia/Kolkata (GMT+05:30) Kolkata - India Time (IT) Asia/Colombo (GMT+05:30) Colombo - Sri Lanka Time (LKT) Asia/Katmandu (GMT+05:45) Katmandu - Nepal Time (NPT) Asia/Dhaka (GMT+06:00) Dhaka - Bangladesh Time (BDT) Asia/Almaty (GMT+06:00) Almaty - Alma-Ata Time (ALMT) Asia/Novosibirsk (GMT+06:00) Novosibirsk - Novosibirsk Time (NOVT) Asia/Rangoon (GMT+06:30) Rangoon - Myanmar Time (MMT) Asia/Krasnoyarsk (GMT+07:00) Krasnoyarsk - Krasnoyarsk Time (KRAT) Asia/Ho_Chi_Minh (GMT+07:00) Ho Chi Minh - Indochina Time (ICT) Asia/Jakarta (GMT+07:00) Jakarta - West Indonesia Time (WIT) Asia/Bangkok (GMT+07:00) Bangkok - Indochina Time (ICT) Asia/Kuala_Lumpur (GMT+08:00) Kuala Lumpur - Malaysia Time (MYT) |
oaam.adf.timezone |
Asia/Kuala_Lumpur (GMT+08:00) Kuala Lumpur - Malaysia Time (MYT) Asia/Shanghai (GMT+08:00) Shanghai - China Time (CT) Asia/Taipei (GMT+08:00) Taipei - China Time (CT) Asia/Irkutsk (GMT+08:00) Irkutsk - Irkutsk Time (IRKT) Asia/Singapore (GMT+08:00) Singapore - Singapore Time (SGT) Asia/Hong_Kong (GMT+08:00) Hong Kong - Hong Kong Time (HKT) Asia/Manila (GMT+08:00) Manila - Philippines Time (PHT) Australia/Perth (GMT+08:00) Perth - Western Time (Australia) (WT) Asia/Yakutsk (GMT+09:00) Yakutsk - Yakutsk Time (YAKT) Asia/Tokyo (GMT+09:00) Tokyo - Japan Time (JT) Asia/Seoul (GMT+09:00) Seoul - Korea Time (KT) Australia/Adelaide (GMT+09:30) Adelaide - Central Time (South Australia) (CT) Australia/Darwin (GMT+09:30) Darwin - Central Time (Northern Territory) (CT) Asia/Vladivostok (GMT+10:00) Vladivostok - Vladivostok Time (VLAT) Pacific/Guam (GMT+10:00) Guam - Chamorro Time (ChT) Australia/Hobart (GMT+10:00) Hobart - Eastern Time (Tasmania) (ET) Australia/Sydney (GMT+10:00) Sydney - Eastern Time (New South Wales) (ET) Australia/Brisbane (GMT+10:00) Brisbane - Eastern Time (Queensland) (ET) Asia/Magadan (GMT+11:00) Magadan - Magadan Time (MAGT) Pacific/Auckland (GMT+12:00) Auckland - New Zealand Time (NZT) Pacific/Fiji (GMT+12:00) Fiji - Fiji Time (FJT) Asia/Kamchatka (GMT+12:00) Kamchatka - Petropavlovsk-Kamchatski Time (PETT) Etc/GMT-12 (GMT+12:00) Dateline Standard Time (UTC+12:00) Pacific/Tongatapu (GMT+13:00) Tongatapu - Tonga Time (TOT) |
Table C-29 User Interface Properties
Properties | Description |
---|---|
Specifies the user name to be in lowercase if set to false By default this property is set to true. When it is set to true, the user name is always in lower case. If it is set to false, the user name is taken as is. For example:
If property is true (default), all of these are the same user and will appear in the OAAM Administration Console as "myusername". If property is false, all of these are different users and will appear in the OAAM Administration Console as entered. |
|
Limits the maximum row selection for exporting a report of the results to Microsoft Excel. Reports are the results from the Search pages for policies, questions, validations, snapshots, properties, entities, transactions, conditions, groups, patterns, and so on. |
|
Search screen default time range. |
|
Session screen default time range. |
|
oaam.alerts.max.rows.display |
Limits the number of alerts to display in the Transaction and Alert pop-ups for viewing alert messages through the "..." or "more..." option in the Linked Sessions tab of the Agent case and the Search Sessions screens. The other screens that show alerts are the Session tab for the Detail screens (User, Device, Fingerprint, IP, Country, State, City), Transaction Search, and Session Details pages. The maximum limit is currently set to five alerts in the pop-up. |
oracle.oaam.db.query.maxrows |
Allows you to set a limit to the number of result rows. The default value for this parameter is 0. This value should never be set to be smaller than 100 or smaller than the number of members in your largest group with a full cache policy. |
Table C-30 Virtual Authentication Device Properties