Oracle^® Advanced Support Gateway Installation Guide

Scenario 2 Deployment Requirements

Make sure you meet the following requirements for successfully deploying the gateway in this scenario:

1. Import the gateway image to the customer tenant using the instructions provided below.
2. Allocate a new compartment for Oracle shared services (if this step is not already completed.)
3. Create a new subnet in the shared services VCN where the gateway will reside (/29 will suffice.)
4. Place customer assets in other subnets on the shared services VCN and/or in the customer 's own VCN.
5. Configure the customer VCN to allow traffic to the specified addresses by generating a security list based on the firewall requirements listed in Oracle Advanced Support Gateway Security Guide.
6. Set up an internet gateway or NAT gateway to allow traffic to the internet on the customer VCN.

   ---

   Note -  If you opt to use a NAT gateway, Oracle assumes that the customer is responsible for building and activating the gateway up to the point when SSLVPN is connected.

   ---

7. Generate a route table incorporating rules pointing the required traffic to the internet on the customer VCN.
8. (Optional) Set up a local peering gateway and establish a peering connection if the customer has assets in their own VCN.