| StorageTek Automated Cartridge System Library Software Quick Reference Release 8.3 E48582-02 |
|
 Previous |
| StorageTek Automated Cartridge System Library Software Quick Reference Release 8.3 E48582-02 |
|
Previous |
Throughout this quick reference, underlines show valid command and keyword abbreviations. For example, aud is an abbreviation of the audit command. Brackets [] enclose optional parameters. A vertical bar ( | ) separates parameter choices.
The acsss command is used to start, stop, and monitor the status of the various services associated with ACSLS.
acsss enable
This is the default method to bring up ACSLS. It checks for dependencies and activates, in the proper order, the five ACSLS services and the ACSLS GUI. When this method is used, the services are configured to restart automatically after a system reboot.
acsss temp-enable
Same as acsss enable but services are not restarted after a system reboot.
acsss maint-enable
Intended for general maintenance operations not involving the ACSLS database. This option enables the GUI infrastructure allowing GUI users to remain logged in while ACSLS is disabled. This method is used in contexts of minor software patch installations. Neither the acsls nor the smce service is enable.
acsss disable
This is the default method used to halt ACSLS operation. It is not a complete shutdown and allows for the database and any GUI login sessions to remain active for maintenance operations after the acsls and smce services have been disabled. The resulting state is identical to that of acsss maint-enable. This is the safest method to bring down the server since ACSLS and the library are placed in an idle state before the services are disabled.
acsss force-disable
Same as acsss disable but the operation does not wait for an idle state before disabling acsls and smce.
acsss shutdown
This renders a complete shutdown of all ACSLS services. It is intended for contexts of software installation and de-installation, and other maintenance contexts that require the database (acsdb) or the GUI infrastructure (rmi-registry and surrogate) to be shutdown.
acsss db
This is the preferred control mode to use for database maintenance operations including db_export, db_import, and acsss_config. It enables the ACSLS database engine and disables all other ACSLS services including the ACSLS GUI.
acsss status
Provides a quick status report of the various ACSLS services.
acsss a-status
Returns the operational status of the acsdb service.
acsss d-status
Returns the operational status of the acsls service.
acsss g-status
This option displays the status of the ACSLS GUI.
acsss l-status
Provides a verbose status summary of the various ACSLS services and includes pointers to log data for further analysis in troubleshooting contexts. The logs to which it points are helpful in contexts where the service failed to start up or shutdown.
acsss p-status
Similar to acsss status, this report includes a listing of the various process IDs that are monitored by each respective service contract.
acsss w-status
Shows the status of the weblogic service.
timeout
Updates the SMF start-up timeout for acsls.
acsss legal
This option displays the ACSLS Legal Notice in English or French.
Each command identifier corresponds to a type and consists of one or more components separated by commas.
acs_id
acs(0-31)
cap_id
acs(0-31),lsm(0-99),cap(0-11)
An asterisk (*) in a cap_id does the following:
acs,lsm,* — causes ACSLS to select the highest priority available CAP in the LSM.
acs,* — causes ACSLS to select the highest priority available CAP in the ACS
* — for an enter request causes ACSLS to select the CAP in the ACS with the most free cells.
* — for an eject request causes ACSLS to select the highest priority CAP in each ACS with a volume designated for ejection.
cell_id
acs(0-31),lsm(0-99),panel(0-50),row(0-41),column(0-23)
drive_id
acs(0-31),lsm(0-99),panel(0-50),drive(0-31)
drive_type
Up to 10 characters drive type identifier; can be any combination of numbers (0-9) or letters (A-Z).
lock_id
decimal number (0-32767)
lsm_id
acs(0-31),lsm(0-99)
media_type
Up to 10 characters media type identifier; can be any combination of numbers (0-9) or letters (A-Z). Spaces are not allowed. A common media type is the STK1R.
owner_id
volume owner
panel_id
acs(0-31),lsm(0-99),panel(0-50)
pool_id
decimal number (0-65535) Specifying an asterisk (*) for the pool_id reassigns a volume to its current pool_id
port_id
acs(0-31),port(0-15)
request_id
unique decimal number (0-65535) assigned by the ACSLS.
subpanel_id
acs(0-31),lsm(0-99),panel(0-50),startrow(0-41),startcolumn(0-23),endrow(0-41),endcolumn(0-23)
vol_id
Six-character identifier consisting of any combination of numbers (0-9), letters (A-Z, a-z, or mixed case (except for use in volrpt)), dollar sign ($), pound sign (#), and leading and/or trailing spaces ( ). Use single or double quotes to enclose vol_ids with leading or trailing spaces. Do not specify vol_ids with embedded spaces.
volrange
Specifies an ascending range of volumes separated by a dash.
For volranges in query, enter, and eject commands:
If it is a numeric range, specify only the right most numeric portions of the vol_ids as the range. All preceding characters must be identical. The display commands support full alphanumeric volranges and allow wildcards '*' and '_'.
audit cap_id server
Audits the entire library; updates library configuration
audit cap_id acs acs_id
Audits an ACS
audit cap_id lsm lsm_id
Audits an LSM
audit cap_id panel panel_id
Audits an LSM panel
audit cap_id subpanel subpanel_id
Audits an LSM subpanel
acsss_config
Runs the configuration script
dv_print
Displays values of dynamic options
dv_config -s
Displays values of static options
dv_config -d
Displays values of dynamic and static options
ACS
config acs new
Adds a new ACS
config acs acs_id
Reconfigures an existing ACS
Drives
config drive(s) panel_id
Reconfigures all drives on an existing drive panel. This includes adding drives, updating drive types and serial numbers for existing drives, and deleting drives that were removed from the database.
LSMs
config lsm lsm_id
Reconfigures an existing LSM and all its components, which include CAPs and panels.
|
Note: Use config acs to add or delete an LSM in an ACS |
Ports
config port(s) acs_id
Reconfigures port connections to an ACS.
Display CAP information
display cap cap_id ... [ -availability cap_availability ...] [ -status cap_status ... ] [-priority cap_priority ... ] [ -state cap_state ... ] [ -manual | -automatic ] [ -condition cap_condition ... ] [ [ -c ] | [ -f field ... ] [ -s sort_field ... ] [ -n n ] ]
Display cell information
display cell cell_loc ... [ -status cell_status ... ] [ [ -c ] | [ -f field ... ] [ -s sort_field ... ] [ -n n ] ]
Display drive information
display drive drive_id ... [ -status drive_status ... ] [-state drive_state ... ] [ -type drive_type ... ] [ -volume vol_id ... ] [ -lock lock_id... ] [ -serial drive_serial_num ... ] [ -condition drive_condition ...] [ [ -c ] | [ -f field ... ] [ -s sort_field ... ] [ -n n ] ]
Display lock information
display lock lock_id ... [ -user user_id ... ] [ [ -c ] | [ -f field ... ] [ -s sort_field ... ] [ -n n ] ]
Display LSM information
display lsm lsm_id ... [ -status lsm_status ... ] [-state lsm_state ... ] [ -free_cells cell_count ... ] [ -type lsm_type ... ] [ -serial lsm_serial_num ... ] [ -condition lsm_condition ] [ -door_open | -door_closed ] [ [ -c ] | [ -f field ... ] [ -s sort_field ... ] [ -n n ] ]
Display panel information
display panel panel_id ... [ -type panel_type ... ] [ [ -c ] |[ -f field ... ] [ -s sort_field ... ] [ -n n ] ]
Display pool information
display pool pool_id ... [ -low_water low_water_mark ... | -high_water high_water_mark... ] [-overflow | -no_overflow ] [ [ -c ] | [ -f field ... ][ -s sort_field ... ] [ -n n ] ]
Display port information
display port port_id ... [ -online | -offline ] [ -name port_name ... ] [ [ -c ] | [ -f field ... ] [-s sort_field ... ] [ -n n ] ]
Display volume information
display volume vol_id ... [ -home acs,lsm,panel,row,column...] [ -drive drive_loc ... ] [-data | -scratch | -clean ] [ -media media_type ... ] [ -pool pool_id... ] [ -standard | -virtual ] [ -status vol_status ... ] [ -entry entry_date ... ] [ -access access_date ... ] [ -lock lock_id ... ] [ [ -c ] |[ -f field ... ] [ -s sort_field ... ] [ -n n ] ] [ -max_use max_use] [ -lock_time lock_time]
db_export.sh -f [ db_file | tape_device ]
Exports database table data and ACSLS control database files to tape or a file. Use when reinstalling ACSLS or upgrading to a new ACSLS version using the same database.
db_import.sh -f [ db_file | tape_device ]
Imports database table data and ACSLS control database files from the export tape or file. Use when reinstalling ACSLS or upgrading to a new ACSLS version using the same database.
bdb.acsss -f [ backup_file | tape_device ]
Backs up the database
acsss db
Brings up the database
rdb.acsss
Recovers the database after a database failure
query cap cap_id ... | all or display cap cap_id ...|*
Displays CAP status
set cap mode manual | automatic cap_id
Sets CAP's entry mode (manual or automatic)
set cap priority cap_priority cap_id
Sets CAP's automatic selection priority
enter cap_id
Makes manual mode CAP ready to enter labelled carts
enter lsm_id
Makes multiple CAPs in an LSM ready
venter cap_id vol_id
Makes CAP ready to enter unlabeled carts into library
query lmu acs_id ... | all
Displays LMU and port status for both single-LMU and dual-LMU ACS configurations and desired state for ACSs and ports.
switch lmu acs_id
Manually switches ACS management from the ACS's master LMU to the standby LMU
set lock lock_id
Sets your lock ID.
show lock | user
Displays your current lock ID or user ID.
lock drive | volume identifier
Locks a volume or drive (to your current lock ID).
unlock drive | volume identifier ... | all
Removes active locks (to your current lock ID) on specified drives or volumes or all active locks.
clear lock drive | volume identifier
Removes all active and pending locks on specified drives or volumes.
The lib_cmd command-line utility is an alternative to the ACSLS GUI for managing and monitoring resources in ACSLS logical libraries.
lib_cmd assign drive drive_id lib_id
Adds the specified drive to the logical library.
lib_cmd unassign drive lib_id logical_drive_id
Removes the specified logical drive from the logical library configuration.
lib_cmd assign volume [ vol_id | vol-range ] lib_id
Assigns a volume for exclusive use within a logical library.
lib_cmd assign volume [ vol_id | vol-range ] lib_id
Removes a volume from the logical library inventory.
lib_cmd create library lib_name backing_acs cell_capacity drive_capacity
Creates a new logical library.
lib_cmd create mapping initiator_id target_id library_id
Establishes an initiator-target (client-server) relationship for the specified library.
lib_cmd edit library lib_id [-n name ][-c capacity ][-d drive_slots ][-f volume_label_format [6|8p|8s|all][-x imp/exp_cell_count ]
Alters the configuration of an existing logical library. Options are:
-n library alias name
-c logical storage cell capacity
-d number of logical drive slots
-f volume label format
-x number of logical import/export (CAP) cells
Volume label format may be expressed with any of the following:
6 - six character legacy volume labels
8p - eight character prefixed with media type code
8s - eight character suffixed with media type code
all - accept all label formats
lib_cmd refresh initiator
Retrieves all initiators currently known to ACSLS.
lib_cmd refresh target
Retrieves all targets currently known to ACSLS.
lib_cmd delete initiator initiator_id (y/n)
Removes the specified initiator from the configuration. Confirmation (y) is required in order to commit the specified deletion.
lib_cmd delete library lib_id (y/n)
Removes the specified logical library from the ACSLS configuration. This creates a cascading delete, disassociating any assigned volumes and drives from the library.
lib_cmd delete mapping lib_id (y/n)
Removes all initiator-target mappings from the specified logical library. The operation disables any current client connections.
lib_cmd delete target target_id (y/n)
Removes the specified target from the configuration. Confirmation (y) is required in order to commit the specified deletion.
lib_cmd display drive [drive_id ][-p acs_id | all ][-l lib_id | all ][-t drive_type ][-u acs_id ]
Generates a summary of the specified drive or all drives in the specified library.
If 'display drive all' is submitted without options, the utility generates a listing of all volumes contained in each physical ACS.
If the '-t' option is passed, only drives of the specified drive type are displayed.
The '-p' option limits the display to drives in the specified physical ACS.
If the '-l' option is included, then only the drives assigned to the specified logical library are displayed. If "all" is specified following the '-l' option, then a display is generated showing all of the drives associated with each of the configured logical libraries.
The '-u' option displays only unassigned drives in the associated ACS. This option must be followed with an argument specifying the desired ACS
lib_cmd display initiator
Generates a list of all initiators identified by ACSLS. Each initiator is listed by its world-wide name and the alias name.
lib_cmd display library [ -p acs_id | all ] [ -l lib_id | all ]
Displays the attributes of the requested library ID.
l - logical libraries
p - physical libraries
lib_cmd display mapping [ lib_id | all ]
Generates a list of initiator-target mappings for each library ID (or all libraries).
lib_cmd display target
Generates a list of all targets identified by ACSLS.
lib_cmd display volume [ vol_id | vol-range] [ -p acs_id | all ][ -l lib_id | all ][ -u acs_id ]
Generates summary information for the specified volume or volume set.
lib_cmd vary library lib_id [online|offline|diagnostic]
Changes the desired state of the logical drive to the specified (online, offline, diagnostic) state.
lib_cmd vary library lib_id drive_id [online|offline|diagnostic]
Changes the desired state of the logical library to the specified (online, offline, diagnostic) state.
lib_cmd [ exit | quit | log ]
define pool low_water_mark high_water_mark pool_id ...[overflow]
Creates or modifies scratch pools
query pool pool_id ... | all
Displays scratch pool attributes
query scratch pool_id ... | all
Displays the status of scratch volumes in a pool
set scratch pool_id vol_id | volrange
Sets volume's scratch attribute and assign the volume to a scratch pool
set scratch off pool_id vol_id | volrange
Changes volume from scratch to data
delete pool pool_id ... | all
Deletes an empty scratch pool
mount * drive_id pool_id
Mounts a scratch volume from a specified pool (single media libraries)
mount * drive_id
Mount a scratch volume from the common pool (single media libraries)
mount * drive_id pool_id media media_type
Mounts a scratch volume from a specified pool with specific media type
mount * drive_id pool_id media *
Mounts a scratch volume from a specific pool, media type based on scratch preferences defined
mount * drive_id media *
Mounts a scratch volume from common pool, media type based on defined scratch preferences
mount * drive_id media media_type
Mounts a scratch volume from common pool with specified media type
display pool pool_id ...| *
Displays scratch pool information for a specific pool or for all pools
watch_vols [start|stop]
Reviews pre-defined policies for volumes that are: newly entered, discovered by audit or cartridge recovery, or re-activated by audit/cartridge recovery/an enter.
query mount * pool_id ... [media media_type | media *]
Displays status of media-compatible drives for a specified scratch pool (or volume media type within the pool)
mount vol_id drive_id [bypass] [readonly]
Mounts a data volume or cleaning cartridge
dismount vol_id drive_id [force]
Dismounts a data volume or cleaning cartridge
volrpt [-s vol | loc | use] [-d] [-f filename][-z] [-a | -l | -v identifier_list]
Creates a volume report
set owner owner_id volume vol_id | volrange
Sets volume ownership
eject cap_id vol_id | volrange ...
Ejects volumes from the library
move vol_id lsm_id
Moves volumes to a specified LSM
del_vol [-n] [-d] [-f] [-q] vol_id
Deletes a volume in an offline LSM
moving.sh -f vol_list_file -t lsm_id...
Moves multiple cartridges to one or more LSMs.
set clean max_usage | vol_id | volrange
Sets cleaning cartridge attributes
set clean off vol_id | volrange
Sets cleaning attributes back to data cartridges
display volume vol_id | vol_range | *-clean
Displays volume information for cleaning cartridges
display volume * [-media media type] -f media end_of_life warranty_life -s end_of_life
Displays volume end of warranty and end of life percentages, sorted by end of life
query server
Queries ACSLS and library status
query acs acs_id ... | all
Queries ACS status.
query lsm lsm_id ... | all
Queries LSM status.
query cap cap_id ... | all
Queries CAP status.
query drive drive_id ... | all
Queries drive status.
query lmu acs_id ... | all
Queries LMU and port status for both single-LMU and dual-LMU ACS configurations.
query mount vol_id
Queries media-compatible drives for a specified data volume.
query mount * pool_id ... [ media media_type | media *]
Queries media-compatible drives for a specified scratch pool (or volume media type within the pool).
query port port_id .... | all
Queries port status.
query volume vol_id ... | all
Queries location of a volume.
query clean vol_id ... | all
Queries cleaning cartridge status.
query scratch pool_id ... | all
Queries scratch volumes in a pool.
query pool pool_id ... | all
Queries scratch pool attributes.
query request request_id ... | all
Queries request status.
query lock drive | volume identifier ... | all
Queries the lock status of a drive or volume.
query clean vol_id... | all
Queries cleaning cartridge attributes.
vary acs acs_id ... online | offline | diagnostic [force]
Changes the desired state and the state of an ACS.
vary lsm lsm_id ... online | offline | diagnostic [force]
Changes the state of an LSM.
vary cap cap_id ... online | offline | diagnostic [force]
Changes the state of a CAP.
vary drive drive_id ... online | offline | diagnostic [force]
Changes the state of a drive.
vary port _port_id ... online | offline
Changes the desired state and the state of a port.
|
 Copyright © 2013, 2014, Oracle and/or its affiliates. All rights reserved. Legal Notices |
|