Precautions

• Note the locations of the power supply switches on the Acme Packet 6300/6350.
• Note the location of the emergency power-off switch for the room where the Acme Packet 6300/6350 is located.
• If an electrical accident occurs, remove power from the system immediately by unplugging the chassis.
• Always disconnect the power from the system when removing a Acme Packet 6300/6350 from its rack.
• When disconnecting power:
  • Disconnect the circuit breaker at the rack.
  • Unplug or unscrew the power cords from the power supplies.
• Use grounded AC power cords that are plugged into grounded electrical outlets.
• Never use extension cords to power a Acme Packet 6300/6350.
• Ensure that the installation facilities have proper grounding systems and include a grounded rack structure or local grounding bus bar.
• When installing the Acme Packet 6300/6350 in an equipment rack, always make the ground connection first and disconnect it last upon uninstallation.
• Use shielded Category 5e or 6, RJ45 cables for all 10/100/1000 Ethernet connections to protect the Acme Packet 6300/6350 from potential damage.
• To avoid making a complete circuit (which causes electrical shock), use only one hand when working with powered-on electrical equipment.
• Use caution when using electrically conductive tools around the Acme Packet 6300/6350.
• Remove jewelry before working on the Acme Packet 6300/6350.