MetaSolv Solution Version LSR 6.11

  Release Notes 

Document history

Date Summary of Revisions
04/13/2006  Original version

Contents

Purpose of this document 
Installation
Included in this release
    Product enhancements
    Fixed issues 
     Outstanding issues and workarounds  
    Data conversions 
Documentation
    How to access documentation
    Documentation set
 Contact information
Legal Notice and Copyright 

Purpose of this document

This document provides an overview of the LSR 6.11 release, including information about installation, new enhancements, fixed issues and outstanding issues. This document also provides instructions on how to access release documentation, and if necessary, provides updates to current documents. This document may be updated after its original release, so be sure you have the most current release notes.

Return to Contents

Installation 

Refer to the MetaSolv Solution LSR versions 6.11+ Setup Guide located on the customer portal for complete installation instructions. Click the Documentation link for LSR 6 General Availability and it's listed under the Installation Documentation heading.

Return to Contents

Included in this release

Product enhancements

Enhancement to LSR XML API - Internal CR242762

Note: To use this enhancement you must be at a 6.0.6 or higher version of MetaSolv Solution.

Imports:

createLSROrderByValueRequest—Imports a local service request of type NP or DL.

return to contents

Previous product enhancements  

Various LSR 6 service packs have added the functionality described below. These enhancements are listed according to the release in which they were introduced. Please contact your MetaSolv Software representative for additional information related to these enhancements.

The following enhancements were included in LSR 6.10:

LSR XML API 

Note: To use this enhancement you must be at a 6.0.6 or higher version of MetaSolv Solution.

LSR functionality can now be accessed through an XML API. All of the functionality available in the LSR CORBA API is available in the new LSR XML API. To use the new API, you must install the MetaSolv Solution core application with the XML API option. Once the core product is installed, you can install and configure LSR 6.10. To learn more about installing and configuring the LSR application for XML APIs, see the MetaSolv Solution LSR Setup Guide.

This enhancement provides a set of XML API methods for LSR compliant with LSOG6. These methods can be incorporated into an integrator's custom workflows using the WebLogic Integration toolkit. The following LSR XML API methods are provided using a Java control:

Exports:

getLSRByKeyRequest—Exports a local service request (LSR) for a given order key.
getLRByKeyRequest—Exports a local response (LR) for a given order key.
getLSRCMByKeyRequest—Exports a local service response/completion (LSRCM) for a given order key.
getDLByKeyRequest—Exports a directory listing (DL) for a given order key.

Imports:

createLRByValueRequest—Imports a local response (LR).
createLSRCMByValueRequest—Imports a local service response/completion (LSRCM).
createNPLSRByValueRequest—Imports a number portability local service request (NPLSR).
createDSREDByValueRequest—Imports a directory service request error detail (DSRED).
createDSCNByValueRequest—Imports a directory service completion notice (DSCN).

Queries:

queryCCNARequest—Retrieves a list of all customer carrier name abbreviations (CCNA) in MetaSolv Solution.
queryLSRRequest—Retrieves a list of LSR orders for a given purchase order number (PON).
queryPONSForCCNARequest—Retrieves a list of PONs for a given CCNA.
queryLSRForPONCCNAVERRequest—Retrieves an LSR order for a given PON, CCNA and version.

To learn about working with MetaSolv Solution XML APIs in WebLogic Workshop, see the MetaSolv Solution XML API Developer’s Reference.

The following enhancements were included in LSR 6.9:

LSR 6.9 did not contain any new enhancements. 

The following enhancements were included in LSR 6.8:

LSR 6.8 did not contain any new enhancements. 

The following enhancements were included in LSR 6.7:

Application Server Support

LSR 6.7 now supports Novell exteNd Application Server 5.1 and BEA WebLogic Server 8.1.

The following enhancements were included in LSR 6.6:

Enhancement to New From functionality - Internal CR 29231

This enhancement allows you to change the ACT field and/or the SC field on an order created using New From functionality. These fields can be changed anytime up until the point when tasks are generated.  This functionality is applicable for LS, LSNP, NP, PS, LS/PS services only.

To access this enhancement

1. Select an LSR order on the Service Request Search window.
2. Right-click and select New From.
3. Enter a new PON and click OK.
4. Open the new order and enter a desired due date.
5. Select a new value from the drop-down on the ACT field and/or SC field.

The following enhancements were included in LSR 6.5:

PSR to LSR Mapping to include Directory Listing - Internal CR 35466

This enhancement allows you to map Directory Listings from the PSR to the LSR using both the DIRREQ item type at the Global level and the LINEDIR mappable item at the Service Location Line level for LSOG 5 and LSOG 6 orders.

The following enhancements were included in LSR 6.4:

LSR User Interface Change

The presentation of the LSR user interface has changed. These changes include moving the toolbar buttons to the left side of the page, a new color scheme, a new font style, and moving some menu items.  The same functionality is still available.

Adding a Link to an LSR - Internal CR 25423

This enhancement allows you to add links to Web pages, documents, and email addresses on an LSR. 

Note: This feature is only available with M/6.0 or higher.

Prerequisites

To access this enhancement

1. Search for an existing LSR.
2. Open the LSR you want to view.
3. Select the Add a Link link under Order Action.
4. Do one of the following in the URL field:

5. Click the Browse button to search for a file.
6. Enter a label for the link in the Label field.
7. Click the Test Link button to test the link.
8. Click the Add button to add the link to the PSR or LSR.

Note: To remove a link, check the checkbox next to the links you want to delete, and click the Remove button.

Adding Supplement History Notes to a Regulated Order - Internal CRs 31708, 31577

This enhancement allows you to add notes to a supplemented regulated order after you have processed the supplement. These notes will appear on the Work Queue Manager Window - Supplement History tab. These are in addition to any remarks entered in the REMARKS field of the LSR ADMIN window.  

Note: This feature is only available with M/6.0 or higher.

Prerequisites

The Enter Supplement History Notes for Regulated Orders preference must be set to Y.

To access this enhancement

1. Supplement the regulated order. (See the appropriate online Help topic in LSR for instructions on how to supplement a regulated order.)
2. Click the Process Supplement icon or press F7.
3. Enter any notes on the Supplement History Notes window.
4. Click OK.

New windows

Supplement History Notes Window

New preferences

Enter Supplement History Notes for Regulated Orders preference

Implementation of UNE-P/DIR in PSR to DSR Mapping - Internal CR 24370

You can now map Directory along with an LSPS LSR order. This item will appear as UNE-P/DIR on the Item Selection window in PSR to LSR Mapping. You can map this item with the template request of Request Type M and an AFO indicator of DA, DL, or DLA.

Return to Contents

Fixed issues

The following customer reported issues have been fixed in this release. If an IR you submitted is not listed here, it may have been resolved if its problem description matches one listed below. Please review the problem descriptions.

Component

Fixed Issue

Description

Issue ID: 200788

Internal CR#: 188186

Problem: There are LSR 6 documentation errors in the E-Fix Readme and Release Notes.

Resolution: BEA instructions were added to the LSR 6.8 efix header.

Issue ID: 204298,204670

Internal CR#: 206612

Problem: When performing an exportLSR, the LSLoopConInfos structure is populated with blank values. The customer wants the structure to be exported only when it contains data.

Resolution: When performing an exportLSR, if the LSLoopConInfos structure contains data it will be exported, otherwise the LSLoopConInfos structure will not be exported.

Issue ID: 207727

Internal CR#: 208106

Problem: The DIRQTY field is unable to be populated with numeric data.

Resolution: A new pattern was introduced to accept only numeric data for the DIRQTY field.

Issue ID: 207661

Internal CR#: 229563

Problem: The LNA field no longer defaults in LSR 6.

Resolution: The LNA field will now be auto populated with the value 'N'.

Issue ID: 208162

Internal CR#: 230118

Problem: On the Loop Service Detail window, when ALPHA characters are re-entered after initial entry on the CCEA field, the cursor jumps to the end.

Resolution: The code was modified such that the cursor will not move to the end, which allows the user to enter alpha numeric characters at the required position in the CCEA field.

Issue ID: 229594

Internal CR#: 230487

Problem: LSR Preview is not displayed properly. The PON Field value overlaps with the VER field, and data is extended to multiple pages.

Resolution: The column width for PON was increased. Rows are now aligned properly and page numbers are displaying in the proper sequence. Please refer the Print Preview Test Cases document.

Issue ID: 231309

Internal CR#: 231445

Problem: The NPORD field is not long enough and users have to scroll to see all of the data.

Resolution: The NPORD field length has been extended and users can now see all of the data in the field without scrolling.

Issue ID: 202135

Internal CR#: 231803

Problem: Validation is not picking up missing Number Port Details when using New From. This is what happens: Create a Number Port order using the New From command. Validate the LSR on the Admin page. Receive 'Do you want to generate tasks?' response window. Cancel out of response. Click on the Number Port List. NPQTY is filled in, however, Number Port Details are missing. No error is received indicating that the information is missing until the LSR is rejected from the LEC.

Resolution: A validation will now be thrown for not picking up missing Number Port Details when using New From.

Issue ID: 231814

Internal CR#: 234481

Problem: When coming from the RCONF task, an LSR can be edited and saved without SUPPING the order. This should not be allowed to happen because the user preference 'LSR View Only After Tasks Generated' is set to 'Y'.

Resolution: When coming from the RCONF task, LSR forms will be 'View Only' when the user preference 'LSR Viewonly after Tasks Generated' is set to 'Y'.

Issue ID: 234404

Internal CR#: 234667

Problem: PSR to LSR Mapping functionality does not work with existing phone lines.

Resolution: This enhancement provides the PSR to LSR Mapping functionality on existing phone lines for the following:

1. MAPLSRPORT child item can be added to existing phone line.

2. MAPLINEDIR child item can be added to the existing phone line.

3. MAPLSRPORT and MAPLINEDIR can be added to the existing phone line.

4. MAPLINEDIR can be added to the existing phone line that already has the MAPLSRPORT as a child.

Issue ID: 235950

Internal CR#: 236058

Problem: On the Location and Access Detail page, changes to the ACC field do not get saved.

Resolution: The code was fixed such that changes to ACC field on the Location and Access Detail page will now be saved.

Issue ID: 231308

Internal CR#: 239809

Problem: The application requires the user to perform a save or validate to display LR Details. This is time consuming and requires additional clicks that should not be necessary in order to see the LR Details.

Resolution: A Detail List hyper link is now available on the LR Section. Now, when an LR is imported through SProcket or any other third party tool, the user can get to the LR Details without having to save or validate.

Issue ID: 239967

Internal CR#: 240049

Problem: The Jack Info fields won't save.

Resolution: The code was fixed.  The Jack Info fields will now be saved, and loaded in the LSR.

Issue ID: 239396

Internal CR#: 240548

Problem: In LSR 6, the extra telephone number validation on ATN prevents the upgrade of LSOG 5 orders.

Resolution: For LSR orders that are upgraded from LSR5 to LSR6, the application will not produce a validation error even if the ATN field in LSRAdminForm is populated with NPA alone.

Issue ID: 241005

Internal CR#: 241980

Problem: When an LSR is imported, the error message 'Value larger than specified precision allows for this column.' is displayed, but it does not specify WHICH column. This message needs to be more specific and indicate which field is causing the problem.

Resolution: The field causing the problem was DLQTYR. It's precision is 3 and it is crossing that threshold when importing the LR. The Error message for the column was implemented for the DLQTYR field.

Return to Contents

Outstanding issues and workarounds 

There are no outstanding issues in this release.

Return to Contents

Data conversions

The following sql files are included in this release. The files are listed according to the release in which they were introduced. The Installer provides all upgrades to the MetaSolv software Executable files and Stored Procedure files (Procs Directory).  These files are not listed in detail.

LSR 6.10
cr144283.sql
cr182480.sql

LSR 6.9
cr143347.sql

LSR 6.8
 CR131819.sql
CR147202.sql

LSR 6.7
cr137535.sql
cr38004.sql
pfixSQl_master.sql

LSR 6.6
CR131819.sql

LSR 6.5
No new sqls were added in this release. cr34248.sql added in 6.4 was removed.

LSR 6.4
cr29854.sql
CR29863.sql
cr29901.sql
cr31617.sql
CR31745.sql
CR32258.sql

LSR 6.3
CR26677.sql
CR26688.sql
CR26693.sql
cr27271ipic.sql
CR29244.sql

LSR 6.2
cr13919.sql
CR14941.sql
CR14942.sql

LSR 6.1
CR11058.sql
CR9120.sql
CR9393.sql
CR9448.sql
CR9450.sql
CR9574.sql
cr9672.sql
LSR6BD1.sql
LSR6BD10.sql
LSR6BD11.sql
LSR6BD12.sql
LSR6BD2.sql
LSR6BD3.sql
LSR6BD4.sql
LSR6BD5.sql
LSR6BD6.sql
LSR6BD7.sql
LSR6BD8.sql
LSR6BD9.sql
lsr6pref.sql
lsr_master.sql
pfixloopconinfo.sql
pfixlsr6.sql
pfixlsr6crs.sql
pfixlsr6eu.sql
pfixlsr6hgi.sql
pfixlsr6iv.sql
pfixlsr6ls.sql
pfixlsr6lsnp.sql
pfixlsr6ps.sql
pfixlsr6rs.sql

LSR 6
 LSR6DBChanges.sql
CR9632.sql

Return to Contents

Documentation

How to access documentation

Documentation is available from the MetaSolv Web site and will be updated periodically at that location, so you may wish to check the site occasionally. To download documentation files for this release, please follow the steps below: 

  1. Go to www.metasolv.com and log in to the Customer Portal using your login and password.

  2. On the Customer Portal homepage, select Product Downloads and Documentation from the menu bar at the top of the page to access a listing of all products licensed by your company.

  3. Click the Documentation link for this release to access the documentation files.

Acrobat Reader is required to view the documentation. Download a free copy of Adobe Acrobat Reader from Adobe Systems at www.adobe.com if you do not have one.

Return to Contents

Documentation set

The core documentation for LSR 6 includes the following titles: 

Return to Contents

Contact information

If you have any questions about software/documentation downloads, or other support issues, please contact MetaSolv Global Customer Care (GCC): 

  • Direct to GCC Operations: 1-416-674-4004 

  • International Toll Free Direct to GCC Operations: +800-9951-9951 

  • Toll Free from US & Canada: 1-888-864-0917 

Global Customer Care hours are 9:00-5:00pm EST, Monday through Friday, excluding MetaSolv holidays.

Return to Contents

Legal notice and copyright

© 2006 MetaSolv Software, Inc. All rights reserved. MetaSolv is a trademark registered in the United States of America by MetaSolv Software, Inc. CoManage, its associated logo, and Network-Driven are registered trademarks of CoManage Corporation. All other trademarks contained herein are property of their respective owners. Any rights not expressly granted herein are reserved. Information contained herein is subject to change without notice.

Third-party software copyright information for MetaSolv Software, Inc.

 *****APACHE SOFTWARE FOUNDATION***************

The Apache Software License, Version 1.1 Copyright (c) 2000 The Apache Software Foundation.  All rights  reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The end-user documentation included with the redistribution, if any, must include the following acknowledgment: "This product includes software developed by the Apache Software Foundation (http://www.apache.org/)." Alternately, this acknowledgment may appear in the software itself, if and wherever such third-party acknowledgments normally appear. 4. The names "Apache" and "Apache Software Foundation" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact apache@apache.org. 5. Products derived from this software may not be called "Apache", nor may "Apache" appear in their name, without prior written permission of the Apache Software Foundation. THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation.  For more information on the Apache Software Foundation, please see www.apache.org. Portions of this software are based upon public domain software originally written at the National Center for Supercomputing applications, University of Illinois, Urbana-Champaign. 

**********INTALIO, INC.********************** 

Copyright 2000-2002 (C) Intalio Inc. All Rights Reserved. Redistribution and use of this software and associated documentation("Software"), with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain copyright statements and notices. Redistributions must also contain a copy of this document. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name "ExoLab" must not be used to endorse or promote products derived from this Software without prior written permission of Intalio Inc. For written permission, please contact info@exolab.org. 4.Products derived from this Software may not be called "Castor" nor may "Castor" appear in their names without prior written permission of Intalio Inc. Exolab, Castor and Intalio are trademarks of Intalio Inc. 5. Due credit should be given to the ExoLab Project (http://www.exolab.org/). THIS SOFTWARE IS PROVIDED BY INTALIO AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTALIO OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 

********NEATSEEKER******************* 

Id: LICENSE,v 1.1.1.1 2000/09/23 08:22:23 ssl Exp

The NeatSeeker Framework License, Version 1.0 Based on the Apache Software License Copyright (c) 1999 Sami Lempinen (lempinen@iki.fi). All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.  2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The end-user documentation included with the redistribution, if any, must include the following acknowlegement: "This product includes NeatSeeker software developed by Sami Lempinen (lempinen@iki.fi)." Alternately, this acknowlegement may appear in the software itself, if and wherever such third-party acknowlegements normally appear. 4. The names "NeatSeeker", "NeatMaker", and "Sami Lempinen" must not be used to endorse or promote products derived     from this software without prior written permission. For written permission, please contact lempinen@iki.fi. 5. Products derived from this software may not be called "NeatSeeker" nor may "NeatSeeker" appear in their names without prior written permission of Sami Lempinen. THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SAMI LEMPINEN OR NEATSEEKER  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF  SUCH DAMAGE.

 This product includes software developed by the Apache Software Foundation www.apache.org. 

*******WERKIN COMPANY**********************

 Id: LICENSE.txt,v 1.1 2001/12/12 19:33:28 werken Exp  Copyright 2001 (C) The Werken Company. All Rights Reserved. Redistribution and use of this software and associated documentation ("Software"), with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain copyright statements and notices. Redistributions must also contain a copy of this document. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name "Drools" must not be used to endorse or promote products derived from this Software without prior written permission of The Werken Company.  For written permission, please contact bob@werken.com. 4. Products derived from this Software may not be called "Drools" nor may "Drools" appear in their names without prior written permission of The Werken Company. Drools is a registered trademark of The Werken Company. 5. Due credit should be given to the Drools Project http://drools.org/. THIS SOFTWARE IS PROVIDED BY THE WERKEN COMPANY AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE WERKEN COMPANY OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 

****REGENTS OF THE UNIVERSITY OF CALIFORNIA*******

Portions of the code in this software product may be Copyright © 1988 by the Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms of such portions are permitted, provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that such portions of the software were developed by the University of California, Berkeley. The name of the University may not be used to endorse or promote products derived from such portions of the software without specific prior written permission. This product includes software developed by Borland Software Corp. SUCH PORTIONS OF THE SOFTWARE ARE PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. In addition, the program and information contained herein are licensed only pursuant to a license agreement that contains restrictions on use and disclosure (that may incorporate by reference certain limitations and notices imposed by third parties).

 ******US FEDERAL GOVERNMENT ACQUISITIONS*******

US Federal Government Acquisitions: Commercial Computer Software--Use Governed by Terms of Standard Commercial License Notwithstanding any other license agreement that may pertain to, or accompany the delivery of, this computer software, the rights of the United States Government regarding its use, reproduction, and disclosure are as set forth in the Commercial Computer Software-Restricted Rights clause at FAR 52.227-19.

************************OBF MATERIALS NOTICES*****************************
Copyright 2001 by the Alliance for Telecommunications Industry Solutions Inc.  All rights reserved.

The Local Service Ordering Guidelines (LSOG) document, Issue 6 dated October 2001, is copyrighted, printed and distributed by the Alliance for Telecommunications Industry Solutions (ATIS) on behalf of the ATIS-sponsored Ordering and Billing Forum (OBF).

Except as expressly permitted, no part of this publication may be reproduced or distributed in any form, in an electronic retrieval system or otherwise, without the prior express written permission of the Alliance for Telecommunications Industry Solutions.  Permission may be obtained by contacting: the Alliance for Telecommunications Industry Solutions (ATIS) at 202-628-6380.  OBF Funding Companies (which are defined in the OBF Guidelines) should refer to the OBF Guidelines (accessible from: http://www.atis.org/atis/clc/obf/obfhom.htm) as respects their rights to reproduce this publication.

Limited Exception for “Customized” Forms.  In recognition of the business needs and processes implemented by companies throughout the industry, ATIS, on behalf of the OBF, grants the following limited exception to the copyright policy given above.  The forms contained within this document, once “Customized,” may be reproduced, distributed and used by an individual or company provided that the following legend is placed on all “Customized” forms:

“This form/screen is based upon the Ordering and Billing Forum’s (OBF) industry consensus approved guidelines, found in the Local Service Ordering Guidelines (LSOG) document.  The LSOG may be obtained by contacting the Alliance for Telecommunications Industry Solutions (ATIS) at 202-628-6380.”

For purposes of this limited exception, the term “Customized” means, the modification, by a company, of an LSOG form to be issued to a trading partner to make it company specific by, for example, adding a company logo, graying-out optional fields not required by that specific issuing company, and converting into an electronic format/screen.  This limited exception does not affect the LSOG document itself which remains copyrighted and may not be reproduced in whole or part.  OBF Funding Companies (which are defined in the OBF Guidelines) should refer to the OBF Guidelines as respects their rights to reproduce this publication.

********************** COMPUTRONIX, INC.**********************************************

Copyright © 2001-2003, Computronix (Canada) Ltd., Edmonton, Alberta, Canada. All rights reserved. License for cx_Oracle. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions, and the disclaimer that follows.

2.  Redistributions in binary form must reproduce the above copyright notice, this list of conditions, and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of Computronix nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

DISCLAIMER:

THIS SOFTWARE IS PROVIDED BY COMPUTRONIX AND CONTRIBUTORS *AS IS* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL COMPUTRONIX OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Computronix® is a registered trademark of Computronix (Canada) Ltd.  

Return to Contents