Skip Navigation Links | |
Exit Print View | |
Oracle® ZFS Storage Appliance Customer Service Manual For ZS3-x, 7x20 Controllers, and DE2-24, Sun Disk Shelves |
Chapter 2 Hardware Maintenance
Disconnecting the RJ-45 Cable from the Cluster Serial Port
Storage, Power, and Fan Components
Motherboard, Memory, and PCIe Cards
ZS3-2 CRU Maintenance Procedures
Required Tools and Information
Prepare the Controller for Servicing Internal Components
ZS3-2 Prepare the Controller for Servicing Internal Components
Extend the Storage Controller From the Rack
ZS3-2 Controller Replacement Tasks
Replacing the ZS3-2 Controller SSDs and HDDs
Replacing the ZS3-2 Controller Power Supplies
Replacing the ZS3-2 Controller Fan Modules
Replacing the ZS3-2 Controller Memory
Replacing the ZS3-2 Controller PCIe Cards and Risers
Replacing the ZS3-2 Controller USB Flash Drive
Replacing the ZS3-2 Controller Battery
Oracle DE2 and Sun Disk Shelf Interoperability
ZS3-4 CRU Maintenance Procedures
Required Tools and Information
ZS3-4 Controller Replacement Tasks
Replacing the ZS3-4 Controller HDD or SSD
Replacing the ZS3-4 Controller Fan Module
Replacing the ZS3-4 Controller Power Supply
Replacing the ZS3-4 Controller Memory
Replacing the ZS3-4 Controller PCIe Cards and Risers
Replacing the ZS3-4 Controller Battery
Oracle DE2 and Sun Disk Shelf Interoperability
Power Distribution, Fan Module and Disk Components
Standalone Controller Configurations
7320 CPU and Memory Components
7320 Power Distribution and Fan Module Components
7320 Single and Cluster Controller Configurations
7x20 CRU Maintenance Procedures
Required Tools and Information
7x20 Controller Replacement Tasks
Replacing the 7x20 Controller HDD or SSD
Replacing the 7x20 Controller Fan Module
Replacing the 7x20 Controller Power Supply
Replacing the 7x20 Controller Memory
Replacing the 7x20 Controller PCIe Cards and Risers
Replacing the 7x20 Controller Battery
Oracle DE2 and Sun Disk Shelf Interoperability
Oracle Storage Drive Enclosure DE2-24P
Oracle Storage Drive Enclosure DE2-24C
Disk Shelf Maintenance Procedures
Electrostatic Discharge Precautions
Shelf Electrostatic Discharge Precautions
Removing Power from the Disk Shelf
Remove Power from the Disk Shelf
Observing and Clearing CPU faults from ILOM
Connecting to Attached Storage
The following list shows the electrical specifications for the 7120. Note that the power dissipation numbers listed are the maximum rated power numbers for the power supply. The numbers are not a rating of the actual power consumption of the appliance.
Connectors
Two C13 connectors which work on 110-220v outlets
Input
Nominal frequencies: 50/60Hz
Nominal voltage range: 100-120/200-240 VAC
Maximum current AC RMS: 13.8A @ 100 VAC
AC operating range: 90-264 VAC
Output
3.3 VDC STBY: 3.0A
+12 VDC: 86.7A
Power Dissipation
Max power consumption: 1235.3 W
Max heat output: 4212 BTU/hr
Volt-Ampere rating: 1261 VA @ 240 VAC, 0.98P.F.