The image oam_configtype.png shows the Oracle Appliance Manager Standalone Configurator Configuration Type page. The navigation frame is on the left side of the page as described in the previous image. In the navigation frame, the preceding and subsequent screens are listed as links that you can click to go directly backward or forward one page, and the current screen name is in bold font. Below the navigation frame is the Help button. In the main body of the page is a frame with the text Select Configuration Type. There are three options shown: Typical (Recommended), Custom, and SAP Application. The Typical option is selected. Below the Select Configuration Type frame are two side-by-side frames. The frame on the left is labeled Select Environment and contains options, one labeled Bare Metal, which is not selected, and one labeled Virtualized Platform, which is selected. The frame on the right is labeled Select Hardware contains three options, one labeled ODA VI, one labeled ODA-X3-2, and one labeled ODA-X4-2, which is the selected option. At the bottom of the main body of the page is a button marked Browse, and labeled Load an existing configuration. You can click Browse to locate an existing configuration file to load into the Configurator. On the lower right side of the page are the buttons Back, with an arrow pointing to the left, and Next, with an arrow pointing to the right. There is also a button marked Finish, but it is not active. Finally, there is a button marked Cancel, which closes the configurator.