System Messages: CMDSCA Catalog 1300-1399
|
![]() |
![]() |
1300 |
ERROR: Invalid option: opt | |
|
Description |
User entered invalid command line option opt for |
Action |
Use the correct command line option. | |
See Also |
| |
1301 |
ERROR: Invalid argument: arg | |
|
Description |
Invalid |
Action |
Remove the invalid command line argument. | |
See Also |
| |
1302 |
ERROR: TUXCONFIG environment variable not set. | |
|
Description |
TUXCONFIG environment variable is not set. |
Action |
Set the TUXCONFIG environment variable to a valid TUXCONFIG file and re-run the | |
1303 |
ERROR: TUXCONFIG must be an absolute pathname. | |
|
Description |
The TUXCONFIG environment variable must be of full path name. |
Action |
Set the TUXCONFIG environment variable to a valid TUXCONFIG file with full path name from system root, and then re-run the | |
1304 |
Usage: procname [-v] | |
|
Description |
Usage information of the program procname. |
Action |
No action required. | |
1305 |
ERROR: Error while obtaining the Bulletin Board parameters | |
|
Description |
An error was produced in |
Action |
Check the user log for a more specific error message. Check that TUXCONFIG is readable, and re-run the | |
See Also |
| |
1306 |
ERROR: Could not determine level of authentication required. | |
|
Description |
when |
Action |
Make sure the | |
See Also |
| |
1307 |
ERROR: Could not allocate internal TPINIT typed buffer. | |
|
Description |
Executing the |
Action |
Attempt to identify and stop any extraneous processes to free up virtual memory on your system, and then retry the utility. | |
See Also |
| |
1308 |
ERROR: Could not find entry for user UID. | |
|
Description |
When |
Action |
Contact your system administrator to ensure that your password entry contains your user ID (UID) and your login. | |
See Also |
| |
1309 |
Application Password : | |
|
Description |
A prompt for user to enter application password. |
Action |
Enter the configured Tuxedo application password. | |
See Also |
| |
1310 |
ERROR: Unable to obtain application password.n | |
|
Description |
If an applicatoion password is required, |
Action |
If | |
See Also |
| |
1311 |
ERROR: can't become a client - tpinit() failed - n | |
|
Description |
Execution of |
Action |
If the reason is that no more clients can join the application, re-try the operation a later time. The system should be configured to allow for more clients. | |
See Also |
| |
1312 |
Bulletin board does not exist. | |
|
Description |
The Tuxedo application not yet booted. |
Action |
Information only. | |
See Also |
| |
1313 |
Entering boot mode. | |
|
Description |
Entering boot mode. |
Action |
Information only. | |
See Also |
| |
1314 |
WARN: Cannot become administrator. Limited set of commands available. | |
|
Description |
The |
Action |
No action is required. | |
See Also |
| |
1316 |
Attaching to active bulletin board. | |
|
Description |
Informational message telling user that |
Action |
No action is required. | |
See Also |
| |
1317 |
ERROR: Error executing cmd. | |
|
Description |
A command was given to |
Action |
Retry the command. If it continues to fail, refer to the | |
See Also |
| |
1318 |
ERROR: -char option: argument must be numeric. | |
|
Description |
When the -char option is used as an argument to the |
Action |
Try the command again with the numeric vale for the char option. | |
See Also |
| |
1319 |
opt now on. | |
|
Description |
Command option opt is turned on. |
Action |
No action is required. | |
See Also |
| |
1320 |
opt now off. | |
|
Description |
Command option opt is turned off. |
Action |
No action is required. | |
See Also |
| |
1321 |
(not set) | |
|
Description |
No default value set. |
Action |
No action is required. | |
See Also |
| |
1322 |
Default Settings: | |
|
Description |
Default option values setting information header. |
Action |
No action is required. | |
See Also |
| |
1323 |
LMID: lmid | |
|
Description |
Default command option for LMID is lmid. |
Action |
Informational message, no action is required. | |
See Also |
| |
1324 |
group name: grp | |
|
Description |
Default command option for group is grp. |
Action |
No action is required. | |
See Also |
| |
1325 |
server id: id | |
|
Description |
Default command option for server identification is id. |
Action |
No action is required. | |
See Also |
| |
1326 |
server name: svr | |
|
Description |
Default command option for server executable name is svr. |
Action |
No action is required. | |
See Also |
| |
1327 |
ERROR: Can't allocate memory. (IC=) | |
|
Description |
|
Action |
Attempt to identify and stop any extraneous processes t free up virtual memory on your system. | |
See Also |
| |
1328 |
ERROR: Cannot perform the operation. Please check the ULOG for more descriptive message. (IC=) | |
|
Description |
|
Action |
| |
1329 |
ERROR: Invalid machine_id value | |
|
Description |
The machine_id value is invalid. |
Action |
Use the valid machine_id value. | |
See Also |
| |
1330 |
ERROR: machine instance is not present | |
|
Description |
The specified machine id is not available. |
Action |
Boot the Tuxedo application on all the machine nodes in the configuration. | |
See Also |
| |
1331 |
ERROR: call SCA service error(tperrno=errno) | |
|
Description |
Failed to call SCA service with error information described by error number errno(/var>. |
Action |
Check to see whether all the configured SCA servers are booted and available. If not, boot them. | |
See Also |
| |
1333 |
ERROR: Bad LMID(lmid). | |
|
Description |
The specified argument lmid for command option LMID is invalid or not available. |
Action |
Use the correct LMID value for the | |
See Also |
| |
1334 |
ERROR: Invalid server group name (grp). | |
|
Description |
The specified argument grp for command option group is invalid. |
Action |
Use the correct group name value for the | |
See Also |
| |
1335 |
ERROR: Illegal value for server id. | |
|
Description |
The specified argument value for command option service id is not valid. |
Action |
Use the correct server id value for the | |
See Also |
| |
1336 |
ERROR: Memory allocation failure. | |
|
Description |
Failed to allocate memory to process |
Action |
Install more system memory or configure larger system virtual memory. | |
See Also |
| |
1337 |
ERROR: Memory allocation failure. | |
|
Description |
Failed to allocate memory to process |
Action |
Install more system memory or configure larger system virtual memory. | |
See Also |
| |
1338 |
ERROR: Execution of reload failed, processing stopped. | |
|
Description |
The reload |
Action |
Check whether the targeted SCA server is booted, if not boot it. If the server is already booted check whether it is really a SCA server. | |
See Also |
| |
1339 |
ERROR: Bad LMID(lmid). | |
|
Description |
The specified argument lmid for command option LMID is invalid or not available. |
Action |
Use the correct LMID value for the | |
See Also |
| |
1340 |
ERROR: Invalid server group name (grp). | |
|
Description |
The specified argument grp for command option group is invalid. |
Action |
Use the correct group name value for the | |
See Also |
| |
1341 |
ERROR: Illegal value for server id. | |
|
Description |
The specified argument value for command option service id is not valid. |
Action |
Use the correct server id value for the | |
See Also |
| |
1342 |
ERROR: Memory allocation failure. | |
|
Description |
Failed to allocate memory to process |
Action |
Install more system memory or configure larger system virtual memory. | |
See Also |
| |
1343 |
ERROR: Memory allocation failure. | |
|
Description |
Failed to allocate memory to process |
Action |
Install more system memory or configure larger system virtual memory. | |
See Also |
| |
1344 |
ERROR: Exceution of printstats failed, processing stopped. | |
|
Description |
The printstats |
Action |
Check whether the targeted SCA server is booted, if not boot it. If the server is already booted check whether it is really a SCA server. | |
1345 |
ERROR: Memory allocation failure. | |
|
Description |
Failed to allocate memory to process target SCA server list. |
Action |
Install more memory or configure larger virtual memory. | |
1346 |
ERROR: Reading *SERVERS section | |
|
Description |
Failed to read TUXCONFIG configuration's "SERVERS" section to process target SCA server list. |
Action |
Make sure Tuxedo application is booted. If this problem persists, contact Oracle Technical Support. | |
See Also |
| |
1347 |
ERROR: Failed to acquire BB lock. | |
|
Description |
Failed to acquire Bulletin Board access lock. |
Action |
Make sure your Tuxedo application is booted and running. If this problem persists, contact Oracle Technical Support. | |
1348 |
ERROR: Unable to find service svc | |
|
Description |
Unable to find the SCA administrative service svc. |
Action |
Make sure the server is a SCA server and is built using | |
See Also |
| |
1349 |
ERROR: No service entry found. | |
|
Description |
No target SCA administrative service found in the Tuxedo application. |
Action |
Make sure the Tuxedo configuration is correct. And if the configuration contains SCA servers then make sure there server are really SCA servers and are built using | |
See Also |
| |
1350 |
ERROR: Invalid server ID (svrid) | |
|
Description |
The specified |
Action |
Use the valid server id when issue | |
See Also |
| |
1351 |
ERROR: No service entry found for group (grp) | |
|
Description |
There is no service entry for server group grp found. |
Action |
Correct the command option for server group to make it valid and make sure server group is booted. | |
See Also |
| |
1352 |
ERROR: Invalid server name (svrname) | |
|
Description |
The specified |
Action |
Correct the command option for server name to make it valid and make sure server svrname is booted. | |
See Also |
| |
1353 |
ERROR: No valid machine entry found | |
|
Description |
The specified logical machine id is not valid and can not be found in current Tuxedo configuration. |
Action |
Correct the problem by using correct machine id as | |
See Also |
| |
1354 |
ERROR: No service entry found for machine (mach) | |
|
Description |
There is no SCA administrative service found for machine mach. |
Action |
Use a valid machine id in the | |
See Also |
| |
1355 |
ERROR: Group grp is not deployed on mach | |
|
Description |
The server goup grp is not configured on machine mach or configured but not booted. |
Action |
Use a server group name that is configured and booted on target machine mach. | |
See Also |
| |
1356 |
ERROR: Group grp is not deployed on mach | |
|
Description |
The server goup grp is not configured on machine mach or configured but not booted. |
Action |
Use a server group name that is configured and booted on target machine mach. | |
See Also |
|
![]() |
![]() |
![]() |