システム・メッセージ: CMDTUXカタログ4000-4099


4002	ERROR: Syntax Error in the -g argument.
	Description	Each group specified by the `-g` argument of `tpacladd`(1) or `tpaclmod`(1) must be greater than 0 characters and less than 31 characters.
	Action	Modify the `-g` argument so that the group identification falls within acceptable limits.

4003	ERROR: Syntax Error in the `-g` argument.
	Description	Each group specified by the `-g` argument of `tpacladd`(1) or `tpaclmod`(1) must be greater than 0 characters and less than 31 characters.
	Action	Modify the `-g` argument so that the group identification falls within acceptable limits.

4004	ERROR: Could not retrieve group information.
	Description	When `tpacladd`(1) or `tpaclmod`(1) was attempting to retrieve information about one of the groups specified by the `-g` argument, an error occurred.
	Action	Try the command again. If it fails consistently, contact your Oracle Customer Support.

4005	*ERROR: Group number* does not exist.**
	Description	`tpacladd`(1) or `tpaclmod`(1) encountered a group number given via the `-g` parameter which does not exist.
	Action	Add the desired group to the `T_ACLGROUP` class by using the `tpgrpadd`(1) command, and then re-run this command.

4006	*ERROR: Group groupname* does not exist.**
	Description	`tpacladd`(1) or `tpaclmod`(1) encountered a group name given via the `-g` parameter which does not exist.
	Action	Add the desired group to the `T_ACLGROUP` class by using the `tpgrpadd`(1) command, and then re-run this command.

4008	ERROR: type field is not valid.
	Description	The type field given via the `-t` option to `tpacladd`(1), `tpaclmod`(1), or `tpacldel`(1) was invalid. The only recognized types are `SERVICE`, `ENQ`, `DEQ`, or `POSTEVENT`.
	Action	Change the `-t` option of the command being run to `SERVICE`, `ENQ`, `DEQ`, or `POSTEVENT`.

4010	ERROR: name field is not valid.
	Description	The name given to `tpacladd`(1), `tpaclmod`(1), or `tpacldel`(1) was invalid. An ACL name must not contain the characters '#', ':' or newline. Furthermore, the name must be less than or equal to 30 characters in length.
	Action	Change the name given to the command in order to comply with the specifications.

4011	*ERROR: FML32 error error.*
	Description	When adding or deleting a field from an FML buffer, the given error occurred. This error occurs when running `tpacladd`(1), `tpaclmod`(1), or `tpacldel`(1).
	Action	Try running the command again. If it fails consistently, contact your Oracle Customer Support.

4012	エラー: メモリー割当てエラーです。
	説明	コマンド`tpacladd`(1)、`tpaclmod`(1)または`tpacldel`(1)の使用時に、システムでメモリー不足が発生しました。
	アクション	コマンドが実行されたシステムのメモリーを確認してください。この操作に対して十分なメモリーがある場合は、Oracleカスタマ・サポートに連絡してください。

4014	ERROR: TUXCONFIG is not set.
	Description	`tpacladd`(1), `tpaclmod`(1), and `tpacldel`(1) must be run on configured systems. Furthermore, the `TUXCONFIG` variable must point to the Oracle TUXEDO configuration file.
	Action	Configure the application (see `ubbconfig`(5) and `tmloadcf`(1)). Set your `TUXCONFIG` variable appropriately. Run `tmloadcf`(1). Then re-run the command that caused this error.

4018	*ERROR: Unknown executable name.*
	Description	The given executable name is not known. This error can happen if the `tpgrpadd`(1), `tpgrpdel`(1), or `tpgrpmod`(1) commands have been renamed.
	Action	Do not rename the `tpgrpadd`(1), `tpgrpmod`(1), or `tpgrpdel`(1) commands. Use the original names with which the Oracle TUXEDO system binary was packaged.

4019	*ERROR: MIB error number.*
	Description	When running the `tpacladd`(1), `tpaclmod`(1), or `tpacldel`(1) command, an error occurred in the `MIB`(5). The returned error number was retrieved from the `TA_ERROR` field of the returned FML32 buffer.
	Action	Consult the `MIB`(5) reference pages to determine exactly which error was returned. Further action may be suggested by the nature of the error returned by the MIB.

4020	ERROR: grpname field is not valid.
	Description	The group name given to `tpgrpadd`(1), `tpgrpmod`(1), or `tpgrpdel`(1) was invalid. A group name must not contain the characters '#', ',', ':' or newline. Furthermore, the name must be less than or equal to 30 characters in length.
	Action	Change the group name given to the command in order to comply with the specifications.

4021	*ERROR: MIB error number.*
	Description	When running the `tpgrpadd`(1), `tpgrpmod`(1), or `tpgrpdel`(1) command, an error occurred in the `MIB`(5). The returned error number was retrieved from the `TA_ERROR` field of the returned FML32 buffer.
	Action	Consult the `MIB`(5) reference pages to determine exactly which error was returned. Further action may be suggested by the nature of the error returned by the MIB.

4022	*ERROR: FML32 error error.*
	Description	When adding or deleting a field from an FML32 buffer, the given error occurred. This error occurs when running `tpgrpadd`(1), `tpgrpmod`(1), or `tpgrpdel`(1).
	Action	Try running the command again. If it continues to fail, contact your Oracle Customer Support.

4023	エラー: メモリー割当てエラーです。
	説明	コマンド`tpgrpadd`(1)、`tpgrpmod`(1)または`tpgrpdel`(1)の使用時に、システムでメモリー不足が発生しました。
	アクション	マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。

4024	*ERROR: MIB error number.*
	Description	When running the `tpgrpadd`(1), `tpgrpmod`(1), or `tpgrpdel`(1) command, an error occurred in the `MIB`(5). The returned error number was retrieved from the `TA_ERROR` field of the returned FML32 buffer.
	Action	Consult the `MIB`(5) reference pages to determine exactly which error was returned. Further action may be suggested by the nature of the error returned by the MIB.

4025	ERROR: TUXCONFIG is not set.
	Description	`tpgrpadd`(1), `tpgrpmod`(1), and `tpgrpdel`(1) must be run on configured systems. Furthermore, the `TUXCONFIG` variable must point to the Oracle TUXEDO configuration file.
	Action	Configure the application (see `ubbconfig`(5) and `tmloadcf`(1)). Set your `TUXCONFIG` variable appropriately. Run `tmloadcf`(1). Then re-run the command that caused this error.

4026	ERROR: new group name is not valid.
	Description	The new group name given to `tpgrpmod`(1) was invalid. A group name must not contain the characters '#', ',', ':' or newline. Furthermore, the name must be less than or equal to 30 characters in length.
	Action	Change the new group name given to the command in order to comply with the specifications.

4027	ERROR: Could not retrieve group information.
	Description	When `tpgrpadd`(1) or `tpgrpmod`(1) was attempting to retrieve information about groups specified on the command line, an error occurred.
	Action	Try the command again. If the command fails consistently, contact your Oracle Customer Support.

4028	*ERROR: groupname* group already exists.**
	Description	In the `T_ACLGROUP` class, no two groups can have the same name. `tpgrpmod`(1) attempted to add two groups with the same name.
	Action	Do not attempt to have two groups with the same name. Change the group name and re-run the command.

4029	*ERROR: Group groupname* does not exist.**
	Description	`tpgrpmod`(1) attempted to modify a group that does not exist.
	Action	Use `tpgrpadd`(1) to add new groups to the `T_ACLGROUP` class. Use the Oracle TUXEDO GUI to get a complete list of the currently defined groups.

4030	*ERROR: FML32 error error.*
	Description	When adding or deleting a field from an FML32 buffer, the given error occurred. This error occurs when running `tpusradd`(1), `tpusrmod`(1), or `tpusrdel`(1).
	Action	Try running the command again. If it fails again, contact your Oracle Customer Support.

4031	エラー: メモリー割当てエラーです。
	説明	コマンド`tpusradd`(1)、`tpusrmod`(1)または`tpusrdel`(1)の使用時に、システムでメモリー不足が発生しました。
	アクション	マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。

4032	ERROR: Could not retrieve group information.
	Description	When `tpusradd`(1) or `tpusrmod`(1) was attempting to retrieve information about a group specified on the command line, an error occurred.
	Action	Try the command again. If it fails consistently, contact your Oracle Customer Support.

4033	*ERROR: Group number* does not exist.**
	Description	`tpusradd`(1) or `tpusrmod`(1) encountered a group number given via the `-g` parameter which does not exist.
	Action	Add the desired group to the `T_ACLGROUP` class by using the `tpgrpadd`(1) command, and then re-run this command.

4034	*ERROR: Group groupname* does not exist.**
	Description	`tpusradd`(1) or `tpusrmod`(1) encountered a group name given via the -g parameter which does not exist.
	Action	Add the desired group to the `T_ACLGROUP` class by using the `tpgrpadd`(1) command, and then re-run this command.

4038	*ERROR: Unknown executable name.*
	Description	The given executable name is not known. This error can happen if the `tpusradd`(1), `tpusrdel`(1), or `tpusrmod`(1) commands have been renamed.
	Action	Do not rename the `tpusradd`(1), `tpusrmod`(1), or `tpusrdel`(1) commands. Use the original names with which the Oracle TUXEDO binary was packaged.

4039	ERROR: TUXCONFIG is not set.
	Description	`tpusradd`(1), `tpusrmod`(1), and `tpusrdel`(1) must be run on configured systems. Furthermore, the `TUXCONFIG` variable must point to the Oracle TUXEDO configuration file.
	Action	Configure the application (see `ubbconfig`(5) and `tmloadcf`(1)). Set your `TUXCONFIG` variable appropriately. Run `tmloadcf`(1). Then re-run the command that caused this error.

4040	ERROR: Security level must be USER_AUTH, ACL or MANDATORY_ACL.
	Description	In order to run `tpacladd`(1), `tpaclmod`(1), or `tpacldel`(1), the security level of the Oracle TUXEDO application must be `USER_AUTH`, `ACL`, or `MANDATORY_ACL`.
	Action	Change the security level in the `ubbconfig`(5) file to `USER_AUTH`, `ACL`, or `MANDATORY_ACL`. Run `tmloadcf`(1) on the new `ubbconfig`(5) file. Then re-run the command that caused this failure.

4043	*ERROR: username* user already exists.**
	Description	In the `T_ACLPRINCIPAL` class, no two users can have the same numeric identification. `tpusrmod`(1) attempted to add two users with the same identification.
	Action	Do not attempt to have two users with the same numeric identification. Change the user name and re-run the command.

4044	*ERROR: User username* does not exist.**
	Description	`tpusrmod`(1) attempted to modify a user which does not exist.
	Action	Use `tpusradd`(1) to add new users to the `T_ACLPRINCIPAL` class. Use the Oracle TUXEDO GUI to get a complete list of the currently defined users.

4045	ERROR: usrname field is not valid.
	Description	The user name given to `tpusradd`(1), `tpusrmod`(1), or `tpusrdel`(1) was invalid. A user name must not contain the characters '#', ':' or newline. Furthermore, the name must be less than or equal to 30 characters in length.
	Action	Change the name given to the command in order to comply with the specifications.

4046	ERROR: Invalid group specified.
	Description	The group name given to `tpusradd`(1) or `tpusrmod`(1) was invalid. Either the group did not exist or there was a syntax error in the group name.
	Action	Use `tpgrpadd`(1) to add new groups. Change the group name given to the command to correspond to an existing group. Change the group name to conform to the specifications for group names.

4047	ERROR: User numbers must be between 1 and max
	Description	User numbers in the `T_ACLPRINCIPAL` class must be between 1 and 131071. A user number presented to `tpusradd`(1) or `tpusrmod`(1) was not within that range.
	Action	Change the user number to be within the allowable range and re-run the command.

4048	*ERROR: MIB error number.*
	Description	When running the `tpusradd`(1), `tpusrmod`(1), or `tpusrdel`(1) command, an error occurred in the `MIB`(5). The returned error number was retrieved from the `TA_ERROR` field of the returned FML32 buffer.
	Action	Consult the `MIB`(5) reference pages to determine exactly which error was returned. Further action may be suggested by the nature of the error returned by the MIB.

4049	*ERROR: A group with id number* already exists.**
	Description	In the `T_ACLGROUP` class, no two groups can have the same numeric identification. `tpgrpadd`(1) or `tpgrpmod`(1) attempted to add two groups with the same identification.
	Action	Do not attempt to have two groups with the same numeric identification. Change the identification number and re-run the command.

4050	*ERROR: A user with id number* already exists.**
	Description	In the `T_ACLPRINCIPAL` class, no two users can have the same numeric identification. `tpusradd`(1) or `tpusrmod`(1) attempted to add two users with the same identification.
	Action	Do not attempt to have two users with the same numeric identification. Change the identification number and re-run the command.

4053	*ERROR: User username* not added.**
	Description	Due to an error processing the user password, this user has not been added to the system. This can happen when using `tpusradd`(1) or `tpusrmod`(1).
	Action	Re-run the command that caused the error. If this error occurs consistently, call Oracle Customer Support.

4054	ERROR: Passwords do not match.
	Description	The user passwords entered to `tpusradd`(1) or `tpusrmod`(1) do not match.
	Action	Re-run the command and make sure that you enter the passwords correctly each time you are prompted.

4055	ERROR: Unable to get host user id.
	Description	`tpusradd`(1), `tpusrmod`(1), or `tpusrdel`(1) was unable to retrieve the user identification from the host system.
	Action	Make sure that the user id of the Oracle TUXEDO administrator is known to the system. If the user id is known to the system, contact your Oracle Customer Support.

4056	ERROR: Unable to get host user id.
	Description	`tpacladd`(1), `tpaclmod`(1), or `tpacldel`(1) was unable to retrieve the user identification from the host system.
	Action	Make sure that the user id of the Oracle TUXEDO administrator is known to the system. If the user id is known to the system, contact your Oracle Customer Support.

4057	ERROR: Unable to get host user id.
	Description	`tpgrpadd`(1), `tpgrpmod`(1), or `tpgrpdel`(1) was unable to retrieve the user identification from the host system.
	Action	Make sure that the user id of the Oracle TUXEDO administrator is known to the system. If the user id is known to the system, contact your Oracle Customer Support.

4058	*INFO: .SysMachineState: val* state change to ACTIVE**
	Description	This message states that the specified machine changed to ACTIVE. A complete listing of the current parameters are sent along in the posted buffer.
	Action	This is an informational message.
	See Also	`EVENT_MIB`(5), `TM_MIB`(5)
4059	ERROR: SRVID parameter must be >= 1 and <= 30000
	Description	The `SRVID` parameter in the JDBCCONNPOOLS section of the configuration file must be within the proper range of values.
	Action	Specify a value that is between 1 and 30,000, inclusive.
	See Also	`tmloadcf`(1), `ubbconfig`(5)
4060	*ERROR: Unknown executable name.*
	Description	The given executable name is not known. This error can happen if the `tpacladd`(1), `tpacldel`(1), or `tpaclmod`(1) commands have been renamed.
	Action	Do not rename the `tpacladd`(1), `tpaclmod`(1), or `tpacldel`(1) commands. Use the original names with which the Oracle TUXEDO system binary was packaged.

4062	*ERROR: MIB error number.*
	Description	When running the `tpusradd`(1), `tpusrmod`(1), or `tpusrdel`(1) command, an error occurred in the `MIB`(5). The returned error number was retrieved from the `TA_ERROR` field of the returned FML32 buffer.
	Action	Consult the `MIB`(5) reference pages to determine exactly which error was returned. Further action may be suggested by the nature of the error returned by the MIB.

4063	*INFO: .SysNetworkState: LMID1->LMID2* state change to INACTIVE**
	Description	This message indicates that the virtual circuit between machines LMID1 and LMID2 changed to an INACTIVE state. A complete listing of the current parameters are sent along in the posted buffer.
	Action	This is an informational message.
	See Also	`EVENT_MIB`(5), `TM_MIB`(5)
4064	*INFO: .SysMachineState: LMID* state change to PARTITIONED**
	Description	This message states that the specified machine changed to a new state as mentioned in the message. A complete listing of the current parameters are sent along in the posted buffer.
	Action	This is an informational message.
	See Also	`EVENT_MIB`(5), `TM_MIB`(5)
4065	*INFO: .SysNetworkState: LMID1->LMID2* state change to ACTIVE**
	Description	This message indicates that the virtual circuit between machines LMID1 and LMID2 changed to a new state as mentioned in the message. A complete listing of the current parameters are sent along in the posted buffer.
	Action	This is an informational message.
	See Also	`EVENT_MIB`(5), `TM_MIB`(5)
4066	*INFO: .SysNetworkState: LMID1->LMID2* state change to SUSPENDED**
	Description	This message indicates that the virtual circuit between machines LMID1 and LMID2 changed to a SUSPENDED state. A complete listing of the current parameters are sent along in the posted buffer.
	Action	This is an informational message.
	See Also	`EVENT_MIB`(5), `TM_MIB`(5)
4068	INFO: .SysServerState: servername, group srvgrp, id srvid state change to state
	Description	This message indicates that the server specified above changed to a new state. A complete listing of the server attributes are sent in the posted buffer.
	Action	This is an informational message.
	See Also	`EVENT_MIB`(5), `TM_MIB`(5)
4069	INFO: .SysClientState: User usrname on LMID state change to state
	Description	This message indicates that the client specified above changed to a new state. A complete listing of the current attributes of the client are sent in the posted buffer.
	Action	This is an informational message.
	See Also	`EVENT_MIB`(5), `TM_MIB`(5)
4070	ERROR: Application must be configured.
	Description	`tpacladd`(1), `tpaclmod`(1), and `tpacldel`(1) must be run on configured systems. Furthermore, the `TUXCONFIG` variable must point to the Oracle TUXEDO configuration file.
	Action	Configure the application (see `ubbconfig`(5) and `tmloadcf`(1)). Set your `TUXCONFIG` variable appropriately. Run `tmloadcf`(1). Then re-run the command that caused this error.

4071	ERROR: Application must be configured.
	Description	`tpgrpadd`(1), `tpgrpmod`(1), and `tpgrpdel`(1) must be run on configured systems. Furthermore, the `TUXCONFIG` variable must point to the Oracle TUXEDO configuration file.
	Action	Configure the application (see `ubbconfig`(5) and `tmloadcf`(1)). Set your `TUXCONFIG` variable appropriately. Run `tmloadcf`(1). Then re-run the command that caused this error.

4072	ERROR: Application must be configured.
	Description	`tpusradd`(1), `tpusrmod`(1), and `tpusrdel`(1) must be run on configured systems. Furthermore, the `TUXCONFIG` variable must point to the Oracle TUXEDO configuration file.
	Action	Configure the application (see `ubbconfig`(5) and `tmloadcf`(1)). Set your `TUXCONFIG` variable appropriately. Run `tmloadcf`(1). Then re-run the command that caused this error.

4073	*INFO: .SysNetworkConfig: LMID1->LMID2* configuration change**
	Description	This message indicates that the network link between the two machines specified changed to a new state. A complete listing of the current parameters are sent along in the posted buffer.
	Action	This is an informational message.
	See Also	`EVENT_MIB`(5), `TM_MIB`(5)
4075	*INFO: .SysMachineState: LMID* state change to INACTIVE**
	Description	This message states that the specified machine changed to an INACTIVE state. A complete listing of the current parameters are sent along in the posted buffer.
	Action	This is an informational message.
	See Also	`EVENT_MIB`(5), `TM_MIB`(5)
4076	ERROR: .SysEventDelivery: System Event Monitor delivery failure on LMID
	Description	This message indicates that the event server failed to perform at least one notification for a posted event.
	Action	Check to make sure that the notifications specified in the subscriptions that match the posted events can be done.
	See Also	`EVENT_MIB`(5), `TM_MIB`(5)
4077	ERROR: .SysEventFailure: System Event Monitor subsystem failure on LMID
	Description	The system event server periodically sends a message to itself to detect blocking conditions on the message queues. This event is generated if the server can't put a message on the queue in no-block node. It can also be generated if the received message doesn't match what was sent out earlier. The second case will probably never happen.
	Action	Configure larger message queues or distribute the load in the application equally among all the machines.
	See Also	`EVENT_MIB`(5), `TM_MIB`(5)
4078	エラー: メモリーの割当てに失敗しました
	説明	イベント・サーバーでメモリーの割当てに失敗しました。
	アクション	マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。

4080	エラー: 受信したメッセージが送信したメッセージと一致しません
	説明	イベント・サーバーは、`NOWAIT`モードで自己にメッセージを送信し、直後にそのメッセージを受信することで、メッセージ・キュー・サブシステムのブロッキング状態を定期的にテストします。このメッセージは、受信したメッセージと送信したメッセージが一致しなかったことを示します。
	アクション	Oracleカスタマ・サポートに連絡してください。
	関連項目	`TMSYSEVT`(5)、`TMUSREVT`(5)
4081	*ERROR: FML32 error error.*
	Description	When adding or deleting a field from an FML32 buffer, the given error occurred. This error occurs when running `tpaclcvt`(1).
	Action	Try running the command again. If it fails consistently, contact your Oracle Customer Support.

4082	エラー: メモリー割当てエラーです。
	説明	コマンド`tpaclcvt`(1)の使用時に、システムでメモリー不足が発生しました。
	アクション	マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。

4083	*INFO: Line number* not added because it is a comment.**
	Description	The given line number in the user file was ignored by `tpaclcvt`(1). The line was not formatted correctly, and hence was ignored.
	Action	Be sure that the file which is being converting has the correct format.

4084	*INFO: User ID field field* is not numeric. Line number not added.**
	Description	If `tpaclcvt`(1) encounters a user identification number which is not numeric, then it does not attempt to add the user. This can occur when converting the user file.
	Action	Be sure that the file which is being converted has the correct format.

4085	*INFO: User ID number* is invalid. Line number not added.**
	Description	User identification numbers are only valid within the range 1 to 131,071. If `tpaclcvt`(1) encounters a user identification number which is not in the given range, then it does not attempt to add the user.
	Action	Any users which `tpaclcvt`(1) could not add can be added with `tpusradd`(1).

4086	*INFO: Group ID field number* is not numeric. Line number not added.**
	Description	If `tpaclcvt`(1) encounters a group identification number which is not numeric, then it does not attempt to add the user. This can occur when converting the user file.
	Action	Any users which `tpaclcvt`(1) could not add can be added with `tpusradd`(1).

4087	*INFO: Line number* not added. # is an illegal character.**
	Description	The given line in the user file was not converted by `tpaclcvt`(1). This is because a # character was encountered in the username, which is illegal.
	Action	Any users which `tpaclcvt`(1) could not add can be added with `tpusradd`(1).

4088	*INFO: Line number* not added. error_string.**
	Description	`tpaclcvt`(1) encountered an error when attempting to get information concerning the user on the given line.
	Action	Examine the error code returned. This error can be used to determine the actual Oracle TUXEDO system error that occurred.

4089	*INFO: Line number* user name not added. Error retrieving number of occurrences.**
	Description	When `tpaclcvt`(1) is converting a user file, it attempts to look for duplicate users. If an error occurs while extracting the number of users, this message occurs.
	Action	Any users which `tpaclcvt`(1) could not add can be added with `tpusradd`(1).

4090	*INFO: Line number* user username not added. User username already exists.**
	Description	When `tpaclcvt`(1) is converting a user file, it attempts to look for duplicate users. If an error occurs while extracting the number of users, this message occurs.
	Action	You can add any user which `tpaclcvt`(1) did not add with `tpusradd`(1).

4091	*INFO: Line number* not added. error_string.**
	Description	`tpaclcvt`(1) encountered an error when attempting to get information concerning user identifiers.
	Action	Examine the error code returned. This error can be used to determine the actual Oracle TUXEDO system error that occurred.

4092	*INFO: Line number* user name not added. Error retrieving number of occurrences.**
	Description	When `tpaclcvt`(1) is converting a user file, it attempts to look for duplicate users identification numbers. If an error occurs while extracting the number of user identifiers, this message occurs.
	Action	Any users which `tpaclcvt`(1) could not add can be added with `tpusradd`(1).

4093	*INFO: Line number* user usernumber not added. User usernumber already exists.**
	Description	`tpaclcvt`(1) did not add the given user because that user identification number already exists.
	Action	Any users which `tpaclcvt`(1) could not add can be added with `tpusradd`(1).

4094	*INFO: Line number* user username not added. Error writing file.**
	Description	`tpaclcvt`(1) was attempting to modify the user file to add the given user.
	Action	Run a diagnostic on the disk to see whether the disk is corrupted. If it is corrupted, buy a new disk and run the command again. If it is not, contact Oracle Customer Support.

4095	*INFO: Line number* not added because it is a comment.**
	Description	The given line number in the group file was ignored by `tpaclcvt`(1). The line was not formatted correctly, and hence was ignored.
	Action	Be sure that the file which is being converted has the correct format.

4096	*INFO: Group ID field string* is not numeric. Line number not added.**
	Description	If `tpaclcvt`(1) encounters a group identification number that is not numeric, then it does not attempt to add the user. This can occur when converting the group file.
	Action	Any groups which `tpaclcvt`(1) could not add can be added with `tpgrpadd`(1).

4097	*INFO: Line number* not added. error_string.**
	Description	`tpaclcvt`(1) encountered an error when attempting to add a group. The error_string can help to determine exactly what error occurred.
	Action	Examine the error code returned. This error can be used to determine the actual Oracle TUXEDO system error that occurred.

4098	*INFO: Line number* Group groupname not added. Error retrieving error.**
	Description	`tpaclcvt`(1) encountered an error when adding a group to the `T_ACLGROUP` class. When attempting to retrieve the error from the returned FML32 buffer, an error occurred.
	Action	If this error occurs consistently, contact Oracle Customer Support.

4099	INFO: Line number Group groupname:error_string
	Description	`tpaclcvt`(1) received the given error_string from the MIB when adding the group on the given line.
	Action	Use the error_string returned from the MIB to determine exactly what error occurred.