システム・メッセージ: CMDTUXカタログ6400-6499
|
![]() |
![]() |
6401 |
ERROR: MAXTRANTIME parameter must be > 0 and <= 2147483647 | |
|
Description |
|
Action |
| |
6403 |
ERROR: MAXSPDATA parameter must be >= 0 and <= 2147483640 | |
|
Description |
|
Action |
| |
6451 |
ERROR: BRIDGE Internal thread coordination error | |
|
Description |
Internal problem while initializing threaded BRIDGE (BRTHREADS=Y). |
Action |
Contact Oracle Customer Support with information about your environment. | |
6452 |
INFO: Threaded BRIDGE: Thread contention scope=contention_scope | |
|
Description |
This is informational to indicate the BRIDGE is booted in threaded mode (BRTHREADS=Y). The thread contention scope is always "system" and indicates that the BRIDGE uses kernel-level threads as opposed to process-level threads. |
Action |
No action required. | |
6453 |
エラー: スレッド調整エラー | |
|
説明 |
スレッド化BRIDGE (BRTHREADS=Y)の初期化中に発生した内部の問題です。 |
アクション |
環境に関する情報を用意して、Oracleカスタマ・サポートに連絡してください。 | |
6454 |
エラー: スレッド化BRIDGE: 予期しないシグナルを受信しました | |
|
説明 |
これはスレッド・モードで動作するBRIDGEに固有のエラーです。スレッド化BRIDGEの機能ではシグナルは使用されず、通常、BRIDGEスレッドによってマスクされます。BRIDGEスレッドが予期しないシグナルの受信を検出すると、このエラー・メッセージが表示されます。 |
アクション |
BRIDGEプロセスに誤ってシグナルを送信するプロセスがないか確認してください。環境に関する情報を用意して、Oracleカスタマ・サポートに連絡してください。 | |
6455 |
ERROR: Threaded BRIDGE handling incoming connection handshake(node) | |
|
Description |
The threaded BRIDGE encountered an unexpected internal error while establishing a connection with a remote BRIDGE. |
Action |
Contact Oracle Customer Support with information about your environment and with the value of node. | |
6456 |
ERROR: Threaded BRIDGE error on sending saved messages to LMID | |
|
Description |
The threaded BRIDGE encountered an unexpected internal error while processing some temporarily buffered messages. |
Action |
Contact Oracle Customer Support with information about your environment and with the value of LMID. | |
6457 |
ERROR: Threaded BRIDGE error on sending saved messages to LMID | |
|
Description |
The threaded BRIDGE encountered an unexpected internal error while processing some temporarily buffered messages. |
Action |
Contact Oracle Customer Support with information about your environment and with the value of LMID. | |
6458 |
ERROR: Threaded BRIDGE error during encryption negotiation with LMID | |
|
Description |
The threaded BRIDGE encountered an unexpected internal error during encryption handshake while setting up a connection with a remote BRIDGE. |
Action |
Contact Oracle Customer Support with information about your environment and with the value of LMID. | |
6459 |
ERROR: memory allocation failed | |
|
Description |
The system does not have enough memory for the threaded BRIDGE to build a response to a MIB query for statistics. |
Action |
Check system memory usage. Contact Oracle Customer Support with information about your environment. | |
6460 |
エラー: スレッド化BRIDGE: 内部エラー・シャットダウン | |
|
説明 |
スレッド化BRIDGEで重大な内部エラーが発生したためシャットダウンします。 |
アクション |
環境に関する情報を用意して、Oracleカスタマ・サポートに連絡してください。 | |
6461 |
警告: スレッド化BRIDGE: 予期しないスレッドが内部シャットダウンを実行しています | |
|
説明 |
スレッド化BRIDGEがシャットダウン中に内部スレッド調整の問題を検出しました。ただし、BRIDGEは安全にシャットダウンします。 |
アクション |
Oracleカスタマ・サポートに環境に関する情報を報告してください。 | |
6462 |
情報: スレッド化BRIDGE: システムを終了します | |
|
説明 |
これはスレッド化BRIDGEが正常にシャットダウンすることを示す情報です。 |
アクション |
アクションは不要です。 | |
6463 |
エラー: スレッドの作成に失敗しました | |
|
説明 |
スレッド化BRIDGEがスレッドの作成中に失敗しました。 |
アクション |
システムのスレッド・リソースとチューニング可能パラメータを確認してください。環境に関する情報を用意して、Oracleカスタマ・サポートに連絡してください。 | |
6464 |
エラー: スレッドの作成に失敗しました | |
|
説明 |
スレッド化BRIDGEがスレッドの作成中に失敗しました。 |
アクション |
システムのスレッド・リソースとチューニング可能パラメータを確認してください。環境に関する情報を用意して、Oracleカスタマ・サポートに連絡してください。 | |
6465 |
エラー: メッセージ・キューの読取りに失敗しました | |
|
説明 |
独自のメッセージ・キューの読取り中にスレッド化BRIDGEで内部エラーが発生したため、シャットダウンします。 |
アクション |
目的の操作を再試行してください。システムIPCリソースの使用率を確認してください。問題が解決しない場合は、Oracleカスタマ・サポートに連絡してください。 | |
6466 |
エラー: ネットワーク・ポーリングに失敗しました | |
|
説明 |
ネットワークのポーリング中にスレッド化BRIDGEで内部エラーが発生したため、シャットダウンします。 |
アクション |
必要な操作を再試行してください。ネットワーク・インタフェースとネットワーク構成を確認してください。問題が解決しない場合は、Oracleカスタマ・サポートに連絡してください。 | |
6467 |
エラー: 時限条件変数の待機エラーが発生しました | |
|
説明 |
条件変数を使用したスレッドの調整中に、スレッド化BRIDGEで内部エラーが発生しました。BRIDGEがシャットダウンします。 |
アクション |
システムのスレッド・リソースとチューニング可能パラメータを確認してください。環境に関する情報を用意して、Oracleカスタマ・サポートに連絡してください。 | |
6468 |
エラー: スレッドのシャットダウンの調整に失敗しました | |
|
説明 |
シャットダウン時に、スレッド化BRIDGEが独自のスレッドを調整(結合)しようとして、内部エラーを検出しました。 |
アクション |
システムのスレッド・リソースとチューニング可能パラメータを確認してください。環境に関する情報を用意して、Oracleカスタマ・サポートに連絡してください。 | |
6469 |
エラー: スレッドのシャットダウンの調整に失敗しました | |
|
説明 |
シャットダウン時に、スレッド化BRIDGEが独自のスレッドを調整(結合)しようとして、内部エラーを検出しました。 |
アクション |
システムのスレッド・リソースとチューニング可能パラメータを確認してください。環境に関する情報を用意して、Oracleカスタマ・サポートに連絡してください。 | |
6470 |
エラー: BRIDGEメモリーの割当てに失敗しました | |
|
説明 |
スレッド化BRIDGEに割り当てる十分なメモリーがシステムにありません。 |
アクション |
システムのメモリー使用量を確認してください。環境に関する情報を用意して、Oracleカスタマ・サポートに連絡してください。 | |
6471 |
ERROR: BRIDGE Host mutex initialization failure host(node) | |
|
Description |
The threaded BRIDGE could not create a mutex. |
Action |
Check system resource tunables. If problem persists, contact Oracle Customer Support with information about your environment. | |
6472 |
エラー: スレッド化BRIDGE: ホストごとの接続の上限に達しました | |
|
説明 |
スレッド化BRIDGEが、通常のシナリオでは超過することのない内部限度を検出しました。 |
アクション |
環境に関する情報を用意して、Oracleカスタマ・サポートに連絡してください。 | |
6473 |
ERROR: Internal thread error mutex:error_type:file:line | |
|
Description |
Threaded BRIDGE encountered an unexpected internal error, possibly timing related. The message contains information to aid Oracle Customer Support. |
Action |
Contact Oracle Customer Support with the error message and information about your environment. | |
6474 |
エラー: スレッド化BRIDGE: 受信ネットワーク・メッセージの処理中に内部エラーが発生しました | |
|
説明 |
ネットワークからのメッセージの受信中に、スレッド化BRIDGEで内部エラーが発生しました。 |
アクション |
環境に関する情報を用意して、Oracleカスタマ・サポートに連絡してください。 | |
6475 |
エラー: スレッド化BRIDGE: 受信暗号化ネットワーク・メッセージの処理中に内部エラーが発生しました | |
|
説明 |
ネットワークから受信したメッセージの復号化中に、スレッド化BRIDGEで内部エラーが発生しました。 |
アクション |
環境に関する情報を用意して、Oracleカスタマ・サポートに連絡してください。 | |
6476 |
エラー: スレッド化BRIDGE: 順不同の受信暗号化ネットワーク・メッセージを処理中に内部エラーが発生しました | |
|
説明 |
ネットワークから受信した複数のメッセージの復号化中に、スレッド化BRIDGEで内部エラーが発生しました。 |
アクション |
環境に関する情報を用意して、Oracleカスタマ・サポートに連絡してください。 | |
6477 |
エラー: 接続セットアップ・エラーが発生しました | |
|
説明 |
接続設定に対する内部ネットワーク・ファイル記述子の割当て中に、BRIDGEでエラーが発生しました。 |
アクション |
環境に関する情報を用意して、Oracleカスタマ・サポートに連絡してください。 | |
6478 |
エラー: マシン・セクションが見つかりませんでした | |
|
説明 |
BRIDGEがTUXCONFIGファイルのマシン・セクションにあるBRTHREADSの構成を読み取れませんでした。 |
アクション |
TUXCONFIG環境変数を確認してください。TUXCONFIGがポイントするファイルに適切な権限が設定されていることを確認してください。 | |
6479 |
ERROR: Could not find LMID lmid in machine section | |
|
Description |
BRIDGE could not correctly read the configuration for BRTHREADS in the machine section of the TUXCONFIG file. |
Action |
Check the TUXCONFIG environment variable. Check that the file pointed to by TUXCONFIG has correct permissions. Check that the TUXCONFIG file is not corrupted, using | |
6480 |
警告: TMNOTHREADSがBRTHREADSと競合しています。TMNOTHREADSを無視します | |
|
説明 |
これは情報を提供するものですが、TMNOTHREADS環境変数の設定がBRTHREADSと競合する場合、BRIDGEがスレッド・モードで動作するかどうかはTMNOTHREADSの影響を受けないということを強調するために、警告として分類されています。 |
アクション |
アクションは不要です。 | |
関連項目 |
| |
6481 |
INFO: Configuration file version already specified, replace it with new file version <ver> | |
|
Description |
This is informational. The LAUTHSVR configuration file contains version for the file format supported by LAUTHSVR. The configuration file contains more than one entries for the file format version. The version specified later will be used to parse the remaining of the configuration file. |
Action |
Remove the duplicated entry from the LAUTHSVR configuration file. | |
See Also |
| |
6482 |
エラー: LDAPプロトコルのバージョン2または3のみをサポートします | |
|
説明 |
LAUTHSVR構成ファイルで指定されたLDAPプロトコルのバージョンはサポートされていません。 |
アクション |
LDAPプロトコルをサポートされているバージョンに変更します。 | |
関連項目 |
| |
6483 |
INFO: LDAP protocol version already specified, replace it with new version <ver> | |
|
Description |
This is informational. The LAUTHSVR configuration file contains LDAP protocol version information for it to communicate with LDAP server. The configuration file contains more than one entries for the LDAP protocol version. The version specified later will be used to communicate with LDAP server. |
Action |
Remove the duplicated entry from the LAUTHSVR configuration file. | |
See Also |
| |
6484 |
INFO: LDAP bind DN already specified, replace it with new bind DN <dn> | |
|
Description |
This is informational. The LAUTHSVR configuration file contains distinguish name of the LDAP administrator to be used to communicate with LDAP server. The configuration file contains more than one entries for LDAP administrator DN. The |
Action |
Remove the duplicated entry from the LAUTHSVR configuration file. | |
See Also |
| |
6485 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
LAUTHSVR構成ファイルの処理に十分なメモリーがシステムにありません。 |
アクション |
システムのメモリー使用量を確認し、問題が解決しない場合はOracleカスタマ・サポートに連絡してください。 | |
関連項目 |
| |
6486 |
情報: 検索ベースがすでに指定されています。新しい検索ベースと置き換えてください | |
|
説明 |
これは情報です。LAUTHSVR構成ファイルには、LDAPサーバーのディレクトリ情報ツリー検索用の検索ベースが含まれています。この構成ファイルに、この情報ツリー検索ベースに対する複数のエントリが含まれています。ディレクトリ情報ツリーの検索には、最後に指定された検索ベースが使用されます。 |
アクション |
LAUTHSVR構成ファイルから重複したエントリを削除してください。 | |
関連項目 |
| |
6487 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
LAUTHSVR構成ファイルの処理に十分なメモリーがシステムにありません。 |
アクション |
システムのメモリー使用量を確認し、問題が解決しない場合はOracleカスタマ・サポートに連絡してください。 | |
関連項目 |
| |
6488 |
INFO: LDAP | |
|
Description |
This is informational. The LAUTHSVR configuration file allows using a different LDAP user identification attribute name. The configuration file contains more than one entries for the |
Action |
Remove the duplicated entry from the LAUTHSVR configuration file. | |
See Also |
| |
6489 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
LAUTHSVR構成ファイルの処理に十分なメモリーがシステムにありません。 |
アクション |
システムのメモリー使用量を確認し、問題が解決しない場合はOracleカスタマ・サポートに連絡してください。 | |
関連項目 |
| |
6490 |
情報: LDAPバインドDNのパスワードがすでに指定されています。新しいパスワードと置き換えてください | |
|
説明 |
これは情報です。LAUTHSVR構成ファイルには、LDAP管理者がLDAPサーバーにログインするためのパスワードが含まれています。この構成ファイルに、パスワードのエントリが複数含まれています。LDAPサーバーへのログインには、最後に指定されたパスワードが使用されます。 |
アクション |
LAUTHSVR構成ファイルから重複したエントリを削除してください。 | |
関連項目 |
| |
6491 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
LAUTHSVR構成ファイルの処理に十分なメモリーがシステムにありません。 |
アクション |
システムのメモリー使用量を確認し、問題が解決しない場合はOracleカスタマ・サポートに連絡してください。 | |
関連項目 |
| |
6492 |
ERROR: None numeric value (val) specified for cache expiration | |
|
Description |
The LAUTHSVR configuration allows user to specify how long an user record will be cached in the memory. The tag name for this attribute is called |
Action |
Correct the problem and reboot the LAUTHSVR server. | |
See Also |
| |
6493 |
INFO: Cache expiration time already specified, replace it with new expiration <exp-time> | |
|
Description |
This is informational. The LAUTHSVR configuration file allows user to specify how long an user record will cached in the memory. The configuration file contains more than one entries for the cache expiration time. The expiration time specified later will be used. |
Action |
Remove the duplicated entry from the LAUTHSVR configuration file. | |
See Also |
| |
6494 |
ERROR: Unsupported search order "srch_order" | |
|
Description |
The user specified an unsupported |
Action |
Correct the configuration error, and reboot the LAUTHSVR. | |
See Also |
| |
6495 |
INFO: Database search order already specified, replace it with new order <srch-order> | |
|
Description |
This is informational. The LAUTHSVR configuration file allows user to specify the search order of the database. The configuration file contains more than one entries for the database search order. The search order specified later will be used. |
Action |
Remove the duplicated entry from the LAUTHSVR configuration file. | |
See Also |
| |
6496 |
INFO: Local | |
|
Description |
This is informational. The LAUTHSVR configuration file allows user to specify the file name of the Tuxedo |
Action |
Remove the duplicated entry from the LAUTHSVR configuration file. | |
See Also |
| |
6497 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
LAUTHSVR構成ファイルの処理に十分なメモリーがシステムにありません。 |
アクション |
システムのメモリー使用量を確認し、問題が解決しない場合はOracleカスタマ・サポートに連絡してください。 | |
関連項目 |
| |
6498 |
INFO: WLS Domain name already specified, replace it with new Domain name <wls-dom> | |
|
Description |
This is informational. The LAUTHSVR configuration file allows user to specify which WLS domain will be used as LDAP server. The configuration file contains more than one entries for the WLS Domain name. The domain name specified later will be used. |
Action |
Remove the duplicated entry from the LAUTHSVR configuration file. | |
See Also |
| |
6499 |
エラー: ファイル・バージョン1のみをサポートします | |
|
説明 |
現在、LAUTHSVRは構成ファイル仕様のバージョン1のみをサポートしています。 |
アクション |
構成を修正し、LAUTHSVRを再起動してください。 | |
関連項目 |
|
![]() |
![]() |
![]() |