システム・メッセージ: CMDTUXカタログ7000-7099


7000	*ERROR: Minimum encryption (strength* is larger than 56, but only the 56-bit SSL package is installed**
	Description	The configured minimum encryption strength is greater than 56 bits, but the installed TUXEDO system is licensed to do at maximum 56 bits encryption.
	Action	Change the configuration to the allowable encryption strength value, or contact Oracle Customer Support for purchasing the TUXEDO SSL license.

7001	警告: この構成ではSSL暗号化が構成されていますが、SSLパッケージがインストールされていません
	説明	BRIDGE構成にはSSLが必要ですが、インストールされているTUXEDOにはSSLを使用するためのライセンスがありません。
	アクション	LLEのライセンスがある場合はそれを使用するように構成を変更し、それ以外の場合はOracleカスタマ・サポートに連絡してTUXEDO SSLライセンスを購入してください。

7002	*WARN: Minimum encryption (strength) is larger than 56, but only the 56-bit SSL package is installed*
	Description	The configured minimum encryption strength) is greater than 56 bits, but the installed TUXEDO system is licensed to do at most 56 bits encryption.
	Action	Change the configuration to the allowalbe encryption strngth value, or contact Oracle Customer Support for purchasing the TUXEDO SSL license.

7003	ERROR: NO SSL encryption package installed, but this configuration speifies SSL
	Description	The 'tlisten' process is configured with SSL but the installed TUXEDO System is not licensed to use SSL.
	Action	Modified your configuration, or call Oracle Customer Support for purchasing TUXEDO SSL license.

7004	*ERROR: 56-bit SSL package installed. num* bits minimum encryption is configured**
	Description	A 56-bit TUXEDO SSL package is installed, bu the configured minimum SSL encryption strength requrement is greater than 56 bits.
	Action	Modify configuration, or call Oracle Customer Support.

7005	ERROR: -s is specified, but the SSL package is not installed
	Description	The SSL secure port option is specified for tlisten process but the installed TUXEDO System does not have SSL package.
	Action	Change command line option, or contact Oracle Customer Support for purchasing TUXEDO SSL package.

7006	*ERROR: -z (number-of-bits) is larger than 56, but only 56-bit SSL package is installed*
	Description	The SSL minimum encryption strength option is specified with value 'number-of-bits' for tlisten process but the installed TUXEDO SSL package only support maximum 56 bit encryption strength.
	Action	Change command line option, or contact Oracle Customer Support for purchasing TUXEDO SSL package.

7007	ERROR: Cannot initialize SSL subsystem
	Description	The tlisten or slisten process failed while during SSL subsystem initialization.
	Action	Look for prior error message in the ULOG to find the true nature of the failure. The most common problems are due to the incorrect PKI configuration. Check your SSL configuration especially the certificate and private key to see whether they match the PKI plug-in configuration. You may also need to check whether your LDAP filter rules.

7008	エラー: ピアが接続をクローズしました
	説明	BRIDGE SSLネットワーク接続がピアによってクローズされました。
	アクション	ピアのULOGでネットワーク接続がクローズされた理由を確認してください。

7009	エラー: ピアが接続をクローズしました
	説明	BRIDGE SSLネットワーク接続がピアによってクローズされました。
	アクション	ピアのULOGでネットワーク接続がクローズされた理由を確認してください。

7010	エラー: ピアが接続をクローズしました
	説明	BRIDGE SSLネットワーク接続がピアによって正常にクローズされました。
	アクション	ピアのULOGでネットワーク接続がクローズされた理由を確認してください。

7011	*ERROR: Memory allocation failure for nbytes* bytes**
	Description	An attempt by BRIDGE to allocate memory dynamically for nbytes bytes failed while receiving network message.
	Action	Make sure the operation system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also increate the space on the swap device.

7012	ERROR: Missing security principal name in registry
	Description	The slisten is configured to use SSL but the required security principal name is not found in Windows registry.
	Action	Run 'TUXEDO Administration' from control panel and correct Windows registrys information. Or reinstall TUXEDO and configure it correctly.

7013	ERROR: Missing security principal location in registry
	Description	The slisten is configured to use SSL but the required security principal private key location is not found in Windows registry.
	Action	Run 'TUXEDO Administration' from control panel and correct Windows registrys information. Or reinstall TUXEDO and configure it correctly.

7014	ERROR: Missing security principal password in registry
	Description	The slisten is configured to use SSL but the required security principal password for private key is not found in Windows registry. This password is in encrypted and represented in BASE64 format.
	Action	Run 'convertp2e.exe password' from command line, copy the output. Then run 'TUXEDO Administration' from control panel and paste the data. Or reinstall TUXEDO and configure the private key password.

7015	情報: レジストリに最大暗号化強度がありません。デフォルトの128ビットを使用します。
	説明	'`slisten`'プロセスの最大暗号化強度がWindowsレジストリで構成されていません。最大暗号化強度として128ビットが使用されます。
	アクション	アクションは不要ですが、128ビットが適さない場合は、'TUXEDO Administrator'を使用してレジストリを変更するか、TUXEDOを再インストールして正しく構成してください。

7016	ERROR: Invalid maximum encryption strength(n) in registry!
	Description	The maximum encryption strength is incorrectly configured in the Windows registry with a value of 'n'.
	Action	Correct the configured value either through reinstall TUXEDO or modify the registry using 'TUXEDO Administrator'.

7017	情報: レジストリに最小暗号化強度がありません。デフォルトの0ビットを使用します。
	説明	'`slisten`'プロセスの最小暗号化強度がWindowsレジストリで構成されていません。最小暗号化強度として0ビットが使用されます。
	アクション	アクションは不要ですが、0ビットが適さない場合は、'TUXEDO Administrator'を使用してレジストリを変更するか、TUXEDOを再インストールして正しく構成してください。

7018	ERROR: Invalid minimum encryption strength(n) in registry!
	Description	The minimum encryption strength is incorrectly configured in the Windows registry with a value of 'n'.
	Action	Correct the configured value either through reinstall TUXEDO or modify the registry using 'TUXEDO Administrator'.

7019	*ERROR: Minimum encryption strength(min) greater than maximum encryption strength(max)!*
	Description	The configured minimum encryption strength 'min' is greater than maximum encryption value 'max'.
	Action	Correct the configured value either through reinstall TUXEDO or modify the registry using 'TUXEDO Administrator'.

7020	ERROR: Could not encrypt principal password, errno=ecode
	Description	The encryption of user private key password failed with error return code 'ecode'.
	Action	Contact Oracle Customer Support.

7021	ERROR: Could not initialize encryption of principal password, errno=ecode
	Description	Failed to initialize the encyrption process for user private key password.
	Action	Check ULOG for actual cause of the failure and contact Oracle Customer Support.

7022	ERROR: TSAM Manager reported error: error message
	Description	TSAM Manager reported error message to the request from LMS.
	Action	Check ULOG for actual cause of the failure and contact Oracle Customer Support

7023	"\nWARN: MAXSPDATA parameter should be >= %d and <= 2147483640\n"
	Description	The MAXSPDATA is out of range. TUXCONFIG is still generated using MAXSPDATA = 0. The default value is used when TUXCONFIG is reading memory at boot time.
	Action	If MAXSPDATA related features are not used (for example, TSAM), ignore this message. Otherwise, set the MAXSPDATA with the indication.

7024	"\nWARN: According to the specified MAXQUEUES (or MAXSERVERS, if MAXQUEUES not set), the MAXSPDATA parameter should be >= %d and <= 2147483640\n"
	Description	MAXSPDATA is out of range. This range is decided by MAXQUEUES (or MAXSERVERS, if MAXQUEUES not set). TUXCONFIG is still generated using MAXSPDATA = 0. The default value is used when TUXCONFIG is reading memory at boot time.
	Action	If MAXSPDATA related features are not used (for example, TSAM), ignore this message. Otherwise, set the MAXSPDATA with the indication.

7025	ERROR: tms_abort xa_rollback returned error for group groupname
	Description	Oracle TUXEDO was rolling back a transaction. The resource manager returned an error when `xa_rollback` was called. The `XA` return code was not `XA_OK`, `XA_HEURRB`, or `XAER_NOTA`.
	Action	Check the error reporting mechanism for the associated resource manager.

7026	ERROR: tms_habort xa_rollback returned error for group groupname
	Description	Oracle TUXEDO was heuristically rolling back a transaction. The `xa_rollback()` function returned an error that was not one of the expected values.
	Action	Check the error reporting mechanism for the associated resource manager.

7027	ERROR: tms_timeout xa_rollback returned error for group groupname
	Description	Oracle TUXEDO was processing a timeout request for a transaction. The resource manager returned an error from `xa_rollback`.
	Action	Check the error reporting mechanism for the associated resource manager.

7028	エラー: 1台のマシンには、1つのLMSインスタンスのみが許可されています
	説明	1台のマシンで使用できるLMSインスタンスは1つのみです。
	アクション	Tuxedoドメインでは、1台のマシンに1つのLMSのみをデプロイしてください。

7029	ERROR: TSAM Manager rejected message: request message
	Description	TSAM Manager refused to accept a request message from LMS.
	Action	Check ULOG for actual cause of the failure and contact Oracle Customer Support

7031	ERROR: TUXCONFIG environment variable not set
	Description	While executing `tpkill`, the TUXCONFIG environment variable has not been set and exported.
	Action	Set and export the TUXCONFIG environment variable and re-execute the command.
	See Also	`tpkill`(1)
7032	エラー: TUXCONFIGファイルのRESOURCESセクションを読み取れません
	説明	`tpkill`は、TUXCONFIGファイルのRESOURCESセクションにある情報を取得できませんでした。ユーザー・ログに含まれる追加情報に、失敗の理由が示されている場合があります。たとえば、TUXCONFIG環境変数が設定されていない可能性があります。
	アクション	詳細は、ユーザー・ログを確認してください。必要であれば、Oracle Tuxedoシステムの管理者に連絡してください。

7033	エラー: アプリケーション管理者でないために、実行権限が拒否されました
	説明	`tpkill`は、TUXCONFIGファイルのRESOURCESセクションの定義に従ってTUXEDOシステムの管理者が実行する必要があります。
	アクション	適切なユーザーとしてコマンドを再実行してください。

7034	エラー: 公開鍵のサブシステムを初期化できません
	説明	`tpkill`が独自の公開鍵サブシステムを初期化できませんでした。レジストリまたは構成されたプラグインに問題がある可能性があります。
	アクション	`epifregedt`コマンドを使用して、レジストリが一貫性がある状態であることを確認してください。レジストリが一貫性がある状態の場合は、Oracleカスタマ・サポートに連絡してください。
	関連項目	`epifregedt`(1)
7035	ERROR: Cannot become a client - tperrno tperrno_value errno errno_value Uunixerr Uunixerr_value
	Description	The administrative client `tpkill` could not join the application. tperrno_value provides further information about the cause of the problem. If tperrno_value is TPEOS (7), then errno_value contains the operating system error number and Uunixerr_value contains a code representing the failed system call.
	Action	There may be more than one instance of `tpkill` running at the same time. Ensure that at most one instance of `tpkill` is running at any one time.

7036	エラー: メモリーの割当てに失敗しました
	説明	`tpkill`に対するメモリーの割当てに失敗しました。
	アクション	メモリー・リソースが使い果された可能性があります。`tpkill`の実行前にシステム管理ツールを使用してメモリーを解放してください。

7039	ERROR: Can not lock the bulletin board
	Description	A bulletin board lock could not be obtained when `tpkill` attempt to kill a Tuxedo process.
	Action	Try again after a few seconds, giving the bulletin board lock recovery algorithm time to run. If this error continues, contact your Oracle TUXEDO system Technical Support.

7042	ERROR: NADDR parameter does not support wildcard([::]) in MP mode when IPv6 enabled.
	Description	In UBB configuration file, configure NADDR parameter as wildcard([::]) is not allowed.
	Action	Change NADDR to specific IP address and try again.

7043	ERROR: NLSADDR parameter does not support wildcard([::]) in MP mode when IPv6 enabled.
	Description	In UBB configuration file, configure NLSADDR parameter as wildcard([::]) is not allowed.
	Action	Change NLSADDR to specific IP address or hostname and try again.

7044	ERROR: tlisten does not support wildcard([::]).
	Description	When booting tlisten with -l //[::], tlisten configured to bind on wildcard([::]) IP address is not allowed.
	Action	Configure tlisten with -l on specific IP address or hostname and try again .

7045	*エラー: 起動できません。ROUTINGセクションの読取り中にエラーが発生しました**
	説明	`tmboot`プロセスの際に、構成ファイルのROUTINGセクションを読み取れませんでした。
	アクション	環境変数`TUXCONFIG`が正しく設定され、エクスポートされていること、`TUXCONFIG`が破損していないこと(`tmunloadcf`を試行して確認)、または`TUXCONFIG`が構成内のすべてのマシンに伝播されていることを検証してください。
	関連項目	`tmboot`(1)、`tmunloadcf`(1)
7046	*ERROR: Cannot boot old release site (site_name) when CLOPT is greater than 256*
	Description	For pre-Tuxedo 10gR3 releases, the CLOPT is limited to 256. When Tuxedo is running in a mixed releases MP mode environment on any slave node that runs a release earlier than Tuxedo 10gR3, then CLOPT is limited to 256 for the entire Tuxedo Application domain.
	Action	Either upgrade the older release node to Tuxedo 10gR3 and above, or change the CLOPT to value smaller than or equal to 256.

7047	*ERROR: Cannot boot old release site (site_name) when ROUTING section FIELD is greater than 30*
	Description	For pre-Tuxedo 10gR3 releases, the FIELD of ROUTING section is limited to 30. When Tuxedo is running in a mixed releases MP mode environment on any slave node that runs a release earlier than Tuxedo 10gR3, then FIELD of ROUTING section is limited to 30 for the entire Tuxedo Application domain.
	Action	Either upgrade the older release node to Tuxedo 10gR3 and above, or change the FIELD of ROUTING section to value smaller than or equal to 30.

7048	*エラー: 起動できません。SERVICESセクションの読取り中にエラーが発生しました**
	説明	`tmboot`プロセスの際に、構成ファイルのSERVICESセクションを読み取れませんでした。
	アクション	環境変数`TUXCONFIG`が正しく設定され、エクスポートされていること、`TUXCONFIG`が破損していないこと(`tmunloadcf`を試行して確認)、または`TUXCONFIG`が構成内のすべてのマシンに伝播されていることを検証してください。
	関連項目	`tmboot`(1)、`tmunloadcf`(1)
7049	*ERROR: Cannot boot older Oracle Tuxedo release site (site_name) when SERVICES section service name is greater than 15*
	Description	For Oracle Tuxedo release older than 11gR1, the UBBCONFIG SERVICES section service name is limited to 15. From Oracle TUXEDO 11gR1 and later the service name length is increased to 127. When Oracle Tuxedo is running in a mixed-release-MP-mode environment on slave nodes that run a release earlier than 11gR1, then service names in the UBBCONFIG SERVICES section is limited to 15 for the entire Oracle Tuxedo Application domain.
	Action	Upgrade the older release node to Oracle Tuxedo 11gR1 and above, or change the UBBCONFIG SERVICES section service name to value smaller than or equal to 15.

7050	*ERROR: Cannot boot old release site (site_name) when RESOURCE section AUTHSVC name is greater than 15.*
	Description	For Oracle Tuxedo release older than 11gR1, the service name length for AUTHSVC in the UBBCONFIG RESOURCES section is limited to 15. From Oracle TUXEDO 11gR1 and above, the service name length is increased to 127. When Oracle Tuxedo is running in a mixed-release MP-mode environment on slave nodes that run a release earlier than 11gR1, then AUTHSVC is limited to 15 for the entire Oracle Tuxedo Application domain.
	Action	Either upgrade the older release node to Oracle Tuxedo 11gR1 and above, or change AUTHSVC in the RESOURCES section to a value smaller than or equal to 15.
	See Also	`tmboot`(1), `UBBCONFIG`(5)
7052	ERROR: SESSIONROLE parameter must be BEGIN, END or NONE
	Description	UBBCONFIG services section SESSIONROLE parameter must be set to BEGIN, END or NONE
	Action	Set UBBCONFIG services section SESSIONROLE parameter to BEGIN, END or NONE
	See Also	`UBBCONFIG`(5)
7054	ERROR: AFFINITYSCOPE parameter must be MACHINE, GROUP or SERVER
	Description	UBBCONFIG services section AFFINITYSCOPE parameter must be set to MACHINE, GROUP or SERVER
	Action	Set UBBCONFIG services section AFFINITYSCOPE parameter to MACHINE, GROUP or SERVER
	See Also	`UBBCONFIG`(5)
7056	ERROR: AFFINITYSTRICT parameter must be MANDATORY or PRECEDENT
	Description	UBBCONFIG services section AFFINITYSTRICT parameter must be set to MANDATORY or PRECEDENT
	Action	Set UBBCONFIG services section AFFINITYSTRICT parameter to MANDATORY or PRECEDENT
	See Also	`UBBCONFIG`(5)
7057	ERROR: Cannot advertise services with long names when an older Oracle Tuxedo release joins an application
	Description	For Oracle Tuxedo release older than 11gR1, the service name is limited to 15. From TUXEDO 11gR1 and above, the service name has increased to 127. When Tuxedo is running in a mixed-release MP mode environment on slave nodes that run a release earlier than 11gR1, the service name is limited to 15 for the entire Oracle Tuxedo Application domain.
	Action	Either upgrade the older release node to Oracle Tuxedo 11gR1 and above, or change the service name to value smaller than or equal to 15.

7061	*ERROR: Duplicate RMS section**
	Description	More than one RMS section has been specified in the configuration file.
	Action	Modify the configuration file so that only one RMS section is specified.
	See Also	`ubbconfig`(5)
7062	*ERROR: GROUPS section must appear before RMS section*
	Description	The RMS section has been defined before the GROUPS section in the configuration file.
	Action	Edit the configuration file such that the RESOURCES, MACHINES, and GROUPS sections are the first three sections in that order.
	See Also	`ubbconfig`(5)
7063	エラー: メモリーの割当てに失敗しました
	説明	mallocを使用してオペレーティング・システムから動的にメモリーを割り当てようとしましたが、`UBBCONFIG`ファイルのRMSセクションに保持される情報を追跡するための表の設定中に失敗しました。
	アクション	前出のメッセージ157を参照してください。

7065	ERROR: RMID parameter must be >= 1 and <= 31
	Description	The value for `RMID` (permissions) as specified in the RMS section of the `UBBCONFIG` file is less than 1 or greater than 31. `RMID` must be greater than or equal to 1 and less than or equal to 31.
	Action	Correct the value for `RMID` as specified in theRMS section of the `UBBCONFIG` file to be greater than or equal to 1 and less than or equal to 31.
	See Also	`ubbconfig`(5)
7067	*ERROR: Group name must be <= len* characters in length**
	Description	The `SRVGRP` value indicated by the arrow is greater than 30 characters in length.
	Action	Edit the configuration file such that all `SRVGRP` values are less than or equal to 30 characters in length.
	See Also	`ubbconfig`(5)
7069	*ERROR: Group name grpname* not defined in GROUPS section*
	Description	The specified server group name grpname has not been defined in the GROUPS section of the configuration file.
	Action	Edit the configuration file such that the server group name is defined in the GROUPS section.
	See Also	`ubbconfig`(5)
7071	*ERROR: TMSNAME parameter must be <= len* characters in length**
	Description	The value for `TMSNAME` indicated by the arrow is greater than 256 characters.
	Action	Specify a value for `TMSNAME` that is less than or equal to 256 characters in length.
	See Also	`ubbconfig`(5)
7073	ERROR: TMSNAME cannot be configured if the NO_XA option is set
	Description	The identifier for `TMSNAME` as specified in the RMS section of the `UBBCONFIG` cannot be set if the `OPTIONS` in the RESOURCE section has the NO_XA option set.
	Action	Correct the incompatible value of the `UBBCONFIG` file and re-run `tmloadcf`(1).
	See Also	`ubbconfig`(5) and `tmloadcf` (1)
7075	ERROR: TMSCOUNT parameter must be > 1 and <= 256
	Description	The `TMSCOUNT` parameter in the RMS section of the configuration file must be within the proper range of values.
	Action	Specify a value that is between 2 and 256, inclusive.
	See Also	`tmloadcf`(1), `ubbconfig`(5)
7077	*ERROR: OPENINFO parameter must be <= len* characters in length**
	Description	The value for the `OPENINFO` string indicated by the arrow is greater than 256 characters in length.
	Action	Specify a value for the `OPENINFO` string that is less than or equal to 256 characters in length.
	See Also	`ubbconfig`(5)
7079	ERROR: OPENINFO cannot be configured if the NO_XA option is set
	Description	The identifier for `OPENINFO` as specified in the RMS section of the `UBBCONFIG` cannot be set if the `OPTIONS` in the RESOURCE section has the NO_XA option set.
	Action	Correct the incompatible value of the `UBBCONFIG` file and re-run `tmloadcf`(1).
	See Also	`ubbconfig`(5) and `tmloadcf` (1)
7080	*ERROR:Non encrypted part of OPENINFO attribute must be <= val* characters in length**
	Description	The non-encrypted part of the `OPENINFO` value of the `RMS` section of the configuration file must be <= 200 characters.
	Action	Specify a value that is less than or equal to 200 characters.
	See Also	`tmloadcf`(1), `ubbconfig`(5)
7082	*ERROR: CLOSEINFO parameter must be <= len* characters in length**
	Description	The value for the `CLOSEINFO` string indicated by the arrow is greater than 256 characters.
	Action	Specify a value for the `CLOSEINFO` string that is less than or equal to 256 characters in length.
	See Also	`ubbconfig`(5)
7084	ERROR: CLOSEINFO cannot be configured if the NO_XA option is set
	Description	The identifier for `CLOSEINFO` as specified in the RMS section of the `UBBCONFIG` can not be set if the `OPTIONS` in the RESOURCE section has the NO_XA option set.
	Action	Correct the incompatible value of the `UBBCONFIG` file and re-run `tmloadcf`(1).
	See Also	`ubbconfig`(5) and `tmloadcf` (1)
7086	*ERROR: RMS identifier entry name must be <= number* characters in length**
	Description	The value specified for the RMS identifier entry name in the RMS section of the `ubbconfig`(5) file is longer than number characters in length.
	Action	Shorten the value specified for this attribute and rerun `tmloadcf`(1).
	See Also	TUXEDO Administrator's Guide, `tmloadcf`(1), < code>ubbconfig(5)
7088	*ERROR: RMS entry name rmsname* must not contain , comma, or colon*
	Description	A RMS entry name specified starting in the first column of a line in the `RMS` section of the UBBCONFIG file contained an asterisk`,` comma, or colon. This is not allowed. It is also possible for this error to occur if the `tmloadcf` program interprets some other parameter as a group name due to earlier errors in the configuration file.
	Action	Verify that the configuration file has the proper syntax. If necessary, choose a new name for the RMS entry name which meets the syntax restrictions.
	See Also	`ubbconfig`(5)
7090	ERROR: Duplicate RMS entry rmsname*
	Description	The value for the rmsname indicated by the arrow is invalid due to being specified previously in the RMS section of the configuration file.
	Action	Specify a value for rmsname that has not already been specified in the RMS section of the configuration file.
	See Also	`ubbconfig`(5)
7091	エラー: メモリーの割当てに失敗しました
	説明	mallocを使用してオペレーティング・システムから動的にメモリーを割り当てようとしましたが、`UBBCONFIG`ファイルのRMSセクションに保持される情報を追跡するための表の設定中に失敗しました。
	アクション	前出のメッセージ157を参照してください。

7092	エラー: メモリーの割当てに失敗しました
	説明	mallocを使用してオペレーティング・システムから動的にメモリーを割り当てようとしましたが、`UBBCONFIG`ファイルのRMSセクションに保持される情報を追跡するための表の設定中に失敗しました。
	アクション	前出のメッセージ157を参照してください。

7093	ERROR: More than 32766 RMS entries in configuration file
	Description	The application was configured to handle up to 32766 configured RMS entries and has excess RMS entries defined in the `ubbconfig`(5) file.
	Action	Decrease the number of RMS entries in the `*RMS` section of the ubbconfig(5) file and rerun `tmloadcf`(1).
	See Also	TUXEDO Administrator's Guide, `tmloadcf`(1), < code>ubbconfig(5)
7094	ERROR: SRVGRP parameter missing in RMS entry AOUT*
	Description	Each entry in the RMS section of the configuration file must have a `SRVGRP` parameter.
	Action	Specify a `SRVGRP` value that specifies the group name for the group which the RMS entry belong to.
	See Also	`ubbconfig`(5)
7095	エラー: メモリーの割当てに失敗しました
	説明	mallocを使用してオペレーティング・システムから動的にメモリーを割り当てようとしましたが、`UBBCONFIG`ファイルのRMSセクションに保持される情報を追跡するための表の設定中に失敗しました。
	アクション	前出のメッセージ157を参照してください。

7096	*ERROR: RMID parameter missing in RMS entry**
	Description	Each entry in the RMS section of the configuration file must have a `RMID` parameter.
	Action	Specify a `RMID` value that specifies an integer that uniquely identifies a RMS entry within a RMS.
	See Also	`ubbconfig`(5)
7097	ERROR: The parameter RMID of RMS entry is duplicated for group grpname*
	Description	The value for the RMID is invalid due to being specified previously in the RMS section of the configuration file.
	Action	Verify that the configuration file has the proper syntax. If necessary, choose a new value for the RMID which meets the syntax restrictions.
	See Also	`ubbconfig`(5)
7098	ERROR: The total number of RMS entries for one group cannot be more than number
	Description	The total number of RMS entries which belong to the same group cannot be more than number.
	Action	Decrease the total number of RMS entries to not more than number.
	See Also	`ubbconfig`(5)
7099	ERROR: The total number of TMSCOUNT for one group must be > 1 and <= 256
	Description	The total number of `TMSCOUNT` parameter in the RMS section for one server group must be within the proper range of values.
	Action	Make the total number of TMSCOUNT for one server group between 2 and 256 inclusive.
	See Also	`tmloadcf`(1), `ubbconfig`(5)