システム・メッセージ: ISNATカタログ1200-1299
|
1200 |
INFO: .SysClientState: User usrname on LMID state change to state | |
|
Description |
This message indicates that the specified client application changed to a new state. A complete listing of the current attributes of the client application is sent in the posted buffer. |
Action |
This is an informational message. | |
See Also |
The | |
1201 |
WARN: .SysClientSecurity: User usrname on LMID authentication failure | |
|
Description |
This message indicates that the specified client application failed security validation when trying to join the application. A complete listing of the current attributes of the client application is sent in the posted buffer. |
Action |
Make sure that a hacker is not trying to gain access to your application data. | |
See Also |
The | |
1214 |
エラー: タイプ・スイッチの非初期化に失敗しました | |
|
説明 |
クライアント・アプリケーション・バッファの処理中に、バッファ非初期化関数 |
アクション |
バッファ・タイプ・スイッチをチェックし、正しく設定されている(つまり、正しい非初期化関数が正しいバッファ・タイプに関連付けられている)ことを確認してください。バッファ・タイプがアプリケーションによって定義されている場合は、非初期化関数をチェックして正しくコーディングされていることを確認してください。 | |
関連項目 |
| |
1222 |
エラー: -zオプションの引数は数値である必要があります | |
|
説明 |
IIOPサーバー・リスナーのコマンド・ライン・オプションに無効な引数が渡されました。
|
アクション |
| |
関連項目 |
| |
1223 |
エラー: -Zオプションの引数は数値である必要があります | |
|
説明 |
IIOPサーバー・リスナーのコマンド・ライン・オプションに無効な引数が渡されました。
|
アクション |
| |
関連項目 |
| |
1237 |
ERROR: tpnotify(TPACK) failed to reply, tperrno = tperrno | |
|
Description |
The IIOP Server Handler sent an acknowledged unsolicited message to a client application. However, that client application never acknowledged the message. |
Action |
The network may have experienced an error, or the client application waiting for the notification may have been killed. The tperrno process may provide clues as to the cause of this failure. If neither of these events has occurred, contact Oracle Technical Support. | |
1240 |
ERROR: Failed to read server table entry, tperrno = tperrno | |
|
Description |
The IIOP Server Listener was rebooting after a failure and could not read the server table. |
Action |
The Bulletin Board may be corrupted. The tperrno process may provide clues as to the cause of this failure. Contact Oracle Technical Support. | |
1241 |
エラー: tpbroadcast()またはtpnotify()コールへの応答をクライアントに送信できませんでした | |
|
説明 |
IIOPサーバー・ハンドラがクライアント・アプリケーションから確認を受信しましたが、 |
アクション |
tpnotifyのオリジネータが強制終了された可能性があります。通知のオリジネータが強制終了されていない場合は、Oracleテクニカル・サポートに連絡してください。 | |
1242 |
ERROR: Bad Internet type of listening address provided: address | |
|
Description |
The address is not a valid Internet address. |
Action |
Any address that starts with // must be a valid Internet address. The following formats are recognized by the system: | |
1249 |
エラー: -Hと-nに異なる長さのネットワーク・アドレスが指定されています | |
|
説明 |
外部アドレスを使用する場合、そのアドレスの書式は-nオプションと同じであることが必要です。 |
アクション |
-Hオプションを変更して-nオプションと同じ書式にしてください。 | |
1254 |
エラー: 会話型シーケンス番号が間違っています | |
|
説明 |
会話は保護のために順序付けされます。会話型メッセージの1つが順序を無視して届きました。この会話は切断されており、トランザクションがアクティブだった場合はABORTONLY状態に設定されています。 |
アクション |
ユーザー・ログを参照して、IIOPサーバー・ハンドラ用メッセージ・キューへのメッセージ送信をBRIDGEが中止したかどうかを確認してください。中止した場合は、大量のメッセージを正しく処理するために、オペレーティング・システムをチューニングする必要があります。この問題は圧縮の使用により改善されることもあります。このエラーは、BRIDGEが新しいネットワーク・リンクへのフェイルオーバー、または優先度の高いリンクへのフェイルバックを行う際にも発生します。 | |
1277 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
1278 |
エラー: アドレス変換エラーです | |
|
説明 |
IIOPサーバー・ハンドラでバイナリ形式のアドレスをテキスト形式に変換しようとして、問題が発生しました。 |
アクション |
このエラーが常に発生する場合は、Oracleテクニカル・サポートに連絡してください。 | |
1279 |
エラー: 記述子割当てエラーです | |
|
説明 |
IIOPサーバー・ハンドラが、リスニング・エンドポイントに対してネットワーク・リソースを割り当てられませんでした。 |
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
1280 |
ERROR: Could not initialize network (error) | |
|
Description |
The IIOP Server Handler or IIOP Server Listener could not initialize its network. |
Action |
Ensure that the network is viable on the machine. If the network is viable, contact Oracle Technical Support. | |
1281 |
ERROR: Could not initialize global information (error) | |
|
Description |
The IIOP Server Handler or IIOP Server Listener could not initialize its network. |
Action |
Ensure that the network is viable on the machine. If the network is viable, contact Oracle Technical Support. | |
1283 |
ERROR: Network error (error) servicing network event | |
|
Description |
The IIOP Server Listener encountered a severe error while handling network events. |
Action |
Ensure that the network is viable on the machine. If the network is viable, contact Oracle Technical Support. | |
1284 |
WARN: Failed to allocate a network resource (error) | |
|
Description |
The IIOP Server Handler or IIOP Server Listener could not allocate a network descriptor for a remote connection. |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1286 |
エラー: -Kの引数は、client、handler、both、noneのいずれかである必要があります | |
|
説明 |
|
アクション |
| |
1287 |
WARN: Forced shutdown of client; user name 'name'; client name 'name'; client address 'xxx.xxx.xxx.xxx' | |
|
Description |
This error may result from an IIOP Server Handler being shut down when client applications are connected, a client application connection has timed out, the IIOP Server Handler was unable to send a network message to the client application, or an incorrect APP_PW (application password) was rejected during |
Action |
If APP_PW is turned on, see your | |
1288 |
警告: SO_KEEPALIVEのためのsetsockopt()が失敗しました | |
|
説明 |
IIOPサーバー・リスナーとハンドラのペアに対してKEEPALIVEハンドラ側ネットワーク・オプションが構成されましたが、有効化できませんでした。 |
アクション |
このエラーは無視され、IIOPサーバー・ハンドラによる処理は正常に続行します。ただし、ネットワーク・エラーが報告されない、またはすぐに報告されない可能性があります。使用不能のネットワーク接続に関連付けられているリソースを再生処理するために、非アクティブ・クライアント・アプリケーション・タイムアウト( | |
関連項目 |
| |
1289 |
警告: KEEPALIVEオプションがリクエストされましたが、このプラットフォームでは使用できません | |
|
説明 |
IIOPサーバー・リスナーとハンドラのペアに対してKEEPALIVEハンドラ側ネットワーク・オプションが構成されていますが、このプラットフォームでは使用できないため有効化できません。 |
アクション |
このエラーは無視され、IIOPサーバー・ハンドラによる処理は正常に続行します。ただし、ネットワーク・エラーが報告されない、またはすぐに報告されない可能性があります。使用不能のネットワーク接続に関連付けられているリソースを再生処理するために、非アクティブ・クライアント・アプリケーション・タイムアウト( | |
関連項目 |
| |
1290 |
ERROR: Can't parse the address address | |
|
Description |
While the networking software was attempting to resolve address, an error occurred. |
Action |
Any address that starts with // must be a valid Internet address. The following formats are recognized by the system: //hostname:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the host name and port number portion of address can be located by your server. | |
1291 |
ERROR: Can't resolve host name in address address | |
|
Description |
While the networking software was attempting to resolve the host name portion of address, an error occurred. |
Action |
Any address that starts with // must be a valid Internet address. The following formats are recognized by the system: //hostname:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the host name portion of address can be located by your DNS server. | |
1292 |
ERROR: Unknown address type: address | |
|
Description |
The given address does not correspond to a type known by the system. |
Action |
The WLE software understands several types of address format. Addresses that start with // must be Internet addresses. Other formats may or may not be understood by the WLE software. | |
1293 |
ERROR: Can't resolve port number in address address | |
|
Description |
While the networking software was attempting to resolve the port number portion of address, an error occurred. |
Action |
Any address that starts with // must be a valid Internet address. The following formats are recognized by the system: //hostname:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the port number portion of address can be located by your server. | |
1294 |
ERROR: Can't convert the address address to binary format | |
|
Description |
While the WLE software was trying to convert an address to an internal binary representation, an error occurred. |
Action |
Contact Oracle Technical Support. | |
1295 |
ERROR: Illegal character in the address address | |
|
Description |
There is an illegal character in the port portion of address. Ports may only have alphanumeric characters. |
Action |
Remove the illegal character from the port portion of the address. | |
1296 |
ERROR: Missing port number in the address address | |
|
Description |
The address must have a port number portion. |
Action |
Supply a port number portion in the given address. Otherwise, the IIOP Server Listener or IIOP Server Handler cannot determine its listening end point properly. | |
1297 |
ERROR: Port number cant be bigger than value in the address address | |
|
Description |
The port number portion of address is larger than the largest allowable port number of value. |
Action |
Change the port number to be within the specified range. |