22007 - Inconsistent Application ID Lists from a Peer

Event Type: DIAM

Description: The list of Application IDs supported by a peer during the Diameter Capabilities Exchange procedure on a particular transport connection is not identical to one of the list of Application IDs received from the peer over a different available transport connection to that peer.

Severity: Info

Instance: <PeerName>

HA Score: Normal

Throttle Seconds: 10

OID: eagleXgDiameterSupportedAppIdsInconsistentNotify

Recovery:

A peer with multiple transport connections has established a connection and provided a list of supported Application IDs which does match a previously established connection. This could prevent Request messages from being routed uniformly over the peer's transport connections because the decision to route a message containing an Application ID is based upon the list of Application IDs supported on each transport connection. The list of Application IDs that the peer supports on each connection can be viewed as follows:
1. Navigate to Diameter > Maintenance > Connections.
2. Locate the relevant Peer Node and check the supported Application IDs.
If Application IDs are not the same for each connection (but should be) the Application ID for any connection can be refreshed by:
1. Navigate to Diameter > Maintenance > Connections.
2. Locate the relevant Connection.
3. Disable the Connection.
4. Enable the Connection.
If the problem persists, contact My Oracle Support (MOS).