Configuring the Charging SBR subresource mapping

CAUTION: Subresources must be configured after the CPA is activated.

This screen can be edited only once.

You must apply the configuration before enabling the CPA.

  1. Select CPA > Configuration > SBR Subresource Mapping.

    The CPA > Configuration > SBR Subresource Mapping page appears.

  2. Inspect the defaults for Subresource Ids.

    It should not be necessary to modify the defaults. The defaults are correct for a production deployment.

  3. If needed for setting up a testing environment, make changes to the configurations.

    If there is a Charging SBR Server Group that you do not intend to use (that is, not host a subresource), change the subresource ID to “Not Hosted”. This configuration would be used only in lab testing.

    Subresources must be numbered sequentially, starting with 0 and incremented by 1.

  4. Click Apply.

    This step is mandatory, even if no changes to the subresource Ids were made.

    A warning displays saying that this screen can be edited only once. The update will be rejected if subresources are not numbered sequentially starting with 0.

  5. Click Confirm to apply your changes.

Once the changes are confirmed, this page and the configurations for the Charging SBR on the Configuration > Server Groups page will be read only.

If you need to reconfigure subresources or Charging SBR server groups, contact the Customer Care Center for assistance.

Parent topic: SBR Subresource Mapping page