FSPM can be configured for static or round-robin load balancing. You can also configure load balancing separately for each LUN.
In static load balancing, the software selects the best available path and all commands are sent over that path until the path is no longer operational or a better path becomes available. Then, a failover to another appropriate path is initiated.
To configure round-robin or static load balancing through Oracle FS System Manager (GUI), refer to the Oracle Flash Storage System Administrator’s Guide for additional information.
Various Windows configuration tools report the load balancing settings for multi-pathed LUNs and provide options to modify the settings. Static load balancing is reported as Fail Over Only and round-robin load balancing as Round Robin With Subset.
You can use the GUI or CLI to change these load balancing settings from the Oracle FS System or you can change them from the host using Windows applets or WMI processes.
For Pillar Axiom storage system, if you change load balancing settings from the host and leave the FSPM control path connection communicating with the Pilot, the Pillar Axiom can override your changes at the host at any time. Running FSPM without a control path connection ensures that the Pillar Axiom cannot override your changes at the host, but other control path functions are not available
For Oracle FS System, you can change the load balancing settings on the Oracle FS System or on the host and regardless of where the settings are changed, the settings are updated on both the Oracle FS System and the host.