Drive Enclosure Components

When replacing a component, you must know its part number and whether it is hot serviceable. Having that information helps you to order the correct replacement component and to determine whether you can replace the component yourself. To locate part numbers, open Oracle System Handbook (https://support.oracle.com/handbook_private/index.html). The part numbers are listed in the Oracle FS1 Flash Storage System components list.

The Drive Enclosure chassis is a field replaceable unit (FRU). The remaining components of both Drive Enclosure types are customer replaceable units (CRU). Drive Enclosure CRUs are hot serviceable.

WARNING: Do not power‑cycle a Drive Enclosure. Power‑cycling a Drive Enclosure impacts the primary and secondary data paths in the Drive Enclosure and puts user data at risk.
The following figure shows the CRUs in the DE2-24P Drive Enclosure.
Figure 1 DE2-24P Drive Enclosure CRUs DE2-24P Drive Enclosure CRUs 
Legend
1 Drives 4 I/O module 0
2 Power cooling module 0 5 I/O module 1
3 Power cooling module 1  
The following figure shows the CRUs in the DE2-24C Drive Enclosure.
Figure 2 DE2-24C Drive Enclosure CRUs DE2-24C Drive Enclosure CRUs 
Legend
1 Drives 4 I/O module 0
2 Power cooling module 1 5 I/O module 1
3 Power cooling module 2  

The following table provides a summary of the Drive Enclosure components.

Table 1 Drive Enclosure component descriptions
Drive Enclosure component Component Type Hot serviceable

Chassis for the DE2-24P Drive Enclosure

FRU

No

Chassis for the DE2-24C Drive Enclosure

FRU

No

Two I/O modules (EBOD modules)

CRU

Yes

Two power cooling modules

CRU

Yes

Drive Enclosure drives are customer replaceable and hot serviceable. The Oracle FS System release 6.1 supports the following drives:
Note: The list of supported drives can change. Refer to the release notes for your release of the Oracle FS System for the corresponding list of supported drives.
Table 2 Release 6.1 supported drives

Drives and configurations

Drive Enclosure type

  • 2.5-inch (6.35-cm) SAS-2 small form factor (SFF) HDDs, 300 GB

  • 24 drives in a DE2-24P Drive Enclosure

DE2-24P Drive Enclosure

  • 2.5-inch (6.35-cm) SAS-2 SFF HDDs, 900 GB

  • 24 drives in a DE2-24P Drive Enclosure

DE2-24P Drive Enclosure

  • SSDs, 400 GB

  • Seven or 13 drives in a DE2-24P Drive Enclosure

DE2-24P Drive Enclosure

  • SSDs, 1.6 TB

  • Seven, 13, or 19 drives in a DE2-24P Drive Enclosure

DE2-24P Drive Enclosure

  • 3.5-inch (8.89-cm) SAS-2 large form factor (LFF) HDDs, 4 TB

  • 24 drives in a DE2-24C Drive Enclosure

DE2-24C Drive Enclosure