Lower the Drive Compartment

  1. Rotate the drive compartment and backplane back into position inside the Controller and ensure that the alignment pins engage.
    Note: To confirm that the backplane is locked into position, listen for an audible click or feel the backplane engage with the Controller.
  2. Secure the backplane inside the Controller by inserting the four Phillips Number 2 thumb screws on the four sides of the backplane and tightening them using a Phillips Number 2 screwdriver.
  3. Reconnect all the cables that had been previously disconnected from the backplane.
    Cables that must be reconnected include:

    • SATA or drive cable

    • NV-DIMM cable

    • Motherboard to HDD backplane cable

    Figure 1 Reconnect cables to the backplane Reconnect cables to the backplane 
    Legend
    1 SATA or drive cable
    2 NV-DIMM cable
    3 Drive compartment
    4 Backplane boards
    5 Motherboard to HDD backplane cable

Copyright © 2006, 2015, Oracle and/or its affiliates. All rights reserved.  Legal Notices