Navigation:
Actions from this page allow you to manage the host on the system.
Identifies the name of the SAN host entry.
Identifies the connection status between the Controller and initiator port. The status might indicate masked Controller ports or disabled protocols.
Connected
Connected, Masked
Connected, Masked, Protocol Disabled
Connected, Partially Masked
Connected, Partially Masked, Some Protocols Disabled
Connected, Protocol Disabled
Connected, Some Protocols Disabled
Not Connected
Identifies the number of LUNs that are mapped to that particular SAN host either because of specific mapping or because the LUN is available to all SAN hosts.
Identifies certain global characteristics associated with the Oracle FS Path Manager (FSPM).
Identifies whether FSPM is communicating, or if it is not registered.
Indicates that the host control path is logged into the Pilot. Communicating status is required for the FSPM control path to report path status, configure load balancing, and use the Oracle FS System to collect FSPM diagnostic logs.
The FSPM host control path has previously logged in to the Pilot, but it is not currently logged in.
A control path from an FSPM host with this name has never logged in to the Pilot.
Identifies the version of the FSPM that is installed and running on the SAN host.
Identifies the IP address of the SAN host. The system uses this address to exchange management requests and responses with the FSPM that is installed on the host. If FSPM is not installed, this field displays N/A.
Identifies an alternative friendly name that is assigned to the host port.