Navigation:
Identifies the name of the Controller.
Identifies the Controller HBA slot number.
Identifies the HBA port number.
Identifies the HBA connection status.
Connected
Not connected
Offline
Indicates the type of HBA.
Indicates the port transmission speed in Gigabits each second.
Indicates the maximum speed of the port.
Identifies the unique identifier of the HBA port.
Identifies the iSCSI target portal group tag that is assigned to the port.
Indicates the iSCSI port link up status.
No
Yes
Indicates the iSNS client status for the iSCSI port.
Access lost
Established
In progress
Unknown
Indicates the minimum number of bytes supported by the maximum transmission unit (MTU).
Indicates the maximum number of bytes supported by the maximum transmission unit (MTU).
Identifies the configuration method that the Oracle FS System uses to obtain the IP address of the HBA port.
Indicates that the DHCP server automatically assigns the IP addresses to network clients.
Indicates that a permanent IP address is assigned to the network client.
Identifies the IP address that is assigned to the Oracle FS System.
Identifies the netmask that is assigned to the Oracle FS System.
Identifies the gateway IP address that is assigned to the Oracle FS System.
Identifies the Transmission Control Protocol (TCP) port number that is configured on the iSCSI port.
Signifies whether a virtual LAN (VLAN) has been defined for the iSCSI network.
Identifies the group portal tag number.
Identifies the maximum transmission unit (MTU) value for the Controller node.
Identifies the small form-factor pluggable (SFP) device port status.
Enabled 1 Gb
Enabled 2 Gb
Enabled 4 Gb
Enabled 8 Gb
Enabled 10 Gb
Enabled 16 Gb
No SFP
Incorrect Speed
Read Error
Incorrect Type
Loss of Sync
Other
Identifies the types of SFP transceiver interface devices used for data path traffic between the customer network switches and the Controllers.
Identifies the SFP device manufacturer.
Identifies the SFP device part number.
Identifies the SFP device revision number.