Navigation:
Identifies a descriptive name that is assigned to a hardware component.
Indicates the model number of the Drive Enclosure in which the drive resides.
Indicates the serial number of the selected Drive Enclosure.
Indicates the unique identifier (the World Wide Name) of the selected Drive Enclosure.
Indicates whether data protection operations, such as copyback, copy-away, and rebuild run in the background, as necessary. This option is deselected under the direction of Oracle Customer Support or as directed in a My Oracle Support (MOS) Knowledge Article.
Indicates the Drive Enclosure components that are replaceable.
Provides the operational state of the Drive Enclosure chassis. Oracle FS System Manager (GUI) displays a status icon followed by the chassis state.
The chassis is operating normally.
The system is unable to read the chassis state.
Provides the operational state of the drive in the drive group. Oracle FS System Manager (GUI) displays a status icon followed by the drive state.
The drive is a member of the drive group.
The drive is operating normally, but is not a member of a drive group.
The drive is starting up.
The system has detected a failure on the drive and is currently copying the data to a target drive. The drive state changes to Failed when copying is complete.
The system has detected a failure on another drive and is currently copying the data to this target drive.
An active spare drive is copying data to this drive.
The connection to the drive is limited to only a single Controller.
The drive is not a member of this drive group. Accept this drive using the associated System Alert to make the drive a member of the drive group.
The drive is not found in the Drive Enclosure.
The drive is a target of a rebuild operation for a drive group.
The drive has failure history, but is now online and is not a member of a drive group.
The drive has failure history. The drive is now online and is a member of a drive group.
The system is in shutdown mode and cannot access the drive.
The system is unable to read the drive state.
The drive has experienced a failure.
The drive is currently being restored.
Provides the operational state of the I/O module in the drive group. Oracle FS System Manager (GUI) displays a status icon followed by the I/O module state.
The I/O module is operating normally.
The I/O module is offline.
The I/O module is not found in the Drive Enclosure.
The system is unable to read the I/O module state.
The I/O module has experienced a failure.
Provides the operational state of the Drive Enclosure power cooling module. Oracle FS System Manager (GUI) displays a status icon followed by the power cooling module state.
The power cooling module is operating normally.
The system reports that the power cooling module is failed or is disabled.
The power cooling module is not found in the Drive Enclosure.
The power cooling module is functioning but shows signs of failure.
The system is unable to read the power cooling module state.
The power cooling module has experienced a failure.
Indicates the number that uniquely identifies the chassis within the Drive Enclosure.
Indicates the operational state of the component.
Indicates the manufacturer part number of the component.
Indicates the serial number of the component.
Indicates the operational state of the drive.
Indicates the manufacturers model number of the drive.
Indicates the serial number of the drive.
Indicates the firmware version number of the drive.
Indicates the Drive Enclosure slot number where the drive is installed.
Specifies the category of physical media that comprises the drive group.
Specifies that the data is stored on solid state drives (SSDs) that are optimized for the performance of balanced read and write operations.
Specifies that the data is stored on SSDs that are optimized for the performance of capacity and for read operations. The write performance for this Storage Class is sacrificed somewhat to achieve the optimizations for read performance and for capacity.
Specifies that the data is stored on high-speed hard disk drives (HDDs). This Storage Class sacrifices some capacity to reduce the access time and the latency of the read operations and of the write operations.
Specifies that the data is stored on high-capacity, rotating HDDs. This Storage Class optimizes capacity at some sacrifice of speed. For a storage system that does not include tape storage as an option, this Storage Class always provides the lowest cost for each GB of capacity.
Indicates the unique identifier of the Drive Enclosure.
Indicates the storage capacity of the drive.
(SSD only) Indicates the remaining months in the life of the drive.
Indicates the number that uniquely identifies the I/O module within the Drive Enclosure.
Indicates the operational state of the I/O module.
Indicates the manufacturer part number of the I/O module.
Indicates the serial number of the I/O module.
Indicates the firmware version number of the I/O module.
Indicates the operational state of the Power Cooling Module.
Indicates the manufacturer model number of the Power Cooling Module.
Indicates the serial number of the Power Cooling Module.
Indicates the number of cooling fans in the Power Cooling Module.
Indicates the number of failed cooling fans in the Power Cooling Module.