enclosure

Performs maintenance and troubleshooting operations on the Drive Enclosures and performs hardware replacement procedures.

SYNOPSIS

enclosure { [ ‑autoEnclosureOps | ‑beacon | ‑clearDriveHistory | ‑completeFru | ‑download | ‑list | ‑modify | ‑replaceFru | ‑setDisplayNumbers ] | [ ‑usage | ‑help ] }

DESCRIPTION

The enclosure command performs the following operations:

Obtains status and environmental data
Modifies the number that is displayed on the chassis
Prepares the Oracle FS System for Drive Enclosure repair and maintenance
Notifies the Oracle FS System that a FRU replacement procedure has been completed

Note: The enclosure command performs maintenance operations on individual drives. The drive_group command performs operations on the sets of drives. An Oracle Customer Support representative might instruct you to use the information in the system alerts and events to determine when to run an enclosure command or when to run a drive_group command.

Note: In most instances, when replacing a FRU, you use Guided Maintenance, not the Oracle FS CLI. In rare instances, however, an Oracle Customer Support representative might direct you to use the FSCLI. When running the enclosure commands, follow the instructions that are provided by Oracle Customer Support.

SUBCOMMANDS

‑autoEnclosureOps: Disables or enables the automatic management operations that run in the background on the specified Drive Enclosure.
‑beacon: Flashes the LEDs for a specific FRU in the Drive Enclosure.
‑clearDriveHistory: Clears the failure history that is associated with the specified drive slot.
‑completeFru: Completes the FRU replacement procedures to bring the replaced hardware online.
‑download: Returns statistics and diagnostic information for a particular I/⁠O module (IOM).
‑list: Returns information about one or more Drive Enclosures.
‑modify: Changes the configuration of a Drive Enclosure.
‑replaceFru: Prepares the specified FRU for replacement.
‑setDisplayNumbers: Loads a file that contains the display numbers of each Drive Enclosure in the Oracle FS System.

EXAMPLE

Task

Identify a failed drive that was prepared for replacement by flashing all the LEDs in the Drive Enclosure except for the LEDs of the failed drive.

Parameters

The name of theDrive Enclosure preceded by a forward slash: /⁠⁠⁠ENCLOSURE-01
The slot number of the failed drive: 22

$ fscli enclosure ‑beacon ‑enclosure /⁠ENCLOSURE-01 ‑reverseBeacon ‑diskDrive 22