This chapter discusses how to configure and deploy the Siebel CRM Integration Pack for Oracle Order Management: Order to Cash (Order to Cash: Siebel CRM - EBS PIP).
This chapter includes the following sections:
To run AIA Pre-Built Integrations Installer you must have Oracle Data Integrator (ODI) access with Supervisor privileges.
ODI is used by the O2C PIP for the initial load flows. You can skip this section if you do not plan to run the initial load flows. If you intend to run the ODI based initial loads, review the details in this section and perform tasks accordingly.
For installation purposes, the ODI software must reside at the same server where Foundation Pack is installed. Once the PIP installation is complete, the ODI software can be installed onto another server (if desired) connecting to the master and work repositories used during the PIP installation.
You can use an existing master repository if it exists on an Oracle database and its ID is not 0. If the ID is 0, AIA advises you to create a another master repository.
You can use an existing work repository if it exists on an Oracle database and its ID is not 778. If the ID is 778, AIA advises you to create a another repository and not to use 778 as the Work Repository ID.
Table 26-1 details a list of ids you must avoid when creating master and work repositories.
Master Repository Prohibited IDs | Work Repository Prohibited IDs |
---|---|
666 |
667 |
611 |
711 |
999 |
516 |
515 |
126 |
When you run the DCW, it inserts or updates the ODI artifacts into these repositories.
AIA recommends that you make a backup copy of master and work repositories before you start the installation process.
For information about creating Oracle Data Integrator Master and Work repositories, see Oracle Fusion Middleware Developer's Guide for Oracle Data Integrator, "Administering the Oracle Data Integrator Repositories."
Perform the following steps to apply the required patches to your ODI 11.1.1.5.0.
To install prerequisite installer patch #10288265:
Access My Oracle Support: https://support.oracle.com
Navigate to the Patches & Updates tab
In the Patch Name or Number field, write 10288265
Select your platform
Click Search
Download and install patch #10288265
Access My Oracle Support: https://support.oracle.com
Navigate to the Patches & Updates tab
In the Patch Name or Number field, write 12837214
Select your platform
Click Search
Download and install patch #12837214
After applying the patches, launch the ODI Installer:
Go to Topology.
Go to Physical Architecture.
Find the XML technologies and expand it.
You should see data sources for all DVM's used in your ODI flows.
Select each DVM data source.
Go to the JDBC tab.
Append this to the end of the URL "&back_compat_specific_keywords=true"
Test the data source to make sure the connection is successful.
Save your changes.
For a screenshot of this screen in the ODI Installer, see Appendix B, "Oracle Data Integrator Screen".
The DCW screens prompt you to enter the data required for successful configuration of the Order to Cash: Siebel CRM - EBS PIP. Enter the details of the Order to Cash: Siebel CRM - EBS PIP screens below, take a printout and keep it ready when you run the DCW. This action enables faster and error free configuration.
All artifacts associated with the PIP infrastructure components deploy to the PIP server. This screen contains the following fields:
Table 26-2 PIP Server Details Screen Fields
Field | Description |
---|---|
Admin Host Name |
Specifies where the admin server resides. This can be a remote server or the same system where the AIA Pre-Built Integrations Installer is launched. Example: The Admin Host Name is _________________________________ |
Admin Port |
This is the port number on which the Weblogic Admin server is started. To find this value contact the WebLogic administrator. Example: The Admin Port is _____________________________________ |
Domain Name |
This is WebLogic server domain corresponding to the Admin Server. Example: The Domain Name is _______________________________ |
Admin User |
This value is the WebLogic admin user name. To find this value contact your WebLogic administrator. The Admin User is __________________________________ |
Admin Password |
This value is the WebLogic admin password. To find this value contact your WebLogic administrator. The password is _____________________________________ |
Managed Server |
After you enter the Admin Host Name, Admin Port and Admin User, this field populates with managed servers for the domain. Select the managed server from the list. If you are deploying the PIP to a SOA cluster, you should select the cluster name in this field. The Managed Server is _______________________________ |
Managed Port |
This field is automatically updated after you select the managed server. If you have configured a SOA Cluster, the SOA Cluster port appears in the list. |
Use this screen to enter details related to your Oracle E-Business Suite server instance.
The screen contains the following fields:
Table 26-3 Oracle E-Business Suite Server Details Screen Fields
Field | Description |
---|---|
E-Business Suite Host Name |
Specifies the fully qualified system name of the Oracle E-Business Suite application. Example: E-Business Suite Host Name is ___________________________ |
E-Business Suite Port |
This value is the Oracle E-Business Suite application port. To find this value, contact your administrator. Example: E-Business Suite Port is _______________________________ |
E-Business Suite User Name |
To find this value, contact your administrator. E-Business Suite User Name is __________________________ |
E-Business Suite Password |
To find this value, contact your administrator. E-Business Suite Password is ___________________________ |
Workflow Business Event System Name |
This is the Workflow Business Event System Name of E-Business Suite Server. For example: Workflow Business Event System Name is _________________ |
E-Business Suite Version |
This is the version of the E-Business Suite Application. |
Use this screen to enter details related to your Oracle E-Business Suite database instance. The screen contains the following fields:
Table 26-4 Oracle E-Business Suite Database Details Screen Fields
Field | Description |
---|---|
E-Business Suite Database Host |
Specifies the system name. To find this value, contact the database administrator. Example: E-Business Suite Database Host is ________________________ |
E-Business Suite Database Port |
To find this value, contact the database administrator. Example: E-Business Suite Database Port is _______________________ |
E-Business Suite Database Username |
To find this value, contact the database administrator. Example: Note: Ensure that the database user name is always entered in uppercase. Else the ODI based initial loads may result in errors. E-Business Suite Database Username is ___________________ |
E-Business Suite Database Password |
To find this value, contact the database administrator. E-Business Suite Database Password is ____________________ |
E-Business Suite Database SID (System ID) |
To find this value, contact the database administrator. Example: E-Business Suite Database SID is _________________________ |
Database Schema |
To find this value, contact the database administrator. Example: Database Schema is __________________________________ Note: All the database credentials are used for creating the connection pool URL (universal resource locator) and data source URLs. Ensure that the database schema name is always entered in uppercase. |
Use this screen to enter details related to your OTM server instance. If the Shipping Charges flow of the Order to Cash: Siebel CRM - EBS PIP to Cash PIP is not being used, these details are optional. The screen contains the following fields:
OTM System Name and OTM System Version fields are optional.
Table 26-5 Oracle Transportation Management (OTM) Server Details Screen Fields
Field | Description |
---|---|
OTM Host Name |
Specifies the fully qualified system name of the OTM application. Example: OTM Host Name is ___________________________________ |
OTM HTTP Port |
This value is the OTM port. To find this value, contact your administrator. Example: OTM HTTP Port is ______________________________________ |
OTM User Name |
To find this value, contact your administrator. OTM User Name is ____________________________________ |
OTM Password |
To find this value, contact your administrator. OTM Password is _____________________________________ |
OTM System Name |
To find this value contact your administrator. OTM System Name is _________________________________ |
OTM System Version |
To find this value contact your administrator. OTM System Version is _________________________________ |
Use this screen to enter details related to your OTM database instance. The screen contains the following fields:
Table 26-6 Oracle Transportation Management (OTM) Database Details Screen Fields (Optional)
Field | Description |
---|---|
OTM Database Host |
Specifies the fully qualified system name of the OTM database. Example: OTM Host Name is ___________________________________ |
OTM Database Port |
This value is the OTM database port. To find this value, contact your database administrator. Example: OTM HTTP Port is ______________________________________ |
OTM Database User Name |
To find this value, contact your database administrator. OTM User Name is ____________________________________ |
OTM Database Password |
To find this value, contact your database administrator. OTM Password is _____________________________________ |
OTM Database SID |
This value is OTM Database System ID. To find this value contact your database administrator. OTM Database SID is _____________________________ |
Use this screen to enter details related to your Siebel CRM server instance. The screen contains the following fields:
Table 26-7 Siebel CRM Server Details Screen Fields
Field | Description |
---|---|
Siebel Host name |
Specifies the fully qualified system name of the Siebel CRM application. Example: Siebel Host name is ____________________________ |
Siebel HTTP Port |
This is the value of the Siebel CRM application port. To find this value, contact your administrator. Example: Note: Enter Siebel HTTP Port is _____________________________. |
Siebel EAI Application User |
This value is the Siebel integration user used to make EAI web service calls. To find this value, contact your administrator. Siebel EAI Application User is __________________________ |
Siebel EAI Application Password |
To find this value, contact the database administrator. Siebel EAI Application Password is ________________________ |
Siebel Enterprise Server Name |
To find this value, contact the database administrator. Siebel Enterprise Server Name is _________________________ |
Siebel Version |
This is the version of the Siebel CRM application. Valid value for Order to Cash: Siebel CRM - EBS PIP is 8.0.0.8 and 8.1.1.3. Other versions are not supported for this release. |
Use this screen to enter details related to your Siebel CRM database instance. The screen contains the following fields:
Table 26-8 Siebel CRM Database Details Screen Fields
Field | Description |
---|---|
Siebel Database Host |
Specifies the system name. To find this value, contact the database administrator. Example: Siebel Database Host is _________________________________ |
Siebel Database Port |
To find this value, contact the database administrator. Example: Siebel Database Port is _________________________________ |
Siebel Database Username |
Specifies a database user that has access to loading the EIM tables Siebel. To find this value, contact the database administrator. Example: Note: Ensure that the database user name is entered with the correct case. Else the ODI based initial loads may result in errors. Siebel Database Username is ____________________________ |
Siebel Database Password |
To find this value, contact your administrator. Siebel Database Password is _____________________________ |
Siebel Database SID |
To find this value, contact the database administrator. Example: Siebel Database SID is _________________________________ |
Oracle Data Integration Access Information is captured in three screens. Use these screens to enter details to access the Oracle Data Integrator (ODI). The screens contain the following fields:
The ODI screens are optional and they help you capture the ODI details and are only required you intend to run the ODI based Initial Data Loads for the PIP. See Oracle Application Integration Architecture Siebel CRM Integration Pack for Oracle Order Management: Order to Cash for details on how to deploy and execute these Initial Loads.
Table 26-9 Oracle Data Integrator Access Details Screen Fields
Field | Description |
---|---|
Path to Oracle Data Integrator |
This value is the fully qualified path to the ODI HOME, including the agent folder in the oracledi directory. The default is the environment variable ODI_HOME. Linux example: Path to ODI is ____________________________ Note: The existence of the ODI software is validated by checking whether odiparams.sh (or .bat) exists in the ODI_HOME/agent/bin directory. |
ODI User |
Enter the user name to access ODI. Example: ODI user is ______________________________ |
ODI Password |
Enter the password to access ODI. Example: ODI password is ___________________________ |
Path for exported DVMs |
Enter the path to the directory to export domain value mappings (DVMs). Example: One of the steps for setting up the PIP is to export some DVMs to a location. The Installer must have this location to configure ODI artifacts during the install. It is recommended to choose this location in the same server where ODI software runs. Path for Exported DVMs is _______________________ |
Use this screen to enter details to access the ODI master repository. The screen contains the following fields:
Table 26-10 Oracle Data Integrator Master Repository Details Screen Fields
Field | Description |
---|---|
Database Host Name |
To find this value, contact your database administrator. Example: ODI Master Repository Database Host Name is _________________ |
Database Port Number |
To find this value, contact your database administrator. Example: ODI Master Repository Database Port Number is_________________ |
Database Username |
To find this value, contact your database administrator. Example: ODI Master Repository Database Username is _________________ |
Database Password |
To find this value, contact your database administrator. Example: ODI Master Repository Database Password is _________________ |
Database SID |
To find this value, contact your database administrator. Example: ODI Master Repository Database SID is _________________ |
The install process imports the Order to Cash: Siebel CRM - EBS PIP ODI artifacts into an ODI work repository. You can provide an existing ODI work repository or provide an empty one. It is recommended to use an empty repository.
Use this screen to enter details related to the ODI work repository. The screen contains the following fields:
Table 26-11 Oracle Data Integrator Work Repository Details for Order to Cash: Siebel CRM - EBS PIP Screen Fields
Field | Description |
---|---|
ODI Work Repository Name |
Enter the name you gave to the ODI work repository for Order to Cash: Siebel CRM - EBS PIP artifacts. Example: ODI Work Repository Name is: _________________________ |
ODI Work Repository ID |
Enter the ID number that you used for the ODI work repository. It should be between 1 and 899. Example: Do not use 900. Also do not use the ID used for other work repositories. ODI Work Repository ID is: ______________ |
This PIP uses the Session Pool Manager utility to interact with Siebel web services. If the AIA server must invoke Siebel web services through a proxy server, fill in the values in this screen. If no proxy server is involved, these values can be left blank.
Use this screen to enter details related to your Session Pool Manager.
The screen contains the following fields:
Table 26-12 Session Pool Manager Screen Fields
Field | Description |
---|---|
Proxy Host URL |
Specify the proxy host location. Example: Proxy Host URL is _________________________________ |
Proxy Port |
Specify the proxy port. Example: Proxy Port is _________________________________ |
For information about Session Pool Manager, see Oracle Application Integration Architecture Process Integration Pack Utilities Guide, "Session Pool Manager".
This section discusses the PIP configuration and deployment process. There are two steps:
Configure your PIP using the deployment DCW.
Deploy the PIP to the Fusion Middleware server.
The screens that appear prompt you to enter the data that is required for successful configuration of the Order to Cash: Siebel CRM - EBS PIP. Keep the completed worksheets of the Order to Cash: Siebel CRM - EBS PIP screens ready before you launch the DCW.
By default OTM is not defined as a participating application for the Order to Cash: Siebel CRM - EBS PIP in the DCW. If you intend to use the Shipping Charges flow of the Order to Cash: Siebel CRM - EBS PIP, define OTM as participating application.
Define OTM as a participating application for DCW (Optional)
To define OTM as participating application:
Open <AIA_HOME>/pips/PIPManifest.xml.
Find the PIP OrderToCash, and in the participating application section for this PIP, uncomment the entry for OTM.
Note:
If you are harvesting content to OER, perform the first three steps. Else start from step 4.To configure the Order to Cash: Siebel CRM - EBS PIP:
Navigate to /slot/emsxxxx/oracle/Middleware/user_projects/domains/soa_domain/bin/ and open setDomainEnv.sh for Linux based systems and setDomainEnv.bat for Microsoft Windows.
Replace WLS_JDBC_REMOTE_ENABLED="-Dweblogic.jdbc.remoteEnabled=false" with WLS_JDBC_REMOTE_ENABLED="-Dweblogic.jdbc.remoteEnabled=true".
Restart the server.
Navigate to <AIA_Instance>/bin and run the command source aiaenv.sh
for Linux based systems and aiaenv.bat
for Microsoft Windows to configure installation environment.
Navigate to <AIA_HOME>/bin and run the command ./aiaconfig.sh
for Linux based systems and aiaconfig.bat
for Microsoft Windows.
This launches the AIA DCW.
Click Next.
Select the Order to Cash: Siebel CRM - EBS PIP.
If you intend to configure the ODI details for Order to Cash Initial Loads, also select the Order to Cash: Siebel CRM - EBS Initial Loads PIP.
Click Next.
To specify PIP Server details:
Enter information related to your PIP server in the PIP Server Details screen.
Click Next.
To specify Oracle E-Business Suite server details:
Enter your Oracle E-Business Suite Server information in the E-Business Suite Server Details screen.
Click Next.
To specify Oracle E-Business Suite database details:
Enter your Oracle E-Business Suite Database connection information in the E-Business Suite Database Details screen.
Click Next.
Note:
The OTN screens appear only if you have uncommented OTN as participating application in PIPManifest.xml.To specify details of the Oracle Transportation Management (OTM) Server:
Enter your OTM Server information in the Oracle Transportation Management (OTM) Server Details screen.
Click Next.
To specify details of the Oracle Transportation Management (OTM) Database:
Enter your OTM Server information in the Oracle Transportation Management (OTM) Database Details screen.
Click Next.
To specify Siebel CRM server details:
Enter your Siebel CRM connection information in the Application Details - Siebel CRM screen
Click Next.
To specify Siebel CRM database details:
Enter your Siebel CRM Database connection information in the Siebel CRM Database Details screen.
Click Next.
Note:
The ODI screens appear if you have selected the Order to Cash: Siebel CRM - EBS Initial Loads PIP.To specify Oracle Data Integrator access details:
Enter information about your ODI access installation in the Oracle Data Integrator Access Information screens.
ODI access information is captured in three screens. Enter the following information in the screens.
Specify the ODI Home.
Click Next.
Enter ODI User and ODI Password.
Click Next.
Specify the Path for exported DVMs.
Click Next.
To specify Oracle Data Integrator master repository details:
Enter information about your ODI master repository installation in the Oracle Data Integrator Master Repository screen.
Click Next.
To specify Oracle Data Integrator Work Repository Details for Order to Cash:
Enter information about your ODI work repository installation in the Oracle Data Integrator Work Repository Details for Order to Cash screen.
Click Next.
To specify Session Pool Manager details:
Enter information related to your Session Pool Manager installation in the Session Pool Manager Details screen.
Click Next.
Review the configuration information on the Configuration Summary screen.
Note:
If you want to make changes to the configuration, use the navigation pane on the left and select the screen you want to edit.You can create a response file based on the input provided in the DCW and use it in future when you want to deploy the PIP. You can configure using the steps described in Configuring using the Response File. Click Save Response File and save the response file with the name and location of your choice.
Click Configure to accept the configuration.
The system displays progress of configuration in the Configuration Progress screen.
The system displays any warnings or errors as necessary. You can review the configuration log for additional details. The configuration log location is displayed in Configuration Progress screen.
When configuration process finishes without errors, the AIA DCW displays the Configuration Complete screen.
Click Finish to close the DCW.
To configure using the response file:
Open the response file.
When you create a response file through OUI, passwords get stored as <SECURE>.
Replace the password fields with actual passwords in the response file.
Navigate to <AIA_Instance>/bin and run the command source aiaenv.sh
for Linux based systems and aiaenv.bat
for Microsoft Windows to configure the environment.
Navigate to <AIA_HOME>/bin and run the command ./aiaconfig.sh <Response File Location and Name>
for Linux based systems and aiaconfig.bat <Response File Location and Name>
for Microsoft Windows.
To deploy the PIP to Fusion Middleware server, run the command specific to your platform:
Navigate to <AIA_Instance>/bin and run the command source aiaenv.sh
for Linux based systems and aiaenv.bat
for Microsoft Windows to configure the environment.
Run the command for your platform.
Note:
When you copy and paste the command in the command line, ensure that there is space between .xml
and -
. Ensure that there is space between these two when you run undeployment command too.Table 26-13 Deployment Commands for the Order to Cash: Siebel CRM - EBS PIP
Platform | Deployment Command |
---|---|
Linux Solaris SPARC IBM AIX Based Systems HP-UX |
ant -f <AIA_HOME>/Infrastructure/Install/AID/AIAInstallDriver.xml -DDeploymentPlan=<AIA_HOME>/pips/OrderToCash/DeploymentPlans/OrderToCashDP.xml -DPropertiesFile=<AIA_HOME>/aia_instances/<aia_instance>/config/AIAInstallProperties.xml -DSupplementaryDeploymentPlan=<AIA_HOME>/pips/OrderToCash/DeploymentPlans/OrderToCashSupplementaryDP.xml -DDeploymentPolicyFile=<AIA_HOME>/pips/OrderToCash/DeploymentPlans/OrderToCashConditionalPolicy.xml -l <AIA_HOME>/pips/OrderToCash/DeploymentPlans/OrderToCash.log |
Microsoft Windows |
ant -f <AIA_HOME>\Infrastructure\Install\AID\AIAInstallDriver.xml -DDeploymentPlan=<AIA_HOME>\pips\OrderToCash\DeploymentPlans\OrderToCashDP.xml -DPropertiesFile=<AIA_HOME>\aia_instances\<aia_instance>\config\AIAInstallProperties.xml -DSupplementaryDeploymentPlan=<AIA_HOME>\pips\OrderToCash\DeploymentPlans\OrderToCashSupplementaryDP.xml -DDeploymentPolicyFile=<AIA_HOME>\pips\OrderToCash\DeploymentPlans\OrderToCashConditionalPolicy.xml -l <AIA_HOME>\pips\OrderToCash\DeploymentPlans\OrderToCashDP.log |
Note:
In Windows 2008, 2008 R2 and Vista, run the command prompt as an administrator (elevated mode). If the command prompt is invoked in normal mode, the PIPs are not displayed.Review the log file in the location specified in the command to verify successful deployment.
Oracle AIA ships artifacts in AIA Lifecycle Workbench which can be used in your integrations. These artifacts are created using FMW technologies such as BPEL and Mediator and are natively supported by AIA Foundation Pack tools such as Project Lifecycle Workbench, Harvester, Deployment Generator, AIA Deployment Driver (ADD). These are called native artifacts and they include SOA artifact types such as composites, DataSources, DVM, xRef, and so on. These artifacts can be modified or new natively supported artifacts can be added using the AIA Lifecyle Workbench and a BOM.xml file can be generated.
AIA PIP development teams, most often, also require deployment of artifact types that are beyond what is supported by the Project Lifecycle Workbench and AIA Harvester. For instance, integration may require artifacts such as, Java applications, Shell Scripts, ANT based build scripts which constitute part of integration landscape in addition to the artifacts that are delivered by AIA. AIA also supports deployment of these supplementary artifacts. However, you must modify and add new non native artifacts outside AIA Lifecycle Workbench.
For more information on deploying artifacts, see Oracle Fusion Middleware Developer's Guide for Oracle Application Integration Architecture Foundation Pack, "Generating Deployment Plans and Deploying Artifacts".
Perform the following tasks as part of postdeployment configurations for the Order to Cash: Siebel CRM - EBS PIP.
As part of this PIP implementation, review and perform a few application and PIP related configurations as described in Oracle Application Integration Architecture Siebel CRM Integration Pack for Oracle Order Management: Order to Cash, "Implementing the Order to Cash: Siebel CRM – EBS Process Integration Pack".
This PIP uses the Session Pool Manager utility. Configure Session Pool Manager after you install the PIP. For information on how to configure Session Pool Manager for your integration environment and needs, see Oracle Application Integration Architecture Process Integration Pack Utilities Guide, "Session Pool Manager".
To verify the Order to Cash: Siebel CRM - EBS PIP deployment:
Open the log files from the following location and look for warnings and error messages:
For Linux x86, Solaris SPARC (64-bit), HP-UX 11i (64 bit) and IBM AIX Based Systems (64-bit): Review the install log located at <AIA_HOME>/aia_instances/<instance name>/logs to verify whether the PIP is successfully installed.
For Microsoft Windows (32-bit): Review the install log located at <AIA_HOME>\aia_instances\<instance name>\logs to verify whether the PIP is successfully installed.
Confirm that the Order to Cash: Siebel CRM - EBS PIP services were installed.
Navigate to the Oracle Enterprise Manager Fusion Middleware Control (http://<server name>:<port number>/em/).
Log in with the server admin user name. For access details, contact the system administrator.
Expand Farm_soa_domain, SOA, soa-infra, Default and look for the following items:
AIASessionPoolManager
BulkLoadProductEbizReqABCSImpl
CalculateShippingChargeSalesOrderSiebelReqABCSImpl
CheckATPSalesOrderSiebelReqABCSImpl
ConfiguratorCopyConfigEbizAdapter
ConfiguratorUserLangSiebelAdapter
CreateAssetSiebelProvABCSImpl
CreateItemEbizEventConsumer
CreateItemInstanceEbizEventConsumer
CreateItemInstanceEbizReqABCSImpl
CreateProductEbizReqABCSImpl
CreateSalesOrderEbizProvABCSImpl
CreditCheckSalesOrderSiebelReqABCSImpl
CustomerPartyEBSV2
CustomerPartyOrchestrationEBSV2
CustomerPartyOrchestrationResponseEBSV2
CustomerPartyResponseEBSV2
ExplodeItemCompositionEbizAdapter
FetchATPScheduleSequenceEbizAdapter
GetItemValidationOrganizationEbizAdapter
GetItemValidationOrganizationOUEbizAdapter
GetOperatingUnitIVOrgEbizAdapter
GetSalesOrderEbizAdapter
GetSalesOrderLineShippingDetailsEbizAdapter
InstalledProductEBSV2
InterfaceCustomerToFulfillmentEBF
InterfaceSalesOrderToCustomerEBFV2
InterfaceSalesOrderToFulfillmentEBF
InterfaceSyncProductStructureEBF
ItemCompositionEBS
ItemCompositionOrchestrationEBS
ItemCompositionResponseEBS
ItemEBSV2
MergeAccountEbizEventConsumer
MergeAccountEbizReqABCSImpl
MergePartyEbizEventConsumer
MergePartyEbizReqABCSImpl
PaymentAuthorizationSalesOrderSiebelReqABCSImpl
ProcessCreditChargeAuthorizationEbizAdapter
ProcessCreditChargeAuthorizationEbizProvABCSImpl
ProcessCreditEligibilityEbizAdapter
ProcessCreditEligibilityEbizProvABCSImpl
ProcessQuoteSiebelJMSConsumer (applicable only for Siebel 8.0.x)
ProcessQuoteSiebelJMSProducer (applicable only for Siebel 8.0.x)
ProcessQuoteSiebelReqABCSImpl
ProcessQuoteSoapMsgSiebelJMSConsumer (applicable only for Siebel 8.1.x)
ProcessSalesOrderATPCheckEbizAdapter
ProcessSalesOrderATPCheckEbizProvABCSImpl
ProcessSalesOrderEbizAdapter
ProcessSalesOrderShippingChargeLogisticsProvABCSImpl
ProcessSalesOrderSiebelJMSConsumerV2 (applicable only for Siebel 8.0.x)
ProcessSalesOrderSiebelJMSProducerV2 (applicable only for Siebel 8.0.x)
ProcessSalesOrderSiebelReqABCSImplV2
ProcessSalesOrderSoapMsgSiebelJMSConsumer (applicable only for Siebel 8.1.x)
QueryCustomerPartyEbizAdapter
QueryCustomerPartyListEbizCreateAdapter
QueryCustomerPartyListEbizUpdateAdapter
QueryCustomerPartyListSiebelProvABCSImplV2
QueryItemCompositionEbizAdapter
QueryItemCompositionListEbizProvABCSImpl
QueryItemInstanceEbizAdapter (applicable only for E-Business Suite 11.x)
QueryItemInstanceEbizR12VersionAdapter (applicable only for E-Business Suite 12.x)
QueryMergeAccountEbizAdapter
QueryMergeOrgCustEbizAdapter
QueryPartyMergeEbizAdapter
QueryRelatedOrgCustEbizAdapter
QueryResponsibilityEbizAdapter
QuerySimpleItemAdapter
QuerySimpleItemBulkLoadAdapter
QuerySimpleItemUpdateAdapter
QueryStructureItemCompositionEbizAdapter
ReceivedPaymentEBS
RequestProductStructureSiebelJMSConsumer
RequestProductStructureSiebelJMSProducer
RequestProductStructureSiebelReqABCSImpl
SalesOrderEBSV2
SalesOrderOrchestrationEBSV2
SalesOrderOrchestrationResponseEBSV2
SalesOrderResponseEBSV2
SyncAccountSiebelAggregatorAdapter
SyncAccountSiebelReqABCSImpl
SyncAcctSiebelAggrEventConsumer
SyncAddressSiebelAggregatorAdapter
SyncBPSiebelAggregatorAdapter
SyncContactSiebelAggregatorAdapter
SyncContactSiebelReqABCSImpl
SyncContSiebelAggrEventConsumer
SyncCustomerPartyListEbizAdapter
SyncCustomerPartyListEbizEventConsumer
SyncCustomerPartyListEbizProvABCSImpl
SyncCustomerPartyListEbizReqABCSImpl
SyncCustomerPartyListPersonEbizAdapter
SyncCustomerPartyListSiebelProvABCSImpl
SyncCustomerSiebelEventAggregator
SyncItemCompositionListSiebelProvABCSImpl
SyncProductSiebelProvABCSImpl
SyncSalesOrderEbizProvABCSImpl
TransformAppContextEbizService
TransformAppContextLogisticsService
TransformAppContextSiebelService
UpdateAssetSiebelProvABCSImpl
UpdateItemEbizEventConsumer
UpdateItemInstanceEbizEventConsumer
UpdateItemInstanceEbizReqABCSImpl
UpdateProductEbizReqABCSImpl
UpdateSalesOrderEbizEventConsumer
UpdateSalesOrderEbizReqABCSImpl
UpdateSalesOrderSiebelProvABCSImpl
Verify whether Session Pool Manager is successfully installed and ensure that the Siebel server is active.
Log in to the Oracle Enterprise Manager Fusion Middleware Control (http://<server name>:<port number>/em/).
Expand Farm_soa_domain, SOA, soa-infra (soa_server1), Default and click AIASessionPoolManager on the left panel.
Click Test.
Enter Operation = Start
.
Under the collapsible section titled Security, select WSS Username Token and enter the WLS admin user name and password.
Enter Input Argumemt Host Id = SEBL_01
.
Click Test Web Service.
You should see a successful initialization response message. For more information and troubleshooting steps, see Oracle Application Integration Architecture Process Integration Pack Utilities Guide, "Session Pool Manager".
All SOA composites are protected by Global Policies provided by Foundation Pack as defined in the Security section of the Developer Guide. Additionally individual services for this PIP have locally attached security policies.
To validate locally attached security policies:
Log in to Oracle Enterprise Manager Fusion Middleware Control.
Navigate to WebLogic Domain, soa_domain, Web Services, Policies.
Verify Service Policy attachment.
Select Security from the Category list and Service Clients from the Applies To list, and click Search/Arrow.
Find the service policy in the list of policies.
Click the number in Attachment Count column.
This opens Usage Analysis screen.
Change the Subject Type list box to SOA Service.
Validate that all the composites are listed with local attachment to this service policy.
Verify Client Policy attachment
Navigate back to Policies screen.
Select Security
from the Category list and Service Endpoints
from the Applies To list, and click Search/Arrow to refresh the list of policies.
Find the client policy in the list of policies
Click the number in Attachment Count column.
This opens Usage Analysis screen.
Change the Subject Type list box to SOA Reference
.
Validate that all the composites are listed with local attachment to this client policy and attached to the correct references.
Table 26-14 Service Policy Attachments for Order to Cash: Siebel CRM - EBS PIP
Composite | Service Policy |
---|---|
AIASessionPoolManager |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
TransformAppContextSiebelService |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
TransformAppContextEbizService |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
TransformAppContextLogisticsService |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
Table 26-15 No Authentication Service Policy Attachments for Order to Cash: Siebel CRM - EBS PIP
Composite | Service Policy |
---|---|
RequestProductStructureSiebelJMSProducer |
oracle/no_authentication_service_policy |
ConfiguratorUserLangSiebelAdapter |
oracle/no_authentication_service_policy |
PaymentAuthorizationSalesOrderSiebelReqABCSImpl |
oracle/no_authentication_service_policy |
CreditCheckSalesOrderSiebelReqABCSImpl |
oracle/no_authentication_service_policy |
CalculateShippingChargeSalesOrderSiebelReqABCSImpl |
oracle/no_authentication_service_policy |
ProcessSalesOrderSiebelJMSProducerV2 (only applicable for Siebel 8.0.x) |
oracle/no_authentication_service_policy |
ProcessQuoteSiebelJMSProducer (only applicable for Siebel 8.0.x) |
oracle/no_authentication_service_policy |
SyncCustomerSiebelEventAggregator |
oracle/no_authentication_service_policy |
CheckATPSalesOrderSiebelReqABCSImpl |
oracle/no_authentication_service_policy |
Table 26-16 Saml Opt On Client Policy Order to Cash: Siebel CRM - EBS PIP
Composite | Reference | Client Policy |
---|---|---|
SyncCustomerSiebelEventAggregator |
SyncContactSiebelAggregatorAdapter |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
SyncCustomerSiebelEventAggregator |
SyncAddressSiebelAggregatorAdapter |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
SyncCustomerSiebelEventAggregator |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
SyncCustomerSiebelEventAggregator |
SyncBPSiebelAggregatorAdapter |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
SyncCustomerSiebelEventAggregator |
SyncAccountSiebelAggregatorAdapter |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
TransformAppContextSiebelService |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
TransformAppContextLogisticsService |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
TransformAppContextEbizService |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
TransformAppContextEbizService |
QueryRespEbizAdapter |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
Table 26-17 No Authentication Client Policy for Order to Cash: Siebel CRM - EBS PIP
Composite | Reference | Client Policy |
---|---|---|
SyncCustomerPartyListSiebelProvABCSImpl |
SWI_spcContact_spcService |
oracle/no_authentication_client_policy |
SyncCustomerPartyListSiebelProvABCSImpl |
SyncCustomerPartyListSiebelService |
oracle/no_authentication_client_policy |
SyncCustomerPartyListSiebelProvABCSImpl |
MergeCustomerPartyListSiebelService |
oracle/no_authentication_client_policy |
SyncAccountSiebelReqABCSImpl |
SWICustomerParty |
oracle/no_authentication_client_policy |
SyncContactSiebelReqABCSImpl |
SWIContactIO |
oracle/no_authentication_client_policy |
UpdateAssetSiebelProvABCSImpl |
SWIAssetManagementIO |
oracle/no_authentication_client_policy |
CreateAssetSiebelProvABCSImpl |
SWIAssetManagementIO |
oracle/no_authentication_client_policy |
ProcessSalesOrderSiebelReqABCSImplV2 |
SBLOrderUpsertService |
oracle/no_authentication_client_policy |
ProcessSalesOrderSiebelReqABCSImplV2 |
SWIOrderUpsertService |
oracle/no_authentication_client_policy |
QueryCustomerPartyListSiebelProvABCSImplV2 |
SWI_spcCustomer_spcParty_spcService |
oracle/no_authentication_client_policy |
UpdateSalesOrderSiebelProvABCSImpl |
SBLOrderUpsertService |
oracle/no_authentication_client_policy |
UpdateSalesOrderSiebelProvABCSImpl |
SWIOrderUpsertService |
oracle/no_authentication_client_policy |
UpdateSalesOrderSiebelProvABCSImpl |
SWIQuoteUpsertService |
oracle/no_authentication_client_policy |
ProcessQuoteSiebelReqABCSImpl |
SWIQuoteUpsert |
oracle/no_authentication_client_policy |
SyncProductSiebelProvABCSImpl |
SWIPromotionIntegration |
oracle/no_authentication_client_policy |
SyncProductSiebelProvABCSImpl |
SWIProductIntegration |
oracle/no_authentication_client_policy |
SyncItemCompositionListSiebelProvABCSImpl |
SWIProductIntegration |
oracle/no_authentication_client_policy |
ProcessSalesOrderShippingChargeLogisticsProvABCSImpl |
IntXmlService |
oracle/no_authentication_client_policy |
Table 26-18 Wss User Name Token Client Policy Attachments for Order to Cash: Siebel CRM - EBS PIP
Composite | Reference | Client Policy |
---|---|---|
InterfaceCustomerToFulfillmentEBF |
CustomerPartyOrchestrationErrorResponseEBSV2 |
oracle/wss_username_token_client_policy(AIABasicCredentials) |
InterfaceSalesOrderToCustomerEBFV2 |
SalesOrderOrchestrationErrorResponseEBSV2 |
oracle/wss_username_token_client_policy(AIABasicCredentials) |
InterfaceSalesOrderToFulfillmentEBF |
SalesOrderErrorEBSV2 |
oracle/wss_username_token_client_policy(AIABasicCredentials) |
InterfaceSalesOrderToFulfillmentEBF |
SalesOrderOrchestrationErrorResponseEBSV2 |
oracle/wss_username_token_client_policy(AIABasicCredentials) |
CreateSalesOrderEbizProvABCSImpl |
SalesOrderErrorResponseEBSV2 |
oracle/wss_username_token_client_policy(AIABasicCredentials) |
SyncSalesOrderEbizProvABCSImpl |
SalesOrderErrorResponseEBSV2 |
oracle/wss_username_token_client_policy(AIABasicCredentials) |
SyncCustomerPartyListEbizProvABCSImpl |
CustomerPartyErrorResponseEBSV2 |
oracle/wss_username_token_client_policy(AIABasicCredentials) |
For PIP implementation, see Oracle Application Integration Architecture Siebel CRM Integration Pack for Oracle Order Management: Order to Cash.
To undeploy the PIP from Fusion Middleware Server:
Navigate to <AIA_Instance>/bin and run the command source aiaenv.sh
for Linux based systems and aiaenv.bat
for Microsoft Windows to configure the environment.
Run the command for your platform.
Table 26-19 Undeployment Command for the Order to Cash: Siebel CRM - EBS PIP
Platform | Undeployment Command |
---|---|
Linux Solaris SPARC IBM AIX Based Systems HP-UX |
ant Uninstall -f <AIA_HOME>/Infrastructure/Install/AID/AIAInstallDriver.xml -DPropertiesFile=<AIA_HOME>/aia_instances/<AIA_Instance_name>/config/AIAInstallProperties.xml -DDeploymentPlan=<AIA_HOME>/pips/OrderToCash/DeploymentPlans/OrderToCashUndeployDP.xml -l <AIA_HOME>/pips/OrderToCash/DeploymentPlans/OrderToCashUndeployDP.log |
Microsoft Windows |
ant Uninstall -f <AIA_HOME>\Infrastructure\Install\AID\AIAInstallDriver.xml -DPropertiesFile=<AIA_HOME>\aia_instances\<AIA_Instance_name>\config\AIAInstallProperties.xml -DDeploymentPlan=<AIA_HOME>\pips\OrderToCash\DeploymentPlans\OrderToCashUndeployDP.xml -l <AIA_HOME>\pips\OrderToCash\DeploymentPlans\OrderToCashUndeployDP.log |
Session Pool Manager does not get undeployed when you undeploy the PIP as it belongs to common components. To undeploy Session Pool Manager, run the command specific to your platform.
Note:
Undeploy Session Pool Manager only if no other PIP is using it.Table 26-20 Undeployment Command for Session Pool Manager
Platform | Undeployment Command |
---|---|
Linux Solaris SPARC IBM AIX Based Systems. HP-UX |
ant Uninstall -f <AIA_HOME>/Infrastructure/Install/AID/AIAInstallDriver.xml -DPropertiesFile=<AIA_HOME>/aia_instances/<AIA_Instance_name>/config/AIAInstallProperties.xml -DDeploymentPlan=<AIA_HOME>/utilities/SessionPoolManager/V1/DeploymentPlans/SessionPoolManagerUndeployDP.xml |
Microsoft Windows |
ant Uninstall -f <AIA_HOME>\Infrastructure\Install\AID\AIAInstallDriver.xml -DPropertiesFile=<AIA_HOME>\aia_instances\<AIA_Instance_name>\config\AIAInstallProperties.xml -DDeploymentPlan=<AIA_HOME>\utilities\SessionPoolManager\V1\DeploymentPlans\SessionPoolManagerUndeployDP.xml |
Restart the SOA server.
Uninstall the PIP following the instructions in Chapter 36, "Uninstalling Oracle AIA."