HBAs are inserted into the PCIe3 slots in the riser board assemblies of the Replication Engine based on the configuration option selected.
The
Oracle FS System Replication Engine supports the following HBA options:
Table 1 Supported HBAs on the Replication EngineHBA
|
Quantity
|
8 Gb/s dual-port FC QLogic
|
Two
|
10 Gb/s dual-port Ethernet RJ45
|
Two
|
10 Gb/s dual-port Ethernet copper or fiber SFP+
|
Three
|
Note: A Replication Engine can support either two 10 Gb/s dual-port Ethernet RJ45 HBAs or three 10 Gb/s dual-port Ethernet copper or fiber SFP+ HBAs.
Note: The 8 Gb/s dual-port FC HBAs (if installed), will be in slots 3 and 6. The 10 Gb/s dual-port Ethernet RJ45 HBAs (if installed), will be in slots 2 and 5. The 10 Gb/s dual-port Ethernet copper or fiber SFP+ HBAs (if installed), will be in slots 2, 4, and 5.