- Rotate the drive compartment and backplane back into position inside the Replication Engine and ensure that the alignment pins engage. Note: To confirm that the backplane is locked into position, listen for an audible click or feel the backplane engage with the Replication Engine.
- Secure the backplane inside the Replication Engine by inserting the four Phillips Number 2 thumb screws on the four sides of the backplane and tightening them using a Phillips Number 2 screwdriver.
- Reconnect all the cables that had been previously disconnected from the backplane.Cables that must be reconnected include:
SATA or drive cable
Motherboard to HDD backplane cable
Figure 1: Reconnect cables to the backplane
- Legend
1 SATA or drive cable 2 NV-DIMM cable 3 Drive compartment 4 Backplane boards 5 Motherboard to HDD backplane cable