This chapter contains these topics:
Section 24.3, "Assigning a Routing Function to a Single Select Key,"
Section 24.4, "Assigning a Routing Function to Multiple Select Keys."
After you create a routing function, you must assign the function to one or more select keys. When you run a version, EBB processes the command string logic of the function that is assigned to the select keys. Unless you assign a function to a select key, it has no functionality.
For each select key, you must assign the PRINT routing function first. You cannot assign another routing function until you assign the PRINT function to the select key. You can only assign one routing function at a time.
Use the Maintain EBB Versions program (P98E10) to assign routing functions. Assign a routing function to a single select key or multiple select keys.
To assign a routing function, perform the following:
Assigning the PRINT Routing Function
Assigning a Routing Function to a Single Select Key
Assigning a Routing Function to Multiple Select Keys
From Electronic Burst and Bind (G98E), choose Maintain EBB Versions
The first time you assign a routing function to a select key, EBB confirms the assignment of the PRINT routing function. You must assign the PRINT routing function to the select key before assigning any other functions.
To assign the PRINT Routing Function
On Maintain EBB Versions, enter 2 in the Option field of the applicable version.
The select keys for the version display on Select Key Maintenance. When a function is assigned, an asterisk (*) displays next to select key.
Figure 24-1 Select Key Maintenance (PRINT Routing) screen
Review whether any function has been assigned to the select key with which you want to work.
If an asterisk displays, you do not need to continue because the PRINT function is assigned to the select key.
On Select Key Maintenance, enter 1 in the Option field of the applicable select key.
Figure 24-2 Entity/Function Maintenance (PRINT Routing) screen
Choose Add Function (F6).
The PRINT function parameters display on Entity/Function Parms Maintenance.
Figure 24-3 Entity/Function Parameters Maintenance screen
Press Enter, and then Exit (F3) this screen.
The PRINT function displays on Entity/Function Maintenance.
Figure 24-4 Entity/Function Maintenance (PRINT Displayed) screen
To assign a routing function, determine the output queue to which you want to route a select key.
If the PRINT routing function is not assigned to the select key with which you want to work, you must first assign the PRINT routing function.
To assign a routing function to a select key
On Maintain EBB Versions, enter 2 in the Option field of the applicable version.
On Select Key Maintenance, enter 1 in the Option field of the applicable select key.
Figure 24-5 Select Key Maintenance (Select Key) screen
On Entity/Function Maintenance, choose Add New Function For Entity (F6).
Figure 24-6 Entity/Function Maintenance (Add New) screen
On Entity/Function Parms Maintenance, choose Functions (F4).
Figure 24-7 Entity/Function Parameters Maintenance (Functions) screen
On Function Selection, enter 4 in the Option field next to the appropriate routing function.
The function parameters display on Entity/Function Parms Maintenance.
Figure 24-9 Entity/Function Parameters Maintenance (Displayed) screen
Accept the defaults or modify any of the following fields:
`Print Banner Page
`Parameters
Exit (F3) to Entity/Function Maintenance.
The additional routing function displays with other routing functions that are attached to the select key.
Figure 24-10 Entity/Function Maintenance (Added Function) screen
Exit (F3) to Select Key Maintenance.
An * displays next to the select key, indicating a successful function assignment.
Figure 24-11 Select Key Maintenance (* Displayed) screen
If you want to assign a routing function to multiple keys, assign the function globally rather than to each select key individually.
On Maintain EBB Versions, enter 2 in the Option field of the applicable version.
On Select Key Maintenance, enter 7 in the Option field of the select keys to which you want to assign a routing function.
On Entity/Function Maintenance - Global, choose Add Function (F6).
On Entity/Function Parms Maintenance Global, choose Functions (F4).
On Function Selection, enter 4 in the Option field next to the appropriate routing function.
The function parameters display on Entity Function Parms Maintenance Global.
Accept or modify any of the following fields and press Enter:
`Print Banner Page
`Parameters
Exit (F3) to Entity/Function Maintenance Global.
The additional routing function displays with other routing functions that are attached to the select key.