This list contains Electronic Burst and Bind messages along with the level of severity and message text for each.
Message ID | Severity | Message Text |
---|---|---|
EBB0002 | 0 | Last Record is Displayed |
EBB0003 | 0 | First Record is Displayed |
EBB0004 | 10 | Invalid Library, File, or Member Name |
EBB0005 | 10 | Valid Library Name Required |
EBB0006 | 10 | Valid Source File Name Required |
EBB0007 | 10 | Valid Member Name Required |
EBB0008 | 10 | Valid Output Queue Required |
EBB0009 | 0 | Parameters OK - press F10 to continue |
EBB0010 | 10 | AS/400 Model Number not found in program table |
EBB0011 | 10 | AS/400 Model Serial Number contains an invalid character |
EBB0013 | 10 | Customer Number not found on Address Book |
EBB0014 | 0 | Software Authorization has been logged |
EBB0016 | 10 | First-Time Installation must be Y or N |
EBB0017 | 10 | At least one library must be specified to contain EBB data files |
EBB0018 | 10 | At least one library must be specified containing the JD Edwards World setup files |
EBB0019 | 0 | Report Finished Successfully |
EBB0020 | 10 | Report DID NOT FINISH |
EBB0021 | 0 | Report Cancelled at User Request |
EBB0022 | 10 | Alpha or Date Sequence must be A or D |
EBB0023 | 10 | Re-install Backup response must be Y or yes or N for no |
EBB0024 | 10 | JD Edwards World Object Library must be specified |
EBB0026 | 10 | Target Release is not valid |
EBB0027 | 10 | Invalid Row. Row must be between 1 and 57 |
EBB0028 | 10 | Invalid Column. Column must be between 1 and 198 |
EBB0029 | 10 | Routing Description Invalid |
EBB0030 | 10 | Invalid Length Entered Length Must be Greater Than Zero For An ADD |
EBB0031 | 10 | Total Key Length Cannot Exceed 90 Positions |
EBB0032 | 10 | Invalid Delete, There are no records to be deleted |
EBB0033 | 10 | Sequence number already in use You may not duplicate sequence numbers |
EBB0034 | 10 | The key length selected can not be less than zero |
EBB0035 | 10 | Burst criteria must be on the same row |
EBB0040 | 0 | Preload Select Keys Is Running Please be patient |
EBB0041 | 0 | Pre Load Select Keys Has Completed, And Found xxx New Select Keys |
EBB0042 | 10 | Version xxx report xxx was not found in this OUTQ |
EBB0043 | 10 | Select Key Can Not Be Blank |
EBB0044 | 10 | Install to Separate Environment must be 'Y' or 'N' |
EBB0045 | 10 | Library not found Please check |
EBB0046 | 10 | EBB object library was found, and an initial install was requested Please check |
EBB0047 | 10 | EBB object library was not found, and a re-install was requested Please check |
EBB8000 | 10 | All reports for version: xxx must be in OUTQ EBBSTART and in Ready Status |
EBB8001 | 20 | No Functions Found For Version ID: xxx |
EBB8003 | 10 | EBB Spool File Not In Ready Status For Version ID |
EBB8004 | 0 | No EBB version found for spool file with userdata |
EBB8005 | 10 | Error in the Substitute Select Key process (See second level text) |
EBB8006 | 10 | Error in the Substitute Select Key process (See second level text) |
EBB8007 | 10 | Error in the Substitute Select Key process (See second level text) |
EBB8008 | 10 | Rebuild Cross Reference must be 'Y' or 'N' |
EBB8009 | 10 | If Rebuild is yes, a DREAM Writer Version must be entered |
EBB8010 | 10 | Table Name must be entered |
EBB8011 | 10 | Enter a 'Y' or 'N' in the Print Key field |
EBB8012 | 10 | Print Row must be between 1 and 99 |
EBB8013 | 10 | Print Position must be between 1 and 191 |
EBB8014 | 10 | Print Length must be between 1 and 191 |
EBB8015 | 10 | Date is not valid Please check |
EBB8900 | 10 | Invalid Version ID entered |
EBB9000 | 0 | EBB monitor started at [time] on [date] by [xxx] |
EBB9001 | 0 | EBB monitor ended at [time] on [date] by [xxx] |
EBB9002 | 10 | The EBB Monitor is Already Active |
EBB9801 | 20 | F0090 was not found in any of the selected common libraries |
EBB9802 | 20 | F9200 was not found in any of the selected common libraries |
EBB9803 | 20 | F9220 was not found in any of the selected common libraries |
EBB9804 | 20 | F9601 was not found in any of the selected common libraries |
EBB9805 | 20 | F9611 was not found in any of the selected common libraries |
EBB9806 | 20 | F9620 was not found in any of the selected common libraries |
EBB9807 | 20 | F9621 was not found in any of the selected common libraries |
EBB9808 | 20 | F9801 was not found in any of the selected common libraries |
EBB9809 | 20 | F98301 was not found in any of the selected common libraries |
EBB9810 | 20 | F0020 was not found in any of the selected common libraries |
EBB9811 | 20 | F9800 was not found in any of the selected common libraries |
EBB9900 | 0 | EBB Software Installation Completed Successfully |
EBB9904 | 10 | Library EBBLIB already exists - reinstall not requested |
EBB9905 | 10 | Library EBBLIB does not exist - reinstall requested |
EBB9906 | 0 | EBB Create Demo Tape finished successfully |
EBB9907 | 10 | EBB Demo Tape Create DID NOT COMPLETE |
EBB9908 | 0 | EBB Create Demo Tape cancelled by user request |
EBB9909 | 10 | Library specified for the JD Edwards World object library does not exist |
EBB9910 | 10 | System Code 60 is already in use on your system |
EBB9912 | 10 | Delay Time may not be zero or negative |
EBB9913 | 10 | EBB JOBQ Name may not be left blank |
EBB9914 | 10 | Invalid JOBQ Specified |
EBB9915 | 10 | Invalid Receiving OUTQ |
EBB9916 | 10 | Invalid Error OUTQ |
EBB9917 | 10 | Invalid Default JD Edwards World Dream Writer Source Library |
EBB9918 | 10 | Invalid JD Edwards World Dream Writer Source File |
EBB9919 | 10 | Invalid Function |
EBB9920 | 10 | Duplicate Version ID |
EBB9921 | 10 | You Must Enter A Version ID |
EBB9922 | 10 | You Must Enter A Version Description |
EBB9923 | 10 | Invalid Selection Must Be (Y,N) |
EBB9924 | 10 | The Demo Reports may not have loaded correctly |
EBB9931 | 10 | Auxiliary Storage Pool must be 1 - 16 |
EBB9932 | 0 | EBB data file library xxx created |
EBB9933 | 0 | EBB data area EBBFIL# created in library xxx |
EBB9934 | 0 | EBB data area QEBB created in library xxx |
EBB9935 | 0 | EBBFileF6001createdinlibraryxxx |
EBB9936 | 0 | EBBFileF6002createdinlibraryxxx |
EBB9937 | 0 | EBBFileF6004createdinlibraryxxx |
EBB9938 | 0 | EBBFileF6006createdinlibraryxxx |
EBB9939 | 0 | EBBFileF6006convertedfromVersion1xinlibraryxxx |
EBB9940 | 0 | EBBFileF6007createdinlibraryxxx |
EBB9941 | 0 | EBBFileF6007mergedwitholddatainlibraryxxx |
EBB9942 | 0 | EBBFileF6008createdinlibraryxxx |
EBB9943 | 0 | EBBFileF6008Icreatedinlibraryxxx |
EBB9944 | 0 | EBBFileF6009createdinlibraryxxx |
EBB9945 | 0 | EBBFileF6011createdinlibraryxxx |
EBB9946 | 0 | EBBFileF6020createdinlibraryxxx |
EBB9947 | 0 | EBBFileF6021createdinlibraryxxx |
EBB9948 | 0 | EBBFileF6021convertedfromVersionxxxinlibraryxxx |
EBB9949 | 0 | EBBOUTQ EBBERRQ created in library xxx |
EBB9950 | 0 | EBBOUTQ EBBSTART created in library xxx |
EBB9951 | 0 | EBBOUTQ EBBFINAL created in library xxx |
EBB9952 | 0 | EBBMSGQ EBBMSGQ created in library xxx |
EBB9953 | 0 | EBBJOBD EBBJOBD created in library xxx |
EBB9954 | 0 | This job will delete EBB install libraries. Do you want to proceed? (Y or N) |
EBB9988 | 20 | EBB Software Installation DID NOT COMPLETE-call support. |
EBB9989 | 0 | EBB Software Installation cancelled by user request |