This chapter provides information about the Systems Infrastructure Server - ILOM Access Point metrics. For each metric, it provides the following information:
Description
Metric table
The metric table can include some or all of the following: target version, default collection frequency, default warning threshold, default critical threshold, and alert text.
The metrics in this category provide information about the server temperature.
The metric provides the system temperature in degrees Celsius.
Target Version | Collection Frequency |
---|---|
All versions | Every Hour |
The metrics in this category provide information about the status of the switch aggregated system.
This metric provides the state of the cable connection.
Target Version | Collection Frequency |
---|---|
All versions | Every Hour |
This metric provides the change in cable connectivity.
Target Version | Collection Frequency |
---|---|
All versions | Every Hour |
This metric provides the cooling redundancy state.
Target Version | Collection Frequency |
---|---|
All versions | Every Hour |
This metric provides the overall cooling state.
Target Version | Collection Frequency |
---|---|
All versions | Every Hour |
This metric provides the health status.
Target Version | Collection Frequency |
---|---|
All versions | Every Hour |
This metric provides the InfiniBand state.
Target Version | Collection Frequency |
---|---|
All versions | Every Hour |
This metric provides the locator light.
Target Version | Collection Frequency |
---|---|
All versions | Every Hour |
This metric provides the power redundancy state.
Target Version | Collection Frequency |
---|---|
All versions | Every Hour |
This metric provides the overall power state.
Target Version | Collection Frequency |
---|---|
All versions | Every Hour |
The metrics in this category provide information about the status of the sensor.
This metric provides the value from the sensor.
Target Version | Collection Frequency |
---|---|
All versions | Every Hour |
This metric provides the status of the sensor.
Target Version | Evaluation and Collection Frequency | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|---|
All versions | Every Hour | Not Defined | critical | Fault found in sensor %SensorId% |
This metric provides the read value of the sensor.
Target Version | Collection Frequency |
---|---|
All versions | Every Hour |
The metrics in this category provide information about the status of the service processor.
This metric category provides information about the status of the Systems Infrastructure Server - ILOM Access Point target.
The metrics in this category provide information about power usage.
This metric provides the average power consumption per minute.
Target Version | Collection Frequency |
---|---|
All versions | Every Hour |
This metrics in this category provide information about the network ports performance.
This metric provides the vLAN ID.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the rate of total octet bits.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the measurement units for the speed.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the speed of the link.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the defined partition keys.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound unicast packets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the average of the outbound octet rate for this interface.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound octets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound multicast packets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound errors.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound discards.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the operational status of the port.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the specific duplex mode of the port.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the Maximum Transmission Unit (MTU) of the link.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of inbound packets with an unknown protocol.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of inbound unicast packets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the average of the inbound octet rate for this interface.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of inbound octets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of inbound multicast packets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of inbound errors.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metrics in this category provide information about the network ports InfiniBand performance.
This metrics in this category provide information about the network ports InfiniBand traffic statistics.
This metric provides the number of multicast packets received by the port since the last collection.
This metric provides the number of multicast packets sent to the port since the last collection.
This metric provides the number of packets received since the last collection.
This metric provides the number of unicast packets received since the last collection.
The metrics in this category provide information about the network ports InfiniBand error statistics.
This metric provides the number of link integrity errors, that is, the number of errors on the local link.
This metric provides the number of times the link error recovery process was completed successfully since the last collection.
This metric provides the number of received constraint errors received since the last collection.
This metric provides the number of received errors since the last collection.
This metric provides the number of symbol errors on the port since the last collection.
This metric provides the number of incoming VL15 packets dropped due to resource limitations on the port.
The metrics in this category provide information about the network interfaces performance.
This metric provides the status of the network interface.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the link state.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound packets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound overruns since the last collection.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the average of the outbound octet rate for this interface.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound octets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound errors.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound drops since the last collection.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound carrier errors.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of inbound packets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of overruns since the last collection.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the average of the inbound octet rate for this interface.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of inbound octets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of frame errors.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of inbound errors.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of inbound drops.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
The metrics in this category provide information about the network interfaces bandwidth.
This metric provides the percentage of output errors on the interface.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the average input operations over 10 minutes.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the percentage of input/output errors.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provide the percentage of input errors on the interface.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the average input operations over 10 minutes.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the amount of bandwidth used since the last collection.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the average percentage of activity over 10 minutes.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the average input/output operations over 10 minutes.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
The metrics in this category provide information about the Network Datalinks performance.
This metric provides the status of the datalink.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the link state.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound packets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the average of the outbound octet rate for this interface.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound octets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound multicasts.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound multicast octets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound errors.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound drops since the last collection.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound dropped octets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound broadcasts.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of outbound broadcast octets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of inbound packets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of inbound octets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of inbound multicasts.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of inbound multicast octets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of inbound errors.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of inbound drops.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of inbound dropped octets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of inbound broadcasts.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
This metric provides the number of inbound broadcast octets.
Target Version | Collection Frequency |
---|---|
All versions | Every 15 Minutes |
The metrics in this category provide information about the ILOM SNMP voltage traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides the threshold setting that has been crossed.
Target Version | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|
All versions | Not Defined | Not Defined | Voltage Threshold fault in %ComponentName%. Threshold of %ThresholdType% with %ThresholdValue%. SensorValue is %SensorValue% . |
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
This metric provides the threshold sensor's reading at the time the trap was generated.
This metric provides the name of the component that is the source of the trap.
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
The metrics in this category provide information about the ILOM SNMP temperature traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
The metrics in this category provide information about the ILOM SNMP storage volume traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides the name of the component that is the source of the trap.
This metric provides the probability (percentage) that the component is the source of the problem.
This metric provides the fault class, which represents a hierarchical classification string indicating the type of problem detected, as reported by the fault management subsystem.
This metric provides the status of the fault.
Target Version | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|
All versions | Not Defined | Not Defined | Storage Volume fault or error in %ComponentName%. FaultUUID of %FaultUUID% with certainty of %FaultCertainty%. ProbableCause=%StorageVolumeProbableCause%. |
The metrics in this category provide information about the ILOM SNMP temperature traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides the name of the component that is the source of the trap.
This metric provides the threshold sensor's reading at the time the trap was generated.
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
This metric provides the threshold setting that has been crossed.
Target Version | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|
All versions | Not Defined | Not Defined | Temperature Threshold fault in %ComponentName%. Threshold of %ThresholdType% with %ThresholdValue%. SensorValue is %SensorValue% . |
The metrics in this category provide information about the ILOM SNMP SlotOrConnector traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
This metric provides the status of the fault.
Target Version | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|
All versions | Not Defined | Not Defined | SlotOrConnector fault or error in %ComponentName%. FaultUUID of %FaultUUID% with certainty of %FaultCertainty%. |
This metric provides the fault class, which represents a hierarchical classification string indicating the type of problem detected, as reported by the fault management subsystem.
The metrics in this category provide information about the ILOM SNMP sensor traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides the threshold setting that has been crossed.
Target Version | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|
All versions | Not Defined | Not Defined | Sensor Threshold fault in %ComponentName%. Threshold of %ThresholdType% with %ThresholdValue%. SensorValue is %SensorValue% . |
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
The metrics in this category provide information about the ILOM SNMP security intrusion traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
The metrics in this category provide information about the ILOM SNMP processor traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
This metric provides the status of the fault.
Target Version | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|
All versions | Not Defined | Not Defined | Processor fault or error in %ComponentName%. FaultUUID of %FaultUUID% with certainty of %FaultCertainty%. |
This metric provides the fault class, which represents a hierarchical classification string indicating the type of problem detected, as reported by the fault management subsystem.
The metrics in this category provide information about the ILOM SNMP PreOSError traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
The metrics in this category provide information about the ILOM SNMP power supply traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
This metric provides the status of the fault.
Target Version | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|
All versions | Not Defined | Not Defined | Power Supply fault or error in %ComponentName%. FaultUUID of %FaultUUID% with certainty of %FaultCertainty%. |
This metric provides the fault class, which represents a hierarchical classification string indicating the type of problem detected, as reported by the fault management subsystem.
The metrics in this category provide information about the ILOM SNMP power consumption traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides the threshold setting that has been crossed.
Target Version | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|
All versions | Not Defined | Not Defined | PowerConsumption Threshold fault in %ComponentName%. Threshold of %ThresholdType% with %ThresholdValue%. SensorValue is %SensorValue% . |
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
The metrics in this category provide information about the ILOM SNMP memory traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
This metric provides the status of the fault.
Target Version | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|
All versions | Not Defined | Not Defined | Memory fault or error in %ComponentName%. FaultUUID of %FaultUUID% with certainty of %FaultCertainty%. |
This metric provides the fault class, which represents a hierarchical classification string indicating the type of problem detected, as reported by the fault management subsystem.
The metrics in this category provide information about the ILOM SNMP IO traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
This metric provides the status of the fault.
Target Version | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|
All versions | Not Defined | Not Defined | IO fault or error in %ComponentName%. FaultUUID of %FaultUUID% with certainty of %FaultCertainty%. |
This metric provides the fault class, which represents a hierarchical classification string indicating the type of problem detected, as reported by the fault management subsystem.
The metrics in this category provide information about the ILOM SNMP hard drive traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
This metric provides the status of the hard drive.
Target Version | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|
All versions | Not Defined | Not Defined | HardDrive status update for %ComponentName%. |
This metric provides information about the hard drive fault.
Target Version | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|
All versions | Not Defined | Not Defined | HardDrive fault or error in %ComponentName%. FaultUUID of %FaultUUID% with certainty of %FaultCertainty%. |
This metric provides the fault class, which represents a hierarchical classification string indicating the type of problem detected, as reported by the fault management subsystem.
The metrics in this category provide information about the ILOM SNMP HAState change traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
This metric provides the old value of the high availability state after a high availability state change has occurred.
This metric provides the new value of the high availability state after a high availability state change has occurred.
The metrics in this category provide information about the ILOM SNMP Field Replacement Unit (FRU) traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
The metrics in this category provide information about the ILOM SNMP fault diagnosed trap.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides the revision level of the FRU suspected of causing a fault.
This metric provides the name of the manufacturer of the FRU suspected of causing a fault.
This metric provides the fault class, which represents a hierarchical classification string indicating the type of problem detected, as reported by the fault management subsystem.
This metric provides the probability that the suspected FRU is the source of the problem.
This metric provides the chassis serial number of a Field Replaceable Unit (FRU) suspected of causing a fault.
This metric provides the number of suspected faults diagnosed as the cause of the reported hardware errors.
This metric provides the status of the fault.
Target Version | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|
All versions | Not Defined | Not Defined | FaultDiagnosed in %Hostname% with UUID %FaultUUID%. |
The metrics in this category provide information about the ILOM SNMP fan speed trap.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides the threshold setting that has been crossed.
Target Version | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|
All versions | Not Defined | Not Defined | FanSpeed Threshold fault in %ComponentName%. Threshold of %ThresholdType% with %ThresholdValue%. SensorValue is %SensorValue% . |
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
The metrics in this category provide information about ILOM SNMP fan traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
This metric provides the status of the fault.
Target Version | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|
All versions | Not Defined | Not Defined | Fan fault or error in %ComponentName%. FaultUUID of %FaultUUID% with certainty of %FaultCertainty%. |
This metric provides the fault class, which represents a hierarchical classification string indicating the type of problem detected, as reported by the fault management subsystem.
The metrics in this category provide information about the ILOM SNMP electrical current traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides the threshold setting that has been crossed.
Target Version | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|
All versions | Not Defined | Not Defined | ElectricalCurrent Threshold fault in %ComponentName%. Threshold of %ThresholdType% with %ThresholdValue%. SensorValue is %SensorValue% . |
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
The metrics in this category provide information about ILOM SNMP drive controller traps.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides an ID used to identify the source of the trap. Typically, this is the host name.
This metric provides the status of the fault.
Target Version | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|
All versions | Not Defined | Not Defined | DriveController fault or error in %ComponentName%. FaultUUID of %FaultUUID% with certainty of %FaultCertainty%. ProbableCause=%DriveControllerProbableCause%. |
This metric provides the fault class, which represents a hierarchical classification string indicating the type of problem detected, as reported by the fault management subsystem.
The metrics in this category provide information about the ILOM SNMP component trap.
There is no collection defined for these metrics because Enterprise Manager uses these metrics only to raise alerts when SNMP traps are received by the Management Agent.
This metric provides the name of the component that is the source of the trap.
This metric provides the probability (percentage) that the component is the source of the problem.
This metric provides the fault class, which represents a hierarchical classification string indicating the type of problem detected, as reported by the fault management subsystem.
The metrics in this category provide information about fan usage.
The metrics in this category provide information about the component state.
The metric provides information about errors.
Target Version | Collection Frequency |
---|---|
All versions | Every 72 Hours |
The metrics in this category provide information about component faults.
This metric provides the time that the problem occurred.
Target Version | Collection Frequency |
---|---|
All versions | Every 72 Hours |
This metric provides the universally unique identifier (UUID) of the open problem.
Target Version | Collection Frequency |
---|---|
All versions | Every 72 Hours |
This metric provides the status of the problem associated with the component.
Target Version | Default Warning Threshold | Default Critical Threshold | Alert Text |
---|---|---|---|
All versions | Not Defined | 1 | Fault found in %ComponentName% @ %ProblemOccurrenceTime%. Description: %OpenProblemDescription%, Probability: %OpenProblemProbability%, PartNumber: %ComponentPartNumber%, SerialNumber: %ComponentSerialNumber% |
This metric provides the URL to an Oracle Support reference document.
Target Version | Collection Frequency |
---|---|
All versions | Every 72 Hours |
This metric provides the probability of the open problem.
Target Version | Collection Frequency |
---|---|
All versions | Every 72 Hours |
This metric provides the description of the open problem.
Target Version | Collection Frequency |
---|---|
All versions | Every 72 Hours |
This metric provides the component subsystem name.
Target Version | Collection Frequency |
---|---|
All versions | Every 72 Hours |
This metric provides the serial number of the component.
Target Version | Collection Frequency |
---|---|
All versions | Every 72 Hours |
This metric provides the part number of the component.
Target Version | Collection Frequency |
---|---|
All versions | Every 72 Hours |