This chapter describes the minimum hardware and software requirements to install and operate the DIVArchive 7.3 software. Refer to "General Storage Requirements" for detailed disk configuration information.
A DIVArchive system uses a combination of software modules which can run on a single computer, or can be distributed across different systems.
The main DIVArchive components are as follows:
The core component of the archive also hosting the archive system database.
Based on Microsoft Cluster.
Responsible for all data transfers (Archive, Restore, Copy, Repack, and so on).
Systems running both Actor and Manager functions on a single computer. You should try to avoid this configuration for performance reasons. This is only usable for entry level configurations.
Systems running both Actor and Transcoder functions on a single computer.
Used in DIVAnet configuration for unified access. DIVAnet 2.0 is not a drop-in replacement for the legacy Access Gateway.
A web-based application to search and browse the archive.
Used for configuring, monitoring and managing the DIVArchive system.
The following figure represents a DIVArchive configuration with the main DIVArchive software components installed on different servers. The DIVArchive Access Gateway (legacy DIVAnet) used to access multiple DIVArchive systems is not represented and is generally installed on a dedicated server.
On the data path, a DIVArchive solution is connected on the storage side to the tape library and (or) the shared disks. On the source and destination side it is connected to the video servers, NLE, or file servers.
Storage Area Networks (SAN), Network Attached Storage (NAS) or Direct Attached technologies can be used. Different types of interfaces are required on the servers to support the different types of storage devices as follows:
Fiber Channel Host Based Adapter (HBA) for SAN
SCSI Bus or HBA for Direct Attach
10 Gigabit Ethernet (GbE) for NAS
Connections to video servers generally uses standard GbE or 10 GbE LAN technologies. Grass Valley legacy profile video servers come with two types of interfaces
Universal Interface Module (UIM) uses GbE
The legacy profile with direct Fiber attachment is now End of Life for Grass Valley and no longer supported by Oracle.
Oracle can deliver x86 architecture servers matching or exceeding the recommendations provided in the following sections (except the Windows license to be purchased). Partners can also purchase servers from other vendors if the minimum requirements are met. Oracle does not qualify or recommend specific models from other vendors.
Caution:
The operating system installed on all computers must be installed in the English language. Oracle cannot support DIVArchive computers that have the operating system installed in other languages.When upgrading your DIVArchive installation to release 7.3, use the following table to confirm that you have the proper operating system installed for each computer.
Component | DIVArchive Release | Operating System Compatibility (for upgrades only) |
---|---|---|
Manager | 7.3 | Windows Server 2008 R2 (64-bit)
Windows Server 2012 R2 (64-bit) |
Manager | 7.2 | Windows Server 2008 R2 (64-bit)
Windows Server 2012 R2 (64-bit) |
Actor | 7.3 | Windows Server 2008 R2 (64-bit only)
Windows Server 2012 R2 (64-bit only) |
Actor | 7.2 | Windows Server 2008 R2 (64-bit)
Windows Server 2012 R2 (64-bit) Windows Server 2008 Standard (32-bit) Windows Server 2003 (32-bit) |
DIVAnet | Legacy | Windows Server 2008 R2 (64-bit)
Windows Server 2012 R2 (64-bit) |
DIVAnet | 2.0 | Windows Server 2008 R2 (64-bit)
Windows 2012 R2 (64-bit) |
DIVAnet | Clients | 64-bit Windows 7 and later is required. |
The following server platform is the minimum requirement recommended for the installation of the DIVArchive Manager software:
Rack mount chassis
One Xeon E5-2420 CPU (six cores, 1.9 GHz)
16 GB RAM
Two 300 GB HDD 10,000 RPM (configured in RAID 1) system disks
Note:
If you use DIVArchive to archive complex objects like DPX, it is advisable to ask for a specific recommendation based on the estimated traffic (in terms of size and number of objects to be archived per day). In general, if complex objects need to be archived, Oracle recommends using a minimum of two 900 GB HDD with 10,000 RPM. This recommendation is also valid for the Backup Manager or an Actor if an Actor server is used for the Backup Manager.Redundant power supply and fans
Two onboard GbE interfaces (copper RJ45 interfaces)
One Fiber Channel Host Bus Adapter (HBA) for tape library control
Note:
A Fiber Channel HBA is not required with SONY Petasite libraries (controlled through the PCS software and a network API) or with Oracle StorageTek libraries if the ACSLS software is used in the configuration.Windows Server 2012 R2
Important: If ACSLS virtual libraries are used, an HBA will be required (consult with Oracle for more information).
The following server platform (two identical servers) is the minimum requirement recommended for the installation of the DIVArchive Manager software in a cluster environment:
Rack mount chassis
One Xeon E5-2420 CPU (six cores, 1.9 GHz)
16 GB RAM
Two 300 GB HDD 10,000 RPM (configured in RAID 1) system disks
Note:
If you use DIVArchive to archive complex objects like DPX, it is advisable to ask for a specific recommendation based on the estimated traffic (in terms of size and number of objects to be archived per day). In general, if complex objects need to be archived, Oracle recommends using a minimum of two 900 GB HDD with 10,000 RPM. This recommendation is also valid for the Backup Manager or an Actor if an Actor server is used for the Backup Manager.Redundant power supply and fans
Two onboard GbE interfaces (copper RJ45 interfaces)
One SAS or FC HBA (for the shared disk bay connection)
Note:
A shared disk bay with dual RAID controller (SAS or FC Interface) and seven 300 GB SAS disks connected to both servers to accommodate the Oracle database.One Fiber Channel HBA for tape library control
Note:
A Fiber Channel HBA is not required with SONY Petasite libraries (controlled through the PCS software and a network API) or with Oracle StorageTek libraries if the ACSLS software is used in the configuration.Windows Server 2012 R2
The following is the minimum server configuration recommended for the installation of the DIVArchive Actor software:
Rack mount chassis
One Xeon E5-2420 CPU (six cores, 1.9 GHz)
16 GB RAM
Two 300 GB HDD 10,000 RPM (configured in RAID 1) system disks
RAID5 disk space for cache, at least four 1TB disks
Optional RAID5 disk space for Nearline storage (DIVAgrid Architecture)
Note:
The DIVAgrid Architecture consists of aggregating direct-attached disks from multiple DIVArchive Actors into one single DIVArchive Array. The DIVArchive Manager distributes content it needs to store on this array across the different Actors composing the array. This provides a cost effective, high performance solution for Nearline disk storage and is ideal in workflows requiring temporary disk storage to enable the creation of multiple object instances and transcoding.Redundant power supply and fans
Two onboard GbE interfaces (copper RJ45 interfaces)
One 10 GbE interface (optional)
One Fiber Channel HBA for the connection to an external shared disk (optional)
One Fiber Channel HBA for the connection to the tape drives
Windows Server 2012 R2
The following is the minimum server configuration recommended for the installation of the DIVArchive Actor and DIVArchive Manager software on a single computer. This configuration should be limited to entry level systems for performances reasons:
Rack mount chassis
One Xeon E5-2420 CPU (six cores, 1.9 GHz)
16 GB RAM
Two 300 GB HDD 10,000 RPM (configured in RAID 1) system disks
Note:
If you use DIVArchive to archive complex objects like DPX, it is advisable to ask for a specific recommendation based on the estimated traffic (in terms of size and number of objects to be archived per day). In general, if complex objects need to be archived, Oracle recommends using a minimum of two 900 GB HDD with 10,000 RPM. This recommendation is also valid for the Backup Manager or an Actor if an Actor server is used for the Backup Manager.RAID5 disk space for cache - at least four 1 TB disks
Optional RAID5 disk space for Nearline storage (DIVAgrid Architecture)
Note:
The DIVAgrid Architecture consists of aggregating direct-attached disks from multiple DIVArchive Actors into one single DIVArchive Array. The DIVArchive Manager distributes content it needs to store on this array across the different Actors composing the array. This provides a cost effective, high performance solution for Nearline disk storage and is ideal in workflows requiring temporary disk storage to enable the creation of multiple object instances and transcoding.Redundant power supply and fans
Two GbE interfaces
One 10 GbE interface (optional)
One Fiber Channel HBA for the connection to an external shared disk (optional)
One Fiber Channel HBA for the connection to the tape drives
Note:
An additional port maybe required for the tape library control.Windows Server 2012 R2
The following is the minimum server configuration recommended for the installation of the DIVArchive Actor software and Transcoder on a single computer:
Rack mount chassis
Two Xeon E5-2440 CPUs (six cores, 2.4 GHz, 15 MB cache)
16 GB RAM
Two 300 GB HDD 10,000 (configured in RAID 1) system disks
RAID5 disk space for cache and transcoding, at least five 1 TB disks
Note:
The local disk is used as a temporary working disk for the transcoder. The recommended size is equal to MaxClipSize x 4. For example, 2 hours in D10 format requires 50 GB of storage per clip. Therefore, the transcoder local disk size must be 200 GB. A separate storage disk space is recommended for the archiving of the clips before or after transcoding.Optional RAID5 disk space for Nearline Storage (DIVAgrid Architecture)
Note:
The DIVAgrid Architecture consists of aggregating direct-attached disks from multiple DIVArchive Actors into one single DIVArchive Array. The DIVArchive Manager distributes content it needs to store on this array across the different Actors composing the array. This provides a cost effective, high performance solution for Nearline disk storage and is ideal in workflows requiring temporary disk storage to enable the creation of multiple object instances and transcoding.Redundant power supply and fans
Two onboard Gigabit Ethernet interfaces
One 10 GbE interface (optional)
One Fiber Channel HBA for the connection to an external shared disk (optional)
One Fiber Channel HBA for the connection to the tape drives
Windows Server 2012 R2
The DIVArchive Access Gateway is used in a DIVAnet configuration to provide a consolidated view of a distributed archive system. The following is the minimum server configuration recommended for the installation of the DIVArchive Access Gateway (legacy DIVAnet):
Rack mount chassis
One Xeon E5-2420 CPU (six cores, 1.9 GHz)
16 GB RAM
Two 300 GB HDD 10,000 (configured in RAID 1) system disks
One 10 GbE interfaces (optional)
Windows Server 2012 R2
DIVAdirector is Oracle's archive content management application providing a user friendly web-based window into assets stored in the DIVArchive system. DIVAdirector can play proxy versions of the archived clips, and can store the proxy files on local disks, SAN, or NAS disk storage. The following is the minimum server configuration recommended for the installation of DIVAdirector:
Rack mount chassis
Two Xeon E5-2440 CPUs (six cores, 2.4 GHz, 15 MB cache)
16 GB RAM
Two 300 GB HDD (configured in RAID 1) system disks
Redundant power supply and fans
RAID5 disk space proxy storage five 3 TB (if stored locally)
Two onboard GbE interfaces
One 10 GbE interface (optional)
Fiber Channel HBA for the connection to an external shared disk for proxy storage (optional)
Windows Server 2012 R2
The following table describes the main storage characteristics of the various components:
Server | CPU | System Disks | Cache and Defragment Disks | Data Disks |
---|---|---|---|---|
Manager Cluster | 1 | RAID1 | No | No |
Manager | 1 | RAID1 | No | No |
Actor | 1 | RAID1 | RAID5 | Nearline (optional) |
Actor and Manager | 1 | RAID1 | RAID5 | Nearline (optional) |
Actor and Transcoder | 2 | RAID1 | RAID5 | Transcoding area plus optional Nearline disk. |
Access Gateway | 1 | RAID1 | No | No |
DIVAdirector | 2 | RAID1 | No | RAID5 if no proxy external storage is attached. |
The following are the minimum partition sizes for the Manager computer. These minimum sizes are also valid for Actor and Manager Backup configuration.
300 GB RAID1 requires the following:
Primary Partition: 60 GB minimum for Windows operating system
Extended Partition: 285 GB minimum for the database, and including the following logical drives for backup:
E: 20 GB minimum
8KB cluster size
F: 5 GB (exact size, not larger)
4KB cluster size
G: 100 GB of free space if not used on another volume
H: 130 GB minimum
64KB cluster size
The following partition sizes are the minimum recommended sizes for the Actor computer and includes database backup synchronization.
300 GB RAID1 requires the following:
Primary Partition: 60 GB minimum for Windows operating system
H: 130 GB (Primary Partition)
G: 155 GB of free disk space if not used on another volume
RAID5 disk space is required for the following:
K: Cache space
S: Nearline storage space
X: Transcoding area if transcoder is hosted on the Actor computer
The following partition sizes are the minimum recommended sizes for the Actor computer without database backup synchronization:
300 GB RAID1 requires the following:
Primary Partition: 60 GB minimum for Windows operating system
G: 255 GB of free disk space if not used on another volume
RAID5 disk space is required for the following:
K: Cache space
S: Nearline storage space
X: Transcoding area if transcoder is hosted on the Actor computer