Controller Rail Kits

The Controller rail kit contains the following items:

One slide rail that attaches to the rack posts
One mounting bracket that attaches to the Controller chassis
CMA with six pre-installed cable clips
Package of mounting screws and nuts in assorted sizes to fit various types of racks and cabinets
Manufacturer's instruction sheet for the CMA

The following table summarizes the mounting hardware packaged with the Controller rail kits.

Table 1 Controller rail kit mounting screws
Contents of the mounting screw packet	Quantity	Usage
10-32 pan head screw	8	Assemble main and extender sections of left and right rails (Typically, left and right rails are shipped pre-assembled)
8-32 pan head screw	4	Mount left and right rails to front of cabinet rails
Metric M6 pan head screw	8	Mount left and right rails to back of cabinet rails Secure front of chassis to left and right cabinet rails
6–32 flat head screw	2	Secure back of chassis to left and right side rails

Tip: Ensure that you have all of the parts in the Controller rail kit before you begin the installation of the Controller rails on the rack and the Controller chassis.

To locate part numbers for the rail kits, open Oracle System Handbook (https://support.oracle.com/handbook_private/index.html) and go to the Oracle FS1 Flash Storage System components list. Part numbers are listed in the components list.