Lower the riser
onto the Controller motherboard
and press the riser edge connector securely into the socket.
Important! Ensure that
any HBAs that must be removed from the failed riser and placed onto
the replacement rise are inserted into the same slots on the replacement
riser.
Figure 1: Insert
riser
Legend
1 Riser
2 Controller motherboard
After the riser
is seated properly inside the Controller, tighten
the two captive Phillips screws on both sides of the riser to secure
the riser on the Controller motherboard.
Figure 2: Captive
screws to secure risers to the motherboard
Legend
1 Riser
3 with latch
3 Riser
1
2 Riser
2
4 Captive
screws
To install riser 3, lock the latch to secure the riser
to the Controller motherboard.
Figure 3: Riser
3 latch locked
Legend
1 Riser
3 latch
3 HBA
2 Riser
3
Reconnect any
previously removed internal or external cables to any HBAs installed
in the riser.
Repeat the above
steps for any additional risers that you are installing.