Navigation:
Identifies the node of the Pilot, which is either 1 or 2.
Displays the current operational mode of the Pilot.
Indicates which Pilot performs all configuration tasks that administrators request.
Indicates which Pilot acts as a secondary (passive) device and if the active Pilot fails over to this standby Pilot. The passive Pilot monitors the health of the active Pilot and Controller but is not active in managing the data resources of the Oracle FS System.
Indicates that the Pilot operational state could not be determined.
Displays the current operational state of the Pilot.
Indicates that the Pilot is operating normally.
Indicates that the Pilot has a minor error that requires attention at your earliest convenience.
Indicates that the Pilot has a major error that requires prompt action.
Indicates that the Pilot is starting up.
Indicates that the Pilot firmware is being updated.
Indicates that the Pilot is shutting down.
Indicates the state of the configuration server that runs from the active Pilot.
Indicates the connectivity status of the PilottoPilot interface connection.
Indicates that the port connection is normal and no administrator action is required.
Indicates that the port cannot connect.
Connection state cannot be determined.
Indicates the connectivity status of the PilottoController interface connection.
Indicates that the port connection is normal and no administrator action is required.
Indicates that the port cannot connect.
Connection state cannot be determined.
Indicates the connectivity status of the external management network.
Indicates that the port connection is normal and no administrator action is required.
Indicates that the port cannot connect.
Connection state cannot be determined.
Indicates the connectivity status of the internal Pilot‑to‑Pilot communication.
Indicates that the port connection is normal and no administrator action is required.
Indicates that the port cannot connect.
Connection state cannot be determined.
Indicates the connectivity status of the service port, which is reserved for Oracle use.
Indicates that the port connection is normal and no administrator action is required.
Indicates that the port cannot connect.
Connection state cannot be determined.
Identifies the connection reliability of the network interfaces.
Indicates that the connection is reliable.
Indicates that the connection is not reliable. You will need to perform troubleshooting to resolve the problem. Inconsistent status might not be caused by network issues, particularly on the Ethernet and the Serial ports.