View UPS Dialog

Navigation: System > Hardware > UPSs > Actions > View UPS

Displays properties of a selected uninterruptible power supply (UPS) device.

Name: Identifies the name of the UPS device. UPS names must be unique across the Oracle FS System and must be 256 or fewer UTF‑8 characters.
IP Address: Identifies the IP address that is assigned to the external UPS device.
SNMP Community: Identifies a community for which a specific trap host should receive traps that the Oracle FS System generates. You can specify different community strings for each trap host so that multiple administrators can receive specific types of SNMP traps. The default community string is publicpublic (lower case). It is recommend you change the default community string.

Note: This community string entered here must match the community string configured on the UPS device.

Current Status

Provides read‑only details and status about the UPS device. You cannot modify this information.

Model

Identifies the model number of the UPS device.

Firmware Revision

Identifies the firmware version that is installed on the UPS device.

Serial Number

Identifies the serial number of the UPS device.

Power Source

Identifies the source of the UPS power. Valid sources:

Battery Status

Identifies the status of the UPS batteries. Valid values:

Communication Status

Identifies the communication status between the UPS device and the Oracle FS System system. Valid values: