Prepares the specified FRU for replacement.
enclosure ‑replaceFru ‑enclosure enclosure‑id‑or‑fqn [‑abort ] { ‑powerCoolingModule powerCoolingModule‑fru‑number | ‑diskDrive diskDrive‑fru‑number | ‑chassis chassis‑fru‑number | ‑iom io‑module‑fru‑number [‑sasPort sasPort‑fru‑number] } [{‑sessionKey | ‑u admin‑user ‑oracleFS oracle‑fs‑system}] [{‑outputformat | ‑o} { text | xml }] [{‑timeout timeout‑in‑seconds | ‑verify | ‑usage | ‑example | ‑help}]
In most instances, when replacing a FRU, you use Guided Maintenance, not the Oracle FS CLI. In rare instances, however, an Oracle Customer Support representative might direct you to use the FSCLI. When issuing the enclosure commands, follow the instructions that are provided to you by Oracle Customer Support.
Cancels the processes that prepare the specified FRU for replacement.
Stops all I/O traffic to the Drive Enclosure.
Marks all of the drive groups as missing.
Marks all of the volumes that are provisioned on the Drive Enclosure as offline.
Marks the Drive Enclosure as missing.
Powers down the Drive Enclosure.
Specifies the slot number of the drive to replace. The Oracle FS System marks the drive slot as EMPTY and marks the drive in the drive group as MISSING. Values are 0 to 23 for rotating media (performance or archive). Values are 0 to 18 for SSDs.
Specifies the fully qualified name (FQN) or unique identifier (ID) of the Drive Enclosure that contains the FRU to replace. The FQN includes the chassis ID, which is displayed on the front of the Drive Enclosure.
Specifies the FRU number for the I/O module to replace. Valid values are 0 and 1.
Specifies the power cooling module to replace. To prepare a power cooling module for replacement, the system powers off the module and marks it as missing. Values are 0 or 1.
Specifies the SAS port on an I/O Module to replace. The ‑sasPort option must be specified with the -iom option. SAS port values are 0, 1, and 2.
The following global options can be used for fully formed fscli commands:
The command completes successfully.
The command returns with an error.
The session times out.
Inspects the validity of the command syntax, not the semantics. Used to test the structure of a command without running the command. Does not determine whether errors would be produced if you issue a structurally correct command with the input provided.
Directs the CLI to prompt you to supply a session key when you issue the command. The CLI displays Sessionkey: as the prompt. To obtain a session key, log in with the ‑returnKey option specified. After the session is established, the session key is displayed in STDOUT. If you request a session key, the ‑sessionkey option is required syntax for all commands that are issued in a given session. In environments with more than one Oracle FS System, the session key is used to determine to which Oracle FS System to direct the command for validation. Session keys are also used to establish two or more CLI sessions when using a shared administrator account.