Table 5-13 Assembly/Class Fields
Field | Description |
---|---|
Description |
Enter a description for the payment driver (for example, Fusebox Payment Driver). |
Display Name |
Enter the name of the third-party driver development company (for example, Elavon). This value appears in the Driver drop-down list. |
Driver ID |
Enter FB. |
Bank Identification Number
Batch Number
Merchant Number
Store Number
Terminal Number
The values in these fields cannot be 0 (zero) or blank.
Table 5-14 Transport Service Properties Fields
Field | Description |
---|---|
Batching Host |
|
Batching Host Port |
|
Host Timeout |
Enter the timeout value in seconds. Setting the value to 0 (zero) equals no timeout. Do not leave this field blank. |
Primary Host |
Enter the IP address of the machine that runs the stunnel application.
|
Primary Host Port |
|
Table 5-15 Elavon Driver Properties Fields
Field | Description |
---|---|
Chain Code |
Elavon assigns the six-character alphanumeric code, which is used for key management in gateway environments. The Chain Code is used with Fusebox, but not with ProtoBase. |
LocationName |
If Elavon supplied a Location Name or Source IP Adress to pass from the Point-of-Sale (POS), enter it here. This value passes on every transaction and can be the location name or Fusebox workstation. You can leave this field blank. The LocationName is used with Fusebox, but not with ProtoBase. |
TerminationID |
Enter the terminal code assigned by Elavon for the property to use with credit cards. |
TransactionInquiryRetryDelayTimeoutMS |
After a communication failure with Fusebox, Simphony sends an inquiry to Fusebox to discover the cause of failure. This value is the amount of time Simphony waits before sending the request when a failure occurs. Oracle Hospitality recommends entering 5000. |