USB printer configuration for MICROS Retail OSCAR POS

The USB-Printer connection will be done via "libusb" in MICROS Retail OSCAR POS. The required software is not part of MICROS-Retail POS OSCAR or Windows standard and must be separately downloaded as the file "libusb-win32-device am 0.1.12.1.tar.gz" and unzipped to any folder.

The printer configuration proceed as described below:

 

  1. To recognize the device manufacturer ID and to generate * .inf and * .cat files for the corresponding USB device, you need the program "inf-wizard.exe" in the subdirectory..\Bin"start. The device must be connected to any USB port and turned on.






  1. Follow the instructions in the program "inf-wizard.exe". As a result, you get a "* .inf" and "* .cat" file for the device installation in the Windows Device Manager.




  1. Then open the Device Manager in Windows. You open the context menu with a right click on the "LibUSB-Win32Device". Select the menu item "Update driver".



  2. Follow the instructions in the Hardware Update Wizard and select "install from a list or specific location. Select the folder of the previously generated * .inf file and install the device driver.

  3. Now, you can use the MICROS Retail OSCAR POS device.

  4. The following settings are necessary in MICROS Retail OSCAR POS:


Select the type "USB device connection" as a device connection and enter the previously identified device name

  1. Select the type "USB device specification" as a device connection and enter the previously identified device name:

Device interface

90

Descriptor

Device name

Device nameee

4b8:202

Typ

USB device specification


The device name information you can find with performing the command "UsbMain.exe" in the directory...\bin by MICROS Retail OSCAR POS


Following devices have been found:

  Device 4b8:202

    Manufacturer / Product / Serial : EPSON / TM-T88V / 405558460000540000

 Click on the graphic to return to the Table of Contents.

 

MICROS Retail Deutschland GmbH
Salzufer 8
D-10587 Berlin