The program description is divided up as follows:
The data for a generic display can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed.
The interface and link to a processing unit must also be defined in addition to the device-specific data of the generic display and the device-specific operating mode of the display must be set.
The following details all options available for update of the basic data.
The following applies to this program:
Field with firmly defined selection options
Select one of the offered debug levels by clicking on the field and confirming the selection with a second click.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a protocol is required for communication with the device for
error analysis. The data is provided in file "errlog" in directory work
of the appropriate system unit.
Field with firmly defined selection options
Select one of the offered types of display by clicking on this field and with a second click confirming the selection.
Note:
The prerequisite for selection of the display type is that the appropriate type
is stored in the system. If no display type has been programmed, a click on the
button will open the window Display description. The Display
type can then be programmed.
The system offers the following display types:
·
IBM SurePos 500 =
·
Madisa
·
Toshiba LIUST-51
·
MICROS Display
·
MICROS Display Denmark
· MICROS Display Norway
· HP Display
·
Panasonic JS 935
Attention! This Display type is only available if
the environment variable "OSCAR_OPTIONS=PanasonicHW" was set in the
file "oscar.ini".
For this display, the device character set 3 is (JS 935 Display) created, to control the display and the display of umlauts. The
new toggle, Activate
DTR and Activate RTS must be disabled, otherwise
the display remains inactive. As device interface, you must specify COM3.
Entry range permitted: numeric
Enter the number of the line which is to be used for the start of the scrolling area.
Entry range permitted: numeric
Enter the number of the line which is to be used for the end of the scrolling area. The value entered here must be higher than the one used for the start scroll area.
Field with firmly defined selection options
Select one of the offered operation types for the use of the generic display by clicking on this field and with a second click confirming the selection.
The system offers the following:
Select one of the offered conversion types to present the characters. Click onto this field and with a second click confirm the option required.
The system offers the following:
Field with firmly defined selection options
Select one of the offered baud rates by clicking on this field and with a second click confirming the selection.
The system offers the following:
Field with firmly defined selection options
Select one of the offered parameters for use of the generic display by clicking on this field and with a second click confirming the selection.
The system offers the following:
Field with firmly defined selection options
Select one of the offered parameters for use of the generic display by clicking on this field and with a second click confirming the selection.
The system offers the following parameters:
Field with firmly defined selection options
Select one of the offered parameters for use of the generic display by clicking on this field and with a second click confirming the selection.
The system offers the following:
Field with firmly defined selection options
Select one of the offered parameters for use of the generic display by clicking on this field and with a second click confirming the selection.
The system offers the following: