The program description deals with the following:
The data for a device of type SNI keyboard can be updated, i.e. programmed, changed or cleared, with this program. Data which already exists can also be displayed for information.
The interface and link to a processing unit should be defined and the device-specific operating mode set.
Note:
When using this keyboard under LINUX, the "X SERVER" option must
be set for the associated process unit of the terminal.
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Field with firmly defined selection options
Select one of the offered debug levels by clicking on the fiekd and with a second click to confirm the option required.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a protocol for the communication of the keyboard is required
for error analysis. Information can be found in file "errlog" in
directory work of the appropriate system unit.
Entry range permitted: numeric 1 - 9999
Enter a keyboard ID no. for the keyboard which is to be linked for use in the sales program. If the number is not known, the data record can be selected with the search function.
Switch active: A central lock can be connected to this keyboard
Switch deactivated: No central lock is connected to this keyboard
Default = 0
Enter the value for the lock position. This value is used, amongst other things, in program Terminal profile to check the various POS functions.
Default = 1
Enter the value for the lock position. This value is used, amongst other things, in program Terminal profile to check the various POS functions.
Default = 2
Enter the value for the lock position. This value is used, amongst other things, in program Terminal profile to check the various POS functions.
Default = 3
Enter the value for the lock position. This value is used, amongst other things, in program Terminal profile to check the various POS functions.
Default = 4
Enter the value for the lock position. This value is used, amongst other things, in program Terminal profile to check the various POS functions.
Default = -1
Enter the value for the lock position. This value is used, amongst other things, in program Terminal profile to check the various POS functions.
Default = 5
Enter the value for the lock position. This value is used, amongst other things, in program Terminal profile to check the various POS functions.