The program description deals with the following:
The data for configuration of a virtual EFT can be updated, i.e. created, changed or deleted, with the program. Data which has already been stored can also be displayed.
The interface and link to an interface, processing unit should be defined and the device-specific operating mode of the device set.
Note:
Virtual devices are only intended for test purposes if connection of devices is not possible for whatever reason. Java 1.4 or newer versions should be installed if virtual devices (printer, display, drawer, lock, scanner or EFT) are to be tested.
A device interface type IP address should be configured and the device name, the local IP no. (localhost) and the port no. (5440) (locahost:5440) entered. In this example 5452 should be used as the port no. for the virtual EFT.
All options available for update of the basic data have been described below.
As with nearly all programs the following also applies here:
Field with firmly defined selection options
Select one of the debug levels offered by clicking on this field and with a second click confirming the option selected.
The system offers the following:
Notes:
Only select a value higher than "0" for
the debug level if a protocol of the communication of the device is required
for error analysis.
Entry range permitted: numeric, 1 - 9
Default =1
Entry range permitted: numeric, 1 - 99999
Enter the port no. of the virtual EFT.
Example:
Entry "localhost:5440" stands for the interface type IP address. Port
no. 5452 should be entered for the virtual EFT.
Entry range permitted: numeric, 1 - 999999999
Default =16000 Byte